tools/quake3/q3map2/lightmaps_ydnar.c

   1 /* -------------------------------------------------------------------------------
   2
   3 Copyright (C) 1999-2007 id Software, Inc. and contributors.
   4 For a list of contributors, see the accompanying CONTRIBUTORS file.
   5
   6 This file is part of GtkRadiant.
   7
   8 GtkRadiant is free software; you can redistribute it and/or modify
   9 it under the terms of the GNU General Public License as published by
  10 the Free Software Foundation; either version 2 of the License, or
  11 (at your option) any later version.
  12
  13 GtkRadiant is distributed in the hope that it will be useful,
  14 but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 GNU General Public License for more details.
  17
  18 You should have received a copy of the GNU General Public License
  19 along with GtkRadiant; if not, write to the Free Software
  20 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  21
  22 ----------------------------------------------------------------------------------
  23
  24 This code has been altered significantly from its original form, to support
  25 several games based on the Quake III Arena engine, in the form of "Q3Map2."
  26
  27 ------------------------------------------------------------------------------- */
  28
  29
  30
  31 /* marker */
  32 #define LIGHTMAPS_YDNAR_C
  33
  34
  35
  36 /* dependencies */
  37 #include "q3map2.h"
  38
  39
  40
  41
  42 /* -------------------------------------------------------------------------------
  43
  44 this file contains code that doe lightmap allocation and projection that
  45 runs in the -light phase.
  46
  47 this is handled here rather than in the bsp phase for a few reasons--
  48 surfaces are no longer necessarily convex polygons, patches may or may not be
  49 planar or have lightmaps projected directly onto control points.
  50
  51 also, this allows lightmaps to be calculated before being allocated and stored
  52 in the bsp. lightmaps that have little high-frequency information are candidates
  53 for having their resolutions scaled down.
  54
  55 ------------------------------------------------------------------------------- */
  56
  57 /*
  58 WriteTGA24()
  59 based on WriteTGA() from imagelib.c
  60 */
  61
  62 void WriteTGA24( char *filename, byte *data, int width, int height, qboolean flip )
  63 {
  64         int             i, c;
  65         byte    *buffer, *in;
  66         FILE    *file;
  67
  68
  69         /* allocate a buffer and set it up */
  70         buffer = safe_malloc( width * height * 3 + 18 );
  71         memset( buffer, 0, 18 );
  72         buffer[ 2 ] = 2;
  73         buffer[ 12 ] = width & 255;
  74         buffer[ 13 ] = width >> 8;
  75         buffer[ 14 ] = height & 255;
  76         buffer[ 15 ] = height >> 8;
  77         buffer[ 16 ] = 24;
  78
  79         /* swap rgb to bgr */
  80         c = (width * height * 3) + 18;
  81         for( i = 18; i < c; i += 3 )
  82         {
  83                 buffer[ i ] = data[ i - 18 + 2 ];               /* blue */
  84                 buffer[ i + 1 ] = data[ i - 18 + 1 ];   /* green */
  85                 buffer[ i + 2 ] = data[ i - 18 + 0 ];   /* red */
  86         }
  87
  88         /* write it and free the buffer */
  89         file = fopen( filename, "wb" );
  90         if( file == NULL )
  91                 Error( "Unable to open %s for writing", filename );
  92
  93         /* flip vertically? */
  94         if( flip )
  95         {
  96                 fwrite( buffer, 1, 18, file );
  97                 for( in = buffer + ((height - 1) * width * 3) + 18; in >= buffer; in -= (width * 3) )
  98                         fwrite( in, 1, (width * 3), file );
  99         }
 100         else
 101                 fwrite( buffer, 1, c, file );
 102
 103         /* close the file */
 104         fclose( file );
 105         free( buffer );
 106 }
 107
 108
 109
 110 /*
 111 ExportLightmaps()
 112 exports the lightmaps as a list of numbered tga images
 113 */
 114
 115 void ExportLightmaps( void )
 116 {
 117         int                     i;
 118         char            dirname[ 1024 ], filename[ 1024 ];
 119         byte            *lightmap;
 120
 121
 122         /* note it */
 123         Sys_FPrintf( SYS_VRB, "--- ExportLightmaps ---\n");
 124
 125         /* do some path mangling */
 126         strcpy( dirname, source );
 127         StripExtension( dirname );
 128
 129         /* sanity check */
 130         if( bspLightBytes == NULL )
 131         {
 132                 Sys_Printf( "WARNING: No BSP lightmap data\n" );
 133                 return;
 134         }
 135
 136         /* make a directory for the lightmaps */
 137         Q_mkdir( dirname );
 138
 139         /* iterate through the lightmaps */
 140         for( i = 0, lightmap = bspLightBytes; lightmap < (bspLightBytes + numBSPLightBytes); i++, lightmap += (game->lightmapSize * game->lightmapSize * 3) )
 141         {
 142                 /* write a tga image out */
 143                 sprintf( filename, "%s/lightmap_%04d.tga", dirname, i );
 144                 Sys_Printf( "Writing %s\n", filename );
 145                 WriteTGA24( filename, lightmap, game->lightmapSize, game->lightmapSize, qfalse );
 146         }
 147 }
 148
 149
 150
 151 /*
 152 ExportLightmapsMain()
 153 exports the lightmaps as a list of numbered tga images
 154 */
 155
 156 int ExportLightmapsMain( int argc, char **argv )
 157 {
 158         /* arg checking */
 159         if( argc < 1 )
 160         {
 161                 Sys_Printf( "Usage: q3map -export [-v] <mapname>\n" );
 162                 return 0;
 163         }
 164
 165         /* do some path mangling */
 166         strcpy( source, ExpandArg( argv[ argc - 1 ] ) );
 167         StripExtension( source );
 168         DefaultExtension( source, ".bsp" );
 169
 170         /* load the bsp */
 171         Sys_Printf( "Loading %s\n", source );
 172         LoadBSPFile( source );
 173
 174         /* export the lightmaps */
 175         ExportLightmaps();
 176
 177         /* return to sender */
 178         return 0;
 179 }
 180
 181
 182
 183 /*
 184 ImportLightmapsMain()
 185 imports the lightmaps from a list of numbered tga images
 186 */
 187
 188 int ImportLightmapsMain( int argc, char **argv )
 189 {
 190         int                     i, x, y, len, width, height;
 191         char            dirname[ 1024 ], filename[ 1024 ];
 192         byte            *lightmap, *buffer, *pixels, *in, *out;
 193
 194
 195         /* arg checking */
 196         if( argc < 1 )
 197         {
 198                 Sys_Printf( "Usage: q3map -import [-v] <mapname>\n" );
 199                 return 0;
 200         }
 201
 202         /* do some path mangling */
 203         strcpy( source, ExpandArg( argv[ argc - 1 ] ) );
 204         StripExtension( source );
 205         DefaultExtension( source, ".bsp" );
 206
 207         /* load the bsp */
 208         Sys_Printf( "Loading %s\n", source );
 209         LoadBSPFile( source );
 210
 211         /* note it */
 212         Sys_FPrintf( SYS_VRB, "--- ImportLightmaps ---\n");
 213
 214         /* do some path mangling */
 215         strcpy( dirname, source );
 216         StripExtension( dirname );
 217
 218         /* sanity check */
 219         if( bspLightBytes == NULL )
 220                 Error( "No lightmap data" );
 221
 222         /* make a directory for the lightmaps */
 223         Q_mkdir( dirname );
 224
 225         /* iterate through the lightmaps */
 226         for( i = 0, lightmap = bspLightBytes; lightmap < (bspLightBytes + numBSPLightBytes); i++, lightmap += (game->lightmapSize * game->lightmapSize * 3) )
 227         {
 228                 /* read a tga image */
 229                 sprintf( filename, "%s/lightmap_%04d.tga", dirname, i );
 230                 Sys_Printf( "Loading %s\n", filename );
 231                 buffer = NULL;
 232                 len = vfsLoadFile( filename, (void*) &buffer, -1 );
 233                 if( len < 0 )
 234                 {
 235                         Sys_Printf( "WARNING: Unable to load image %s\n", filename );
 236                         continue;
 237                 }
 238
 239                 /* parse file into an image */
 240                 pixels = NULL;
 241                 LoadTGABuffer( buffer, buffer + len, &pixels, &width, &height );
 242                 free( buffer );
 243
 244                 /* sanity check it */
 245                 if( pixels == NULL )
 246                 {
 247                         Sys_Printf( "WARNING: Unable to load image %s\n", filename );
 248                         continue;
 249                 }
 250                 if( width != game->lightmapSize || height != game->lightmapSize )
 251                         Sys_Printf( "WARNING: Image %s is not the right size (%d, %d) != (%d, %d)\n",
 252                                 filename, width, height, game->lightmapSize, game->lightmapSize );
 253
 254                 /* copy the pixels */
 255                 in = pixels;
 256                 for( y = 1; y <= game->lightmapSize; y++ )
 257                 {
 258                         out = lightmap + ((game->lightmapSize - y) * game->lightmapSize * 3);
 259                         for( x = 0; x < game->lightmapSize; x++, in += 4, out += 3 )
 260                                 VectorCopy( in, out );
 261                 }
 262
 263                 /* free the image */
 264                 free( pixels );
 265         }
 266
 267         /* write the bsp */
 268         Sys_Printf( "writing %s\n", source );
 269         WriteBSPFile( source );
 270
 271         /* return to sender */
 272         return 0;
 273 }
 274
 275
 276
 277 /* -------------------------------------------------------------------------------
 278
 279 this section deals with projecting a lightmap onto a raw drawsurface
 280
 281 ------------------------------------------------------------------------------- */
 282
 283 /*
 284 CompareLightSurface()
 285 compare function for qsort()
 286 */
 287
 288 static int CompareLightSurface( const void *a, const void *b )
 289 {
 290         shaderInfo_t    *asi, *bsi;
 291
 292
 293         /* get shaders */
 294         asi = surfaceInfos[ *((int*) a) ].si;
 295         bsi = surfaceInfos[ *((int*) b) ].si;
 296
 297         /* dummy check */
 298         if( asi == NULL )
 299                 return -1;
 300         if( bsi == NULL )
 301                 return 1;
 302
 303         /* compare shader names */
 304         return strcmp( asi->shader, bsi->shader );
 305 }
 306
 307
 308
 309 /*
 310 FinishRawLightmap()
 311 allocates a raw lightmap's necessary buffers
 312 */
 313
 314 void FinishRawLightmap( rawLightmap_t *lm )
 315 {
 316         int                                     i, j, c, size, *sc;
 317         float                           is;
 318         surfaceInfo_t           *info;
 319
 320
 321         /* sort light surfaces by shader name */
 322         qsort( &lightSurfaces[ lm->firstLightSurface ], lm->numLightSurfaces, sizeof( int ), CompareLightSurface );
 323
 324         /* count clusters */
 325         lm->numLightClusters = 0;
 326         for( i = 0; i < lm->numLightSurfaces; i++ )
 327         {
 328                 /* get surface info */
 329                 info = &surfaceInfos[ lightSurfaces[ lm->firstLightSurface + i ] ];
 330
 331                 /* add surface clusters */
 332                 lm->numLightClusters += info->numSurfaceClusters;
 333         }
 334
 335         /* allocate buffer for clusters and copy */
 336         lm->lightClusters = safe_malloc( lm->numLightClusters * sizeof( *lm->lightClusters ) );
 337         c = 0;
 338         for( i = 0; i < lm->numLightSurfaces; i++ )
 339         {
 340                 /* get surface info */
 341                 info = &surfaceInfos[ lightSurfaces[ lm->firstLightSurface + i ] ];
 342
 343                 /* add surface clusters */
 344                 for( j = 0; j < info->numSurfaceClusters; j++ )
 345                         lm->lightClusters[ c++ ] = surfaceClusters[ info->firstSurfaceCluster + j ];
 346         }
 347
 348         /* set styles */
 349         lm->styles[ 0 ] = LS_NORMAL;
 350         for( i = 1; i < MAX_LIGHTMAPS; i++ )
 351                 lm->styles[ i ] = LS_NONE;
 352
 353         /* set supersampling size */
 354         lm->sw = lm->w * superSample;
 355         lm->sh = lm->h * superSample;
 356
 357         /* add to super luxel count */
 358         numRawSuperLuxels += (lm->sw * lm->sh);
 359
 360         /* manipulate origin/vecs for supersampling */
 361         if( superSample > 1 && lm->vecs != NULL )
 362         {
 363                 /* calc inverse supersample */
 364                 is = 1.0f / superSample;
 365
 366                 /* scale the vectors and shift the origin */
 367                 #if 1
 368                         /* new code that works for arbitrary supersampling values */
 369                         VectorMA( lm->origin, -0.5, lm->vecs[ 0 ], lm->origin );
 370                         VectorMA( lm->origin, -0.5, lm->vecs[ 1 ], lm->origin );
 371                         VectorScale( lm->vecs[ 0 ], is, lm->vecs[ 0 ] );
 372                         VectorScale( lm->vecs[ 1 ], is, lm->vecs[ 1 ] );
 373                         VectorMA( lm->origin, is, lm->vecs[ 0 ], lm->origin );
 374                         VectorMA( lm->origin, is, lm->vecs[ 1 ], lm->origin );
 375                 #else
 376                         /* old code that only worked with a value of 2 */
 377                         VectorScale( lm->vecs[ 0 ], is, lm->vecs[ 0 ] );
 378                         VectorScale( lm->vecs[ 1 ], is, lm->vecs[ 1 ] );
 379                         VectorMA( lm->origin, -is, lm->vecs[ 0 ], lm->origin );
 380                         VectorMA( lm->origin, -is, lm->vecs[ 1 ], lm->origin );
 381                 #endif
 382         }
 383
 384         /* allocate bsp lightmap storage */
 385         size = lm->w * lm->h * BSP_LUXEL_SIZE * sizeof( float );
 386         if( lm->bspLuxels[ 0 ] == NULL )
 387                 lm->bspLuxels[ 0 ] = safe_malloc( size );
 388         memset( lm->bspLuxels[ 0 ], 0, size );
 389
 390         /* allocate radiosity lightmap storage */
 391         if( bounce )
 392         {
 393                 size = lm->w * lm->h * RAD_LUXEL_SIZE * sizeof( float );
 394                 if( lm->radLuxels[ 0 ] == NULL )
 395                         lm->radLuxels[ 0 ] = safe_malloc( size );
 396                 memset( lm->radLuxels[ 0 ], 0, size );
 397         }
 398
 399         /* allocate sampling lightmap storage */
 400         size = lm->sw * lm->sh * SUPER_LUXEL_SIZE * sizeof( float );
 401         if( lm->superLuxels[ 0 ] == NULL )
 402                 lm->superLuxels[ 0 ] = safe_malloc( size );
 403         memset( lm->superLuxels[ 0 ], 0, size );
 404
 405         /* allocate origin map storage */
 406         size = lm->sw * lm->sh * SUPER_ORIGIN_SIZE * sizeof( float );
 407         if( lm->superOrigins == NULL )
 408                 lm->superOrigins = safe_malloc( size );
 409         memset( lm->superOrigins, 0, size );
 410
 411         /* allocate normal map storage */
 412         size = lm->sw * lm->sh * SUPER_NORMAL_SIZE * sizeof( float );
 413         if( lm->superNormals == NULL )
 414                 lm->superNormals = safe_malloc( size );
 415         memset( lm->superNormals, 0, size );
 416
 417         /* allocate floodlight map storage */
 418         size = lm->sw * lm->sh * SUPER_FLOODLIGHT_SIZE * sizeof( float );
 419         if( lm->superFloodLight == NULL )
 420                 lm->superFloodLight = safe_malloc( size );
 421         memset( lm->superFloodLight, 0, size );
 422
 423         /* allocate cluster map storage */
 424         size = lm->sw * lm->sh * sizeof( int );
 425         if( lm->superClusters == NULL )
 426                 lm->superClusters = safe_malloc( size );
 427         size = lm->sw * lm->sh;
 428         sc = lm->superClusters;
 429         for( i = 0; i < size; i++ )
 430                 (*sc++) = CLUSTER_UNMAPPED;
 431
 432         /* deluxemap allocation */
 433         if( deluxemap )
 434         {
 435                 /* allocate sampling deluxel storage */
 436                 size = lm->sw * lm->sh * SUPER_DELUXEL_SIZE * sizeof( float );
 437                 if( lm->superDeluxels == NULL )
 438                         lm->superDeluxels = safe_malloc( size );
 439                 memset( lm->superDeluxels, 0, size );
 440
 441                 /* allocate bsp deluxel storage */
 442                 size = lm->w * lm->h * BSP_DELUXEL_SIZE * sizeof( float );
 443                 if( lm->bspDeluxels == NULL )
 444                         lm->bspDeluxels = safe_malloc( size );
 445                 memset( lm->bspDeluxels, 0, size );
 446         }
 447
 448         /* add to count */
 449         numLuxels += (lm->sw * lm->sh);
 450 }
 451
 452
 453
 454 /*
 455 AddPatchToRawLightmap()
 456 projects a lightmap for a patch surface
 457 since lightmap calculation for surfaces is now handled in a general way (light_ydnar.c),
 458 it is no longer necessary for patch verts to fall exactly on a lightmap sample
 459 based on AllocateLightmapForPatch()
 460 */
 461
 462 qboolean AddPatchToRawLightmap( int num, rawLightmap_t *lm )
 463 {
 464         bspDrawSurface_t        *ds;
 465         surfaceInfo_t           *info;
 466         int                                     x, y;
 467         bspDrawVert_t           *verts, *a, *b;
 468         vec3_t                          delta;
 469         mesh_t                          src, *subdivided, *mesh;
 470         float                           sBasis, tBasis, s, t;
 471         float                           length, widthTable[ MAX_EXPANDED_AXIS ], heightTable[ MAX_EXPANDED_AXIS ];
 472
 473
 474         /* patches finish a raw lightmap */
 475         lm->finished = qtrue;
 476
 477         /* get surface and info  */
 478         ds = &bspDrawSurfaces[ num ];
 479         info = &surfaceInfos[ num ];
 480
 481         /* make a temporary mesh from the drawsurf */
 482         src.width = ds->patchWidth;
 483         src.height = ds->patchHeight;
 484         src.verts = &yDrawVerts[ ds->firstVert ];
 485         //%     subdivided = SubdivideMesh( src, 8, 512 );
 486         subdivided = SubdivideMesh2( src, info->patchIterations );
 487
 488         /* fit it to the curve and remove colinear verts on rows/columns */
 489         PutMeshOnCurve( *subdivided );
 490         mesh = RemoveLinearMeshColumnsRows( subdivided );
 491         FreeMesh( subdivided );
 492
 493         /* find the longest distance on each row/column */
 494         verts = mesh->verts;
 495         memset( widthTable, 0, sizeof( widthTable ) );
 496         memset( heightTable, 0, sizeof( heightTable ) );
 497         for( y = 0; y < mesh->height; y++ )
 498         {
 499                 for( x = 0; x < mesh->width; x++ )
 500                 {
 501                         /* get width */
 502                         if( x + 1 < mesh->width )
 503                         {
 504                                 a = &verts[ (y * mesh->width) + x ];
 505                                 b = &verts[ (y * mesh->width) + x + 1 ];
 506                                 VectorSubtract( a->xyz, b->xyz, delta );
 507                                 length = VectorLength( delta );
 508                                 if( length > widthTable[ x ] )
 509                                         widthTable[ x ] = length;
 510                         }
 511
 512                         /* get height */
 513                         if( y + 1 < mesh->height )
 514                         {
 515                                 a = &verts[ (y * mesh->width) + x ];
 516                                 b = &verts[ ((y + 1) * mesh->width) + x ];
 517                                 VectorSubtract( a->xyz, b->xyz, delta );
 518                                 length = VectorLength( delta );
 519                                 if( length > heightTable[ y ] )
 520                                         heightTable[ y ] = length;
 521                         }
 522                 }
 523         }
 524
 525         /* determine lightmap width */
 526         length = 0;
 527         for( x = 0; x < (mesh->width - 1); x++ )
 528                 length += widthTable[ x ];
 529         lm->w = ceil( length / lm->sampleSize ) + 1;
 530         if( lm->w < ds->patchWidth )
 531                 lm->w = ds->patchWidth;
 532         if( lm->w > lm->customWidth )
 533                 lm->w = lm->customWidth;
 534         sBasis = (float) (lm->w - 1) / (float) (ds->patchWidth - 1);
 535
 536         /* determine lightmap height */
 537         length = 0;
 538         for( y = 0; y < (mesh->height - 1); y++ )
 539                 length += heightTable[ y ];
 540         lm->h = ceil( length / lm->sampleSize ) + 1;
 541         if( lm->h < ds->patchHeight )
 542                 lm->h = ds->patchHeight;
 543         if( lm->h > lm->customHeight )
 544                 lm->h = lm->customHeight;
 545         tBasis = (float) (lm->h - 1) / (float) (ds->patchHeight - 1);
 546
 547         /* free the temporary mesh */
 548         FreeMesh( mesh );
 549
 550         /* set the lightmap texture coordinates in yDrawVerts */
 551         lm->wrap[ 0 ] = qtrue;
 552         lm->wrap[ 1 ] = qtrue;
 553         verts = &yDrawVerts[ ds->firstVert ];
 554         for( y = 0; y < ds->patchHeight; y++ )
 555         {
 556                 t = (tBasis * y) + 0.5f;
 557                 for( x = 0; x < ds->patchWidth; x++ )
 558                 {
 559                         s = (sBasis * x) + 0.5f;
 560                         verts[ (y * ds->patchWidth) + x ].lightmap[ 0 ][ 0 ] = s * superSample;
 561                         verts[ (y * ds->patchWidth) + x ].lightmap[ 0 ][ 1 ] = t * superSample;
 562
 563                         if( y == 0 && !VectorCompare( verts[ x ].xyz, verts[ ((ds->patchHeight - 1) * ds->patchWidth) + x ].xyz ) )
 564                                 lm->wrap[ 1 ] = qfalse;
 565                 }
 566
 567                 if( !VectorCompare( verts[ (y * ds->patchWidth) ].xyz, verts[ (y * ds->patchWidth) + (ds->patchWidth - 1) ].xyz ) )
 568                         lm->wrap[ 0 ] = qfalse;
 569         }
 570
 571         /* debug code: */
 572         //%     Sys_Printf( "wrap S: %d wrap T: %d\n", lm->wrap[ 0 ], lm->wrap[ 1 ] );
 573         //% if( lm->w > (ds->lightmapWidth & 0xFF) || lm->h > (ds->lightmapHeight & 0xFF) )
 574         //%             Sys_Printf( "Patch lightmap: (%3d %3d) > (%3d, %3d)\n", lm->w, lm->h, ds->lightmapWidth & 0xFF, ds->lightmapHeight & 0xFF );
 575         //% ds->lightmapWidth = lm->w | (ds->lightmapWidth & 0xFFFF0000);
 576         //% ds->lightmapHeight = lm->h | (ds->lightmapHeight & 0xFFFF0000);
 577
 578         /* add to counts */
 579         numPatchesLightmapped++;
 580
 581         /* return */
 582         return qtrue;
 583 }
 584
 585
 586
 587 /*
 588 AddSurfaceToRawLightmap()
 589 projects a lightmap for a surface
 590 based on AllocateLightmapForSurface()
 591 */
 592
 593 qboolean AddSurfaceToRawLightmap( int num, rawLightmap_t *lm )
 594 {
 595         bspDrawSurface_t        *ds, *ds2;
 596         surfaceInfo_t           *info, *info2;
 597         int                                     num2, n, i, axisNum;
 598         float                           s, t, d, len, sampleSize;
 599         vec3_t                          mins, maxs, origin, faxis, size, exactSize, delta, normalized, vecs[ 2 ];
 600         vec4_t                          plane;
 601         bspDrawVert_t           *verts;
 602
 603
 604         /* get surface and info  */
 605         ds = &bspDrawSurfaces[ num ];
 606         info = &surfaceInfos[ num ];
 607
 608         /* add the surface to the raw lightmap */
 609         lightSurfaces[ numLightSurfaces++ ] = num;
 610         lm->numLightSurfaces++;
 611
 612         /* does this raw lightmap already have any surfaces? */
 613         if( lm->numLightSurfaces > 1 )
 614         {
 615                 /* surface and raw lightmap must have the same lightmap projection axis */
 616                 if( VectorCompare( info->axis, lm->axis ) == qfalse )
 617                         return qfalse;
 618
 619                 /* match identical attributes */
 620                 if( info->sampleSize != lm->sampleSize ||
 621                         info->entityNum != lm->entityNum ||
 622                         info->recvShadows != lm->recvShadows ||
 623                         info->si->lmCustomWidth != lm->customWidth ||
 624                         info->si->lmCustomHeight != lm->customHeight ||
 625                         info->si->lmBrightness != lm->brightness ||
 626                         info->si->lmFilterRadius != lm->filterRadius ||
 627                         info->si->splotchFix != lm->splotchFix )
 628                         return qfalse;
 629
 630                 /* surface bounds must intersect with raw lightmap bounds */
 631                 for( i = 0; i < 3; i++ )
 632                 {
 633                         if( info->mins[ i ] > lm->maxs[ i ] )
 634                                 return qfalse;
 635                         if( info->maxs[ i ] < lm->mins[ i ] )
 636                                 return qfalse;
 637                 }
 638
 639                 /* plane check (fixme: allow merging of nonplanars) */
 640                 if( info->si->lmMergable == qfalse )
 641                 {
 642                         if( info->plane == NULL || lm->plane == NULL )
 643                                 return qfalse;
 644
 645                         /* compare planes */
 646                         for( i = 0; i < 4; i++ )
 647                                 if( fabs( info->plane[ i ] - lm->plane[ i ] ) > EQUAL_EPSILON )
 648                                         return qfalse;
 649                 }
 650
 651                 /* debug code hacking */
 652                 //%     if( lm->numLightSurfaces > 1 )
 653                 //%             return qfalse;
 654         }
 655
 656         /* set plane */
 657         if( info->plane == NULL )
 658                 lm->plane = NULL;
 659
 660         /* add surface to lightmap bounds */
 661         AddPointToBounds( info->mins, lm->mins, lm->maxs );
 662         AddPointToBounds( info->maxs, lm->mins, lm->maxs );
 663
 664         /* check to see if this is a non-planar patch */
 665         if( ds->surfaceType == MST_PATCH &&
 666                 lm->axis[ 0 ] == 0.0f && lm->axis[ 1 ] == 0.0f && lm->axis[ 2 ] == 0.0f )
 667                 return AddPatchToRawLightmap( num, lm );
 668
 669         /* start with initially requested sample size */
 670         sampleSize = lm->sampleSize;
 671
 672         /* round to the lightmap resolution */
 673         for( i = 0; i < 3; i++ )
 674         {
 675                 exactSize[ i ] = lm->maxs[ i ] - lm->mins[ i ];
 676                 mins[ i ] = sampleSize * floor( lm->mins[ i ] / sampleSize );
 677                 maxs[ i ] = sampleSize * ceil( lm->maxs[ i ] / sampleSize );
 678                 size[ i ] = (maxs[ i ] - mins[ i ]) / sampleSize + 1.0f;
 679
 680                 /* hack (god this sucks) */
 681                 if( size[ i ] > lm->customWidth || size[ i ] > lm->customHeight )
 682                 {
 683                         i = -1;
 684                         sampleSize += 1.0f;
 685                 }
 686         }
 687
 688         if(sampleSize != lm->sampleSize)
 689         {
 690                 Sys_FPrintf(SYS_VRB,"WARNING: surface at (%6.0f %6.0f %6.0f) (%6.0f %6.0f %6.0f) too large for desired samplesize/lightmapsize/lightmapscale combination, increased samplesize from %d to %d\n",
 691                         info->mins[0],
 692                         info->mins[1],
 693                         info->mins[2],
 694                         info->maxs[0],
 695                         info->maxs[1],
 696                         info->maxs[2],
 697                         lm->sampleSize,
 698                         (int) sampleSize);
 699         }
 700
 701         /* set actual sample size */
 702         lm->actualSampleSize = sampleSize;
 703
 704         /* fixme: copy rounded mins/maxes to lightmap record? */
 705         if( lm->plane == NULL )
 706         {
 707                 VectorCopy( mins, lm->mins );
 708                 VectorCopy( maxs, lm->maxs );
 709                 VectorCopy( mins, origin );
 710         }
 711
 712         /* set lightmap origin */
 713         VectorCopy( lm->mins, origin );
 714
 715         /* make absolute axis */
 716         faxis[ 0 ] = fabs( lm->axis[ 0 ] );
 717         faxis[ 1 ] = fabs( lm->axis[ 1 ] );
 718         faxis[ 2 ] = fabs( lm->axis[ 2 ] );
 719
 720         /* clear out lightmap vectors */
 721         memset( vecs, 0, sizeof( vecs ) );
 722
 723         /* classify the plane (x y or z major) (ydnar: biased to z axis projection) */
 724         if( faxis[ 2 ] >= faxis[ 0 ] && faxis[ 2 ] >= faxis[ 1 ] )
 725         {
 726                 axisNum = 2;
 727                 lm->w = size[ 0 ];
 728                 lm->h = size[ 1 ];
 729                 vecs[ 0 ][ 0 ] = 1.0f / sampleSize;
 730                 vecs[ 1 ][ 1 ] = 1.0f / sampleSize;
 731         }
 732         else if( faxis[ 0 ] >= faxis[ 1 ] && faxis[ 0 ] >= faxis[ 2 ] )
 733         {
 734                 axisNum = 0;
 735                 lm->w = size[ 1 ];
 736                 lm->h = size[ 2 ];
 737                 vecs[ 0 ][ 1 ] = 1.0f / sampleSize;
 738                 vecs[ 1 ][ 2 ] = 1.0f / sampleSize;
 739         }
 740         else
 741         {
 742                 axisNum = 1;
 743                 lm->w = size[ 0 ];
 744                 lm->h = size[ 2 ];
 745                 vecs[ 0 ][ 0 ] = 1.0f / sampleSize;
 746                 vecs[ 1 ][ 2 ] = 1.0f / sampleSize;
 747         }
 748
 749         /* check for bogus axis */
 750         if( faxis[ axisNum ] == 0.0f )
 751         {
 752                 Sys_Printf( "WARNING: ProjectSurfaceLightmap: Chose a 0 valued axis\n" );
 753                 lm->w = lm->h = 0;
 754                 return qfalse;
 755         }
 756
 757         /* store the axis number in the lightmap */
 758         lm->axisNum = axisNum;
 759
 760         /* walk the list of surfaces on this raw lightmap */
 761         for( n = 0; n < lm->numLightSurfaces; n++ )
 762         {
 763                 /* get surface */
 764                 num2 = lightSurfaces[ lm->firstLightSurface + n ];
 765                 ds2 = &bspDrawSurfaces[ num2 ];
 766                 info2 = &surfaceInfos[ num2 ];
 767                 verts = &yDrawVerts[ ds2->firstVert ];
 768
 769                 /* set the lightmap texture coordinates in yDrawVerts in [0, superSample * lm->customWidth] space */
 770                 for( i = 0; i < ds2->numVerts; i++ )
 771                 {
 772                         VectorSubtract( verts[ i ].xyz, origin, delta );
 773                         s = DotProduct( delta, vecs[ 0 ] ) + 0.5f;
 774                         t = DotProduct( delta, vecs[ 1 ] ) + 0.5f;
 775                         verts[ i ].lightmap[ 0 ][ 0 ] = s * superSample;
 776                         verts[ i ].lightmap[ 0 ][ 1 ] = t * superSample;
 777
 778                         if( s > (float) lm->w || t > (float) lm->h )
 779                         {
 780                                 Sys_FPrintf( SYS_VRB, "WARNING: Lightmap texture coords out of range: S %1.4f > %3d || T %1.4f > %3d\n",
 781                                         s, lm->w, t, lm->h );
 782                         }
 783                 }
 784         }
 785
 786         /* get first drawsurface */
 787         num2 = lightSurfaces[ lm->firstLightSurface ];
 788         ds2 = &bspDrawSurfaces[ num2 ];
 789         info2 = &surfaceInfos[ num2 ];
 790         verts = &yDrawVerts[ ds2->firstVert ];
 791
 792         /* calculate lightmap origin */
 793         if( VectorLength( ds2->lightmapVecs[ 2 ] ) )
 794                 VectorCopy( ds2->lightmapVecs[ 2 ], plane );
 795         else
 796                 VectorCopy( lm->axis, plane );
 797         plane[ 3 ] = DotProduct( verts[ 0 ].xyz, plane );
 798
 799         VectorCopy( origin, lm->origin );
 800         d = DotProduct( lm->origin, plane ) - plane[ 3 ];
 801         d /= plane[ axisNum ];
 802         lm->origin[ axisNum ] -= d;
 803
 804         /* legacy support */
 805         VectorCopy( lm->origin, ds->lightmapOrigin );
 806
 807         /* for planar surfaces, create lightmap vectors for st->xyz conversion */
 808         if( VectorLength( ds->lightmapVecs[ 2 ] ) || 1 )        /* ydnar: can't remember what exactly i was thinking here... */
 809         {
 810                 /* allocate space for the vectors */
 811                 lm->vecs = safe_malloc( 3 * sizeof( vec3_t ) );
 812                 memset( lm->vecs, 0, 3 * sizeof( vec3_t ) );
 813                 VectorCopy( ds->lightmapVecs[ 2 ], lm->vecs[ 2 ] );
 814
 815                 /* project stepped lightmap blocks and subtract to get planevecs */
 816                 for( i = 0; i < 2; i++ )
 817                 {
 818                         len = VectorNormalize( vecs[ i ], normalized );
 819                         VectorScale( normalized, (1.0 / len), lm->vecs[ i ] );
 820                         d = DotProduct( lm->vecs[ i ], plane );
 821                         d /= plane[ axisNum ];
 822                         lm->vecs[ i ][ axisNum ] -= d;
 823                 }
 824         }
 825         else
 826         {
 827                 /* lightmap vectors are useless on a non-planar surface */
 828                 lm->vecs = NULL;
 829         }
 830
 831         /* add to counts */
 832         if( ds->surfaceType == MST_PATCH )
 833         {
 834                 numPatchesLightmapped++;
 835                 if( lm->plane != NULL )
 836                         numPlanarPatchesLightmapped++;
 837         }
 838         else
 839         {
 840                 if( lm->plane != NULL )
 841                         numPlanarsLightmapped++;
 842                 else
 843                         numNonPlanarsLightmapped++;
 844         }
 845
 846         /* return */
 847         return qtrue;
 848 }
 849
 850
 851
 852 /*
 853 CompareSurfaceInfo()
 854 compare function for qsort()
 855 */
 856
 857 static int CompareSurfaceInfo( const void *a, const void *b )
 858 {
 859         surfaceInfo_t   *aInfo, *bInfo;
 860         int                             i;
 861
 862
 863         /* get surface info */
 864         aInfo = &surfaceInfos[ *((int*) a) ];
 865         bInfo = &surfaceInfos[ *((int*) b) ];
 866
 867         /* model first */
 868         if( aInfo->model < bInfo->model )
 869                 return 1;
 870         else if( aInfo->model > bInfo->model )
 871                 return -1;
 872
 873         /* then lightmap status */
 874         if( aInfo->hasLightmap < bInfo->hasLightmap )
 875                 return 1;
 876         else if( aInfo->hasLightmap > bInfo->hasLightmap )
 877                 return -1;
 878
 879         /* then lightmap sample size */
 880         if( aInfo->sampleSize < bInfo->sampleSize )
 881                 return 1;
 882         else if( aInfo->sampleSize > bInfo->sampleSize )
 883                 return -1;
 884
 885         /* then lightmap axis */
 886         for( i = 0; i < 3; i++ )
 887         {
 888                 if( aInfo->axis[ i ] < bInfo->axis[ i ] )
 889                         return 1;
 890                 else if( aInfo->axis[ i ] > bInfo->axis[ i ] )
 891                         return -1;
 892         }
 893
 894         /* then plane */
 895         if( aInfo->plane == NULL && bInfo->plane != NULL )
 896                 return 1;
 897         else if( aInfo->plane != NULL && bInfo->plane == NULL )
 898                 return -1;
 899         else if( aInfo->plane != NULL && bInfo->plane != NULL )
 900         {
 901                 for( i = 0; i < 4; i++ )
 902                 {
 903                         if( aInfo->plane[ i ] < bInfo->plane[ i ] )
 904                                 return 1;
 905                         else if( aInfo->plane[ i ] > bInfo->plane[ i ] )
 906                                 return -1;
 907                 }
 908         }
 909
 910         /* then position in world */
 911         for( i = 0; i < 3; i++ )
 912         {
 913                 if( aInfo->mins[ i ] < bInfo->mins[ i ] )
 914                         return 1;
 915                 else if( aInfo->mins[ i ] > bInfo->mins[ i ] )
 916                         return -1;
 917         }
 918
 919         /* these are functionally identical (this should almost never happen) */
 920         return 0;
 921 }
 922
 923
 924
 925 /*
 926 SetupSurfaceLightmaps()
 927 allocates lightmaps for every surface in the bsp that needs one
 928 this depends on yDrawVerts being allocated
 929 */
 930
 931 void SetupSurfaceLightmaps( void )
 932 {
 933         int                                     i, j, k, s,num, num2;
 934         bspModel_t                      *model;
 935         bspLeaf_t                       *leaf;
 936         bspDrawSurface_t        *ds, *ds2;
 937         surfaceInfo_t           *info, *info2;
 938         rawLightmap_t           *lm;
 939         qboolean                        added;
 940         vec3_t                          mapSize, entityOrigin;
 941
 942
 943         /* note it */
 944         Sys_FPrintf( SYS_VRB, "--- SetupSurfaceLightmaps ---\n");
 945
 946         /* determine supersample amount */
 947         if( superSample < 1 )
 948                 superSample = 1;
 949         else if( superSample > 8 )
 950         {
 951                 Sys_Printf( "WARNING: Insane supersampling amount (%d) detected.\n", superSample );
 952                 superSample = 8;
 953         }
 954
 955         /* clear map bounds */
 956         ClearBounds( mapMins, mapMaxs );
 957
 958         /* allocate a list of surface clusters */
 959         numSurfaceClusters = 0;
 960         maxSurfaceClusters = numBSPLeafSurfaces;
 961         surfaceClusters = safe_malloc( maxSurfaceClusters * sizeof( *surfaceClusters ) );
 962         memset( surfaceClusters, 0, maxSurfaceClusters * sizeof( *surfaceClusters ) );
 963
 964         /* allocate a list for per-surface info */
 965         surfaceInfos = safe_malloc( numBSPDrawSurfaces * sizeof( *surfaceInfos ) );
 966         memset( surfaceInfos, 0, numBSPDrawSurfaces * sizeof( *surfaceInfos ) );
 967         for( i = 0; i < numBSPDrawSurfaces; i++ )
 968                 surfaceInfos[ i ].childSurfaceNum = -1;
 969
 970         /* allocate a list of surface indexes to be sorted */
 971         sortSurfaces = safe_malloc( numBSPDrawSurfaces * sizeof( int ) );
 972         memset( sortSurfaces, 0, numBSPDrawSurfaces * sizeof( int ) );
 973
 974         /* walk each model in the bsp */
 975         for( i = 0; i < numBSPModels; i++ )
 976         {
 977                 /* get model */
 978                 model = &bspModels[ i ];
 979
 980                 /* walk the list of surfaces in this model and fill out the info structs */
 981                 for( j = 0; j < model->numBSPSurfaces; j++ )
 982                 {
 983                         /* make surface index */
 984                         num = model->firstBSPSurface + j;
 985
 986                         /* copy index to sort list */
 987                         sortSurfaces[ num ] = num;
 988
 989                         /* get surface and info */
 990                         ds = &bspDrawSurfaces[ num ];
 991                         info = &surfaceInfos[ num ];
 992
 993                         /* set entity origin */
 994                         if( ds->numVerts > 0 )
 995                                 VectorSubtract( yDrawVerts[ ds->firstVert ].xyz, bspDrawVerts[ ds->firstVert ].xyz, entityOrigin );
 996                         else
 997                                 VectorClear( entityOrigin );
 998
 999                         /* basic setup */
1000                         info->model = model;
1001                         info->lm = NULL;
1002                         info->plane = NULL;
1003                         info->firstSurfaceCluster = numSurfaceClusters;
1004
1005                         /* get extra data */
1006                         info->si = GetSurfaceExtraShaderInfo( num );
1007                         if( info->si == NULL )
1008                                 info->si = ShaderInfoForShader( bspShaders[ ds->shaderNum ].shader );
1009                         info->parentSurfaceNum = GetSurfaceExtraParentSurfaceNum( num );
1010                         info->entityNum = GetSurfaceExtraEntityNum( num );
1011                         info->castShadows = GetSurfaceExtraCastShadows( num );
1012                         info->recvShadows = GetSurfaceExtraRecvShadows( num );
1013                         info->sampleSize = GetSurfaceExtraSampleSize( num );
1014                         info->longestCurve = GetSurfaceExtraLongestCurve( num );
1015                         info->patchIterations = IterationsForCurve( info->longestCurve, patchSubdivisions );
1016                         GetSurfaceExtraLightmapAxis( num, info->axis );
1017
1018                         /* mark parent */
1019                         if( info->parentSurfaceNum >= 0 )
1020                                 surfaceInfos[ info->parentSurfaceNum ].childSurfaceNum = j;
1021
1022                         /* determine surface bounds */
1023                         ClearBounds( info->mins, info->maxs );
1024                         for( k = 0; k < ds->numVerts; k++ )
1025                         {
1026                                 AddPointToBounds( yDrawVerts[ ds->firstVert + k ].xyz, mapMins, mapMaxs );
1027                                 AddPointToBounds( yDrawVerts[ ds->firstVert + k ].xyz, info->mins, info->maxs );
1028                         }
1029
1030                         /* find all the bsp clusters the surface falls into */
1031                         for( k = 0; k < numBSPLeafs; k++ )
1032                         {
1033                                 /* get leaf */
1034                                 leaf = &bspLeafs[ k ];
1035
1036                                 /* test bbox */
1037                                 if( leaf->mins[ 0 ] > info->maxs[ 0 ] || leaf->maxs[ 0 ] < info->mins[ 0 ] ||
1038                                         leaf->mins[ 1 ] > info->maxs[ 1 ] || leaf->maxs[ 1 ] < info->mins[ 1 ] ||
1039                                         leaf->mins[ 2 ] > info->maxs[ 2 ] || leaf->maxs[ 2 ] < info->mins[ 2 ] )
1040                                         continue;
1041
1042                                 /* test leaf surfaces */
1043                                 for( s = 0; s < leaf->numBSPLeafSurfaces; s++ )
1044                                 {
1045                                         if( bspLeafSurfaces[ leaf->firstBSPLeafSurface + s ] == num )
1046                                         {
1047                                                 if( numSurfaceClusters >= maxSurfaceClusters )
1048                                                         Error( "maxSurfaceClusters exceeded" );
1049                                                 surfaceClusters[ numSurfaceClusters ] = leaf->cluster;
1050                                                 numSurfaceClusters++;
1051                                                 info->numSurfaceClusters++;
1052                                         }
1053                                 }
1054                         }
1055
1056                         /* determine if surface is planar */
1057                         if( VectorLength( ds->lightmapVecs[ 2 ] ) > 0.0f )
1058                         {
1059                                 /* make a plane */
1060                                 info->plane = safe_malloc( 4 * sizeof( float ) );
1061                                 VectorCopy( ds->lightmapVecs[ 2 ], info->plane );
1062                                 info->plane[ 3 ] = DotProduct( yDrawVerts[ ds->firstVert ].xyz, info->plane );
1063                         }
1064
1065                         /* determine if surface requires a lightmap */
1066                         if( ds->surfaceType == MST_TRIANGLE_SOUP ||
1067                                 ds->surfaceType == MST_FOLIAGE ||
1068                                 (info->si->compileFlags & C_VERTEXLIT) )
1069                                 numSurfsVertexLit++;
1070                         else
1071                         {
1072                                 numSurfsLightmapped++;
1073                                 info->hasLightmap = qtrue;
1074                         }
1075                 }
1076         }
1077
1078         /* find longest map distance */
1079         VectorSubtract( mapMaxs, mapMins, mapSize );
1080         maxMapDistance = VectorLength( mapSize );
1081
1082         /* sort the surfaces info list */
1083         qsort( sortSurfaces, numBSPDrawSurfaces, sizeof( int ), CompareSurfaceInfo );
1084
1085         /* allocate a list of surfaces that would go into raw lightmaps */
1086         numLightSurfaces = 0;
1087         lightSurfaces = safe_malloc( numSurfsLightmapped * sizeof( int ) );
1088         memset( lightSurfaces, 0, numSurfsLightmapped * sizeof( int ) );
1089
1090         /* allocate a list of raw lightmaps */
1091         numRawSuperLuxels = 0;
1092         numRawLightmaps = 0;
1093         rawLightmaps = safe_malloc( numSurfsLightmapped * sizeof( *rawLightmaps ) );
1094         memset( rawLightmaps, 0, numSurfsLightmapped * sizeof( *rawLightmaps ) );
1095
1096         /* walk the list of sorted surfaces */
1097         for( i = 0; i < numBSPDrawSurfaces; i++ )
1098         {
1099                 /* get info and attempt early out */
1100                 num = sortSurfaces[ i ];
1101                 ds = &bspDrawSurfaces[ num ];
1102                 info = &surfaceInfos[ num ];
1103                 if( info->hasLightmap == qfalse || info->lm != NULL || info->parentSurfaceNum >= 0 )
1104                         continue;
1105
1106                 /* allocate a new raw lightmap */
1107                 lm = &rawLightmaps[ numRawLightmaps ];
1108                 numRawLightmaps++;
1109
1110                 /* set it up */
1111                 lm->splotchFix = info->si->splotchFix;
1112                 lm->firstLightSurface = numLightSurfaces;
1113                 lm->numLightSurfaces = 0;
1114                 lm->sampleSize = info->sampleSize;
1115                 lm->actualSampleSize = info->sampleSize;
1116                 lm->entityNum = info->entityNum;
1117                 lm->recvShadows = info->recvShadows;
1118                 lm->brightness = info->si->lmBrightness;
1119                 lm->filterRadius = info->si->lmFilterRadius;
1120                 VectorCopy( info->axis, lm->axis );
1121                 lm->plane = info->plane;
1122                 VectorCopy( info->mins, lm->mins );
1123                 VectorCopy( info->maxs, lm->maxs );
1124
1125                 lm->customWidth = info->si->lmCustomWidth;
1126                 lm->customHeight = info->si->lmCustomHeight;
1127
1128                 /* add the surface to the raw lightmap */
1129                 AddSurfaceToRawLightmap( num, lm );
1130                 info->lm = lm;
1131
1132                 /* do an exhaustive merge */
1133                 added = qtrue;
1134                 while( added )
1135                 {
1136                         /* walk the list of surfaces again */
1137                         added = qfalse;
1138                         for( j = i + 1; j < numBSPDrawSurfaces && lm->finished == qfalse; j++ )
1139                         {
1140                                 /* get info and attempt early out */
1141                                 num2 = sortSurfaces[ j ];
1142                                 ds2 = &bspDrawSurfaces[ num2 ];
1143                                 info2 = &surfaceInfos[ num2 ];
1144                                 if( info2->hasLightmap == qfalse || info2->lm != NULL )
1145                                         continue;
1146
1147                                 /* add the surface to the raw lightmap */
1148                                 if( AddSurfaceToRawLightmap( num2, lm ) )
1149                                 {
1150                                         info2->lm = lm;
1151                                         added = qtrue;
1152                                 }
1153                                 else
1154                                 {
1155                                         /* back up one */
1156                                         lm->numLightSurfaces--;
1157                                         numLightSurfaces--;
1158                                 }
1159                         }
1160                 }
1161
1162                 /* finish the lightmap and allocate the various buffers */
1163                 FinishRawLightmap( lm );
1164         }
1165
1166         /* allocate vertex luxel storage */
1167         for( k = 0; k < MAX_LIGHTMAPS; k++ )
1168         {
1169                 vertexLuxels[ k ] = safe_malloc( numBSPDrawVerts * VERTEX_LUXEL_SIZE * sizeof( float ) );
1170                 memset( vertexLuxels[ k ], 0, numBSPDrawVerts * VERTEX_LUXEL_SIZE * sizeof( float ) );
1171                 radVertexLuxels[ k ] = safe_malloc( numBSPDrawVerts * VERTEX_LUXEL_SIZE * sizeof( float ) );
1172                 memset( radVertexLuxels[ k ], 0, numBSPDrawVerts * VERTEX_LUXEL_SIZE * sizeof( float ) );
1173         }
1174
1175         /* emit some stats */
1176         Sys_FPrintf( SYS_VRB, "%9d surfaces\n", numBSPDrawSurfaces );
1177         Sys_FPrintf( SYS_VRB, "%9d raw lightmaps\n", numRawLightmaps );
1178         Sys_FPrintf( SYS_VRB, "%9d surfaces vertex lit\n", numSurfsVertexLit );
1179         Sys_FPrintf( SYS_VRB, "%9d surfaces lightmapped\n", numSurfsLightmapped );
1180         Sys_FPrintf( SYS_VRB, "%9d planar surfaces lightmapped\n", numPlanarsLightmapped );
1181         Sys_FPrintf( SYS_VRB, "%9d non-planar surfaces lightmapped\n", numNonPlanarsLightmapped );
1182         Sys_FPrintf( SYS_VRB, "%9d patches lightmapped\n", numPatchesLightmapped );
1183         Sys_FPrintf( SYS_VRB, "%9d planar patches lightmapped\n", numPlanarPatchesLightmapped );
1184 }
1185
1186
1187
1188 /*
1189 StitchSurfaceLightmaps()
1190 stitches lightmap edges
1191 2002-11-20 update: use this func only for stitching nonplanar patch lightmap seams
1192 */
1193
1194 #define MAX_STITCH_CANDIDATES   32
1195 #define MAX_STITCH_LUXELS               64
1196
1197 void StitchSurfaceLightmaps( void )
1198 {
1199         int                             i, j, x, y, x2, y2, *cluster, *cluster2,
1200                                         numStitched, numCandidates, numLuxels, f, fOld, start;
1201         rawLightmap_t   *lm, *a, *b, *c[ MAX_STITCH_CANDIDATES ];
1202         float                   *luxel, *luxel2, *origin, *origin2, *normal, *normal2,
1203                                         sampleSize, average[ 3 ], totalColor, ootc, *luxels[ MAX_STITCH_LUXELS ];
1204
1205
1206         /* disabled for now */
1207         return;
1208
1209         /* note it */
1210         Sys_Printf( "--- StitchSurfaceLightmaps ---\n");
1211
1212         /* init pacifier */
1213         fOld = -1;
1214         start = I_FloatTime();
1215
1216         /* walk the list of raw lightmaps */
1217         numStitched = 0;
1218         for( i = 0; i < numRawLightmaps; i++ )
1219         {
1220                 /* print pacifier */
1221                 f = 10 * i / numRawLightmaps;
1222                 if( f != fOld )
1223                 {
1224                         fOld = f;
1225                         Sys_Printf( "%i...", f );
1226                 }
1227
1228                 /* get lightmap a */
1229                 a = &rawLightmaps[ i ];
1230
1231                 /* walk rest of lightmaps */
1232                 numCandidates = 0;
1233                 for( j = i + 1; j < numRawLightmaps && numCandidates < MAX_STITCH_CANDIDATES; j++ )
1234                 {
1235                         /* get lightmap b */
1236                         b = &rawLightmaps[ j ];
1237
1238                         /* test bounding box */
1239                         if( a->mins[ 0 ] > b->maxs[ 0 ] || a->maxs[ 0 ] < b->mins[ 0 ] ||
1240                                 a->mins[ 1 ] > b->maxs[ 1 ] || a->maxs[ 1 ] < b->mins[ 1 ] ||
1241                                 a->mins[ 2 ] > b->maxs[ 2 ] || a->maxs[ 2 ] < b->mins[ 2 ] )
1242                                 continue;
1243
1244                         /* add candidate */
1245                         c[ numCandidates++ ] = b;
1246                 }
1247
1248                 /* walk luxels */
1249                 for( y = 0; y < a->sh; y++ )
1250                 {
1251                         for( x = 0; x < a->sw; x++ )
1252                         {
1253                                 /* ignore unmapped/unlit luxels */
1254                                 lm = a;
1255                                 cluster = SUPER_CLUSTER( x, y );
1256                                 if( *cluster == CLUSTER_UNMAPPED )
1257                                         continue;
1258                                 luxel = SUPER_LUXEL( 0, x, y );
1259                                 if( luxel[ 3 ] <= 0.0f )
1260                                         continue;
1261
1262                                 /* get particulars */
1263                                 origin = SUPER_ORIGIN( x, y );
1264                                 normal = SUPER_NORMAL( x, y );
1265
1266                                 /* walk candidate list */
1267                                 for( j = 0; j < numCandidates; j++ )
1268                                 {
1269                                         /* get candidate */
1270                                         b = c[ j ];
1271                                         lm = b;
1272
1273                                         /* set samplesize to the smaller of the pair */
1274                                         sampleSize = 0.5f * (a->actualSampleSize < b->actualSampleSize ? a->actualSampleSize : b->actualSampleSize);
1275
1276                                         /* test bounding box */
1277                                         if( origin[ 0 ] < (b->mins[ 0 ] - sampleSize) || (origin[ 0 ] > b->maxs[ 0 ] + sampleSize) ||
1278                                                 origin[ 1 ] < (b->mins[ 1 ] - sampleSize) || (origin[ 1 ] > b->maxs[ 1 ] + sampleSize) ||
1279                                                 origin[ 2 ] < (b->mins[ 2 ] - sampleSize) || (origin[ 2 ] > b->maxs[ 2 ] + sampleSize) )
1280                                                 continue;
1281
1282                                         /* walk candidate luxels */
1283                                         VectorClear( average );
1284                                         numLuxels = 0;
1285                                         totalColor = 0.0f;
1286                                         for( y2 = 0; y2 < b->sh && numLuxels < MAX_STITCH_LUXELS; y2++ )
1287                                         {
1288                                                 for( x2 = 0; x2 < b->sw && numLuxels < MAX_STITCH_LUXELS; x2++ )
1289                                                 {
1290                                                         /* ignore same luxels */
1291                                                         if( a == b && abs( x - x2 ) <= 1 && abs( y - y2 ) <= 1 )
1292                                                                 continue;
1293
1294                                                         /* ignore unmapped/unlit luxels */
1295                                                         cluster2 = SUPER_CLUSTER( x2, y2 );
1296                                                         if( *cluster2 == CLUSTER_UNMAPPED )
1297                                                                 continue;
1298                                                         luxel2 = SUPER_LUXEL( 0, x2, y2 );
1299                                                         if( luxel2[ 3 ] <= 0.0f )
1300                                                                 continue;
1301
1302                                                         /* get particulars */
1303                                                         origin2 = SUPER_ORIGIN( x2, y2 );
1304                                                         normal2 = SUPER_NORMAL( x2, y2 );
1305
1306                                                         /* test normal */
1307                                                         if( DotProduct( normal, normal2 ) < 0.5f )
1308                                                                 continue;
1309
1310                                                         /* test bounds */
1311                                                         if( fabs( origin[ 0 ] - origin2[ 0 ] ) > sampleSize ||
1312                                                                 fabs( origin[ 1 ] - origin2[ 1 ] ) > sampleSize ||
1313                                                                 fabs( origin[ 2 ] - origin2[ 2 ] ) > sampleSize )
1314                                                                 continue;
1315
1316                                                         /* add luxel */
1317                                                         //%     VectorSet( luxel2, 255, 0, 255 );
1318                                                         luxels[ numLuxels++ ] = luxel2;
1319                                                         VectorAdd( average, luxel2, average );
1320                                                         totalColor += luxel2[ 3 ];
1321                                                 }
1322                                         }
1323
1324                                         /* early out */
1325                                         if( numLuxels == 0 )
1326                                                 continue;
1327
1328                                         /* scale average */
1329                                         ootc = 1.0f / totalColor;
1330                                         VectorScale( average, ootc, luxel );
1331                                         luxel[ 3 ] = 1.0f;
1332                                         numStitched++;
1333                                 }
1334                         }
1335                 }
1336         }
1337
1338         /* emit statistics */
1339         Sys_Printf( " (%i)\n", (int) (I_FloatTime() - start) );
1340         Sys_FPrintf( SYS_VRB, "%9d luxels stitched\n", numStitched );
1341 }
1342
1343
1344
1345 /*
1346 CompareBSPLuxels()
1347 compares two surface lightmaps' bsp luxels, ignoring occluded luxels
1348 */
1349
1350 #define SOLID_EPSILON           0.0625
1351 #define LUXEL_TOLERANCE         0.0025
1352 #define LUXEL_COLOR_FRAC        0.001302083     /* 1 / 3 / 256 */
1353
1354 static qboolean CompareBSPLuxels( rawLightmap_t *a, int aNum, rawLightmap_t *b, int bNum )
1355 {
1356         rawLightmap_t   *lm;
1357         int                             x, y;
1358         double                  delta, total, rd, gd, bd;
1359         float                   *aLuxel, *bLuxel;
1360
1361
1362         /* styled lightmaps will never be collapsed to non-styled lightmaps when there is _minlight */
1363         if( (minLight[ 0 ] || minLight[ 1 ] || minLight[ 2 ]) &&
1364                 ((aNum == 0 && bNum != 0) || (aNum != 0 && bNum == 0)) )
1365                 return qfalse;
1366
1367         /* basic tests */
1368         if( a->customWidth != b->customWidth || a->customHeight != b->customHeight ||
1369                 a->brightness != b->brightness ||
1370                 a->solid[ aNum ] != b->solid[ bNum ] ||
1371                 a->bspLuxels[ aNum ] == NULL || b->bspLuxels[ bNum ] == NULL )
1372                 return qfalse;
1373
1374         /* compare solid color lightmaps */
1375         if( a->solid[ aNum ] && b->solid[ bNum ] )
1376         {
1377                 /* get deltas */
1378                 rd = fabs( a->solidColor[ aNum ][ 0 ] - b->solidColor[ bNum ][ 0 ] );
1379                 gd = fabs( a->solidColor[ aNum ][ 1 ] - b->solidColor[ bNum ][ 1 ] );
1380                 bd = fabs( a->solidColor[ aNum ][ 2 ] - b->solidColor[ bNum ][ 2 ] );
1381
1382                 /* compare color */
1383                 if( rd > SOLID_EPSILON || gd > SOLID_EPSILON|| bd > SOLID_EPSILON )
1384                         return qfalse;
1385
1386                 /* okay */
1387                 return qtrue;
1388         }
1389
1390         /* compare nonsolid lightmaps */
1391         if( a->w != b->w || a->h != b->h )
1392                 return qfalse;
1393
1394         /* compare luxels */
1395         delta = 0.0;
1396         total = 0.0;
1397         for( y = 0; y < a->h; y++ )
1398         {
1399                 for( x = 0; x < a->w; x++ )
1400                 {
1401                         /* increment total */
1402                         total += 1.0;
1403
1404                         /* get luxels */
1405                         lm = a; aLuxel = BSP_LUXEL( aNum, x, y );
1406                         lm = b; bLuxel = BSP_LUXEL( bNum, x, y );
1407
1408                         /* ignore unused luxels */
1409                         if( aLuxel[ 0 ] < 0 || bLuxel[ 0 ] < 0 )
1410                                 continue;
1411
1412                         /* get deltas */
1413                         rd = fabs( aLuxel[ 0 ] - bLuxel[ 0 ] );
1414                         gd = fabs( aLuxel[ 1 ] - bLuxel[ 1 ] );
1415                         bd = fabs( aLuxel[ 2 ] - bLuxel[ 2 ] );
1416
1417                         /* 2003-09-27: compare individual luxels */
1418                         if( rd > 3.0 || gd > 3.0 || bd > 3.0 )
1419                                 return qfalse;
1420
1421                         /* compare (fixme: take into account perceptual differences) */
1422                         delta += rd * LUXEL_COLOR_FRAC;
1423                         delta += gd * LUXEL_COLOR_FRAC;
1424                         delta += bd * LUXEL_COLOR_FRAC;
1425
1426                         /* is the change too high? */
1427                         if( total > 0.0 && ((delta / total) > LUXEL_TOLERANCE) )
1428                                 return qfalse;
1429                 }
1430         }
1431
1432         /* made it this far, they must be identical (or close enough) */
1433         return qtrue;
1434 }
1435
1436
1437
1438 /*
1439 MergeBSPLuxels()
1440 merges two surface lightmaps' bsp luxels, overwriting occluded luxels
1441 */
1442
1443 static qboolean MergeBSPLuxels( rawLightmap_t *a, int aNum, rawLightmap_t *b, int bNum )
1444 {
1445         rawLightmap_t   *lm;
1446         int                             x, y;
1447         float                   luxel[ 3 ], *aLuxel, *bLuxel;
1448
1449
1450         /* basic tests */
1451         if( a->customWidth != b->customWidth || a->customHeight != b->customHeight ||
1452                 a->brightness != b->brightness ||
1453                 a->solid[ aNum ] != b->solid[ bNum ] ||
1454                 a->bspLuxels[ aNum ] == NULL || b->bspLuxels[ bNum ] == NULL )
1455                 return qfalse;
1456
1457         /* compare solid lightmaps */
1458         if( a->solid[ aNum ] && b->solid[ bNum ] )
1459         {
1460                 /* average */
1461                 VectorAdd( a->solidColor[ aNum ], b->solidColor[ bNum ], luxel );
1462                 VectorScale( luxel, 0.5f, luxel );
1463
1464                 /* copy to both */
1465                 VectorCopy( luxel, a->solidColor[ aNum ] );
1466                 VectorCopy( luxel, b->solidColor[ bNum ] );
1467
1468                 /* return to sender */
1469                 return qtrue;
1470         }
1471
1472         /* compare nonsolid lightmaps */
1473         if( a->w != b->w || a->h != b->h )
1474                 return qfalse;
1475
1476         /* merge luxels */
1477         for( y = 0; y < a->h; y++ )
1478         {
1479                 for( x = 0; x < a->w; x++ )
1480                 {
1481                         /* get luxels */
1482                         lm = a; aLuxel = BSP_LUXEL( aNum, x, y );
1483                         lm = b; bLuxel = BSP_LUXEL( bNum, x, y );
1484
1485                         /* handle occlusion mismatch */
1486                         if( aLuxel[ 0 ] < 0.0f )
1487                                 VectorCopy( bLuxel, aLuxel );
1488                         else if( bLuxel[ 0 ] < 0.0f )
1489                                 VectorCopy( aLuxel, bLuxel );
1490                         else
1491                         {
1492                                 /* average */
1493                                 VectorAdd( aLuxel, bLuxel, luxel );
1494                                 VectorScale( luxel, 0.5f, luxel );
1495
1496                                 /* debugging code */
1497                                 //%     luxel[ 2 ] += 64.0f;
1498
1499                                 /* copy to both */
1500                                 VectorCopy( luxel, aLuxel );
1501                                 VectorCopy( luxel, bLuxel );
1502                         }
1503                 }
1504         }
1505
1506         /* done */
1507         return qtrue;
1508 }
1509
1510
1511
1512 /*
1513 ApproximateLuxel()
1514 determines if a single luxel is can be approximated with the interpolated vertex rgba
1515 */
1516
1517 static qboolean ApproximateLuxel( rawLightmap_t *lm, bspDrawVert_t *dv )
1518 {
1519         int             i, x, y, d, lightmapNum;
1520         float   *luxel;
1521         vec3_t  color, vertexColor;
1522         byte    cb[ 4 ], vcb[ 4 ];
1523
1524
1525         /* find luxel xy coords */
1526         x = dv->lightmap[ 0 ][ 0 ] / superSample;
1527         y = dv->lightmap[ 0 ][ 1 ] / superSample;
1528         if( x < 0 )
1529                 x = 0;
1530         else if( x >= lm->w )
1531                 x = lm->w - 1;
1532         if( y < 0 )
1533                 y = 0;
1534         else if( y >= lm->h )
1535                 y = lm->h - 1;
1536
1537         /* walk list */
1538         for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
1539         {
1540                 /* early out */
1541                 if( lm->styles[ lightmapNum ] == LS_NONE )
1542                         continue;
1543
1544                 /* get luxel */
1545                 luxel = BSP_LUXEL( lightmapNum, x, y );
1546
1547                 /* ignore occluded luxels */
1548                 if( luxel[ 0 ] < 0.0f || luxel[ 1 ] < 0.0f || luxel[ 2 ] < 0.0f )
1549                         return qtrue;
1550
1551                 /* copy, set min color and compare */
1552                 VectorCopy( luxel, color );
1553                 VectorCopy( dv->color[ 0 ], vertexColor );
1554
1555                 /* styles are not affected by minlight */
1556                 if( lightmapNum == 0 )
1557                 {
1558                         for( i = 0; i < 3; i++ )
1559                         {
1560                                 /* set min color */
1561                                 if( color[ i ] < minLight[ i ] )
1562                                         color[ i ] = minLight[ i ];
1563                                 if( vertexColor[ i ] < minLight[ i ] )  /* note NOT minVertexLight */
1564                                         vertexColor[ i ] = minLight[ i ];
1565                         }
1566                 }
1567
1568                 /* set to bytes */
1569                 ColorToBytes( color, cb, 1.0f );
1570                 ColorToBytes( vertexColor, vcb, 1.0f );
1571
1572                 /* compare */
1573                 for( i = 0; i < 3; i++ )
1574                 {
1575                         d = cb[ i ] - vcb[ i ];
1576                         if( d < 0 )
1577                                 d *= -1;
1578                         if( d > approximateTolerance )
1579                                 return qfalse;
1580                 }
1581         }
1582
1583         /* close enough for the girls i date */
1584         return qtrue;
1585 }
1586
1587
1588
1589 /*
1590 ApproximateTriangle()
1591 determines if a single triangle can be approximated with vertex rgba
1592 */
1593
1594 static qboolean ApproximateTriangle_r( rawLightmap_t *lm, bspDrawVert_t *dv[ 3 ] )
1595 {
1596         bspDrawVert_t   mid, *dv2[ 3 ];
1597         int                             max;
1598
1599
1600         /* approximate the vertexes */
1601         if( ApproximateLuxel( lm, dv[ 0 ] ) == qfalse )
1602                 return qfalse;
1603         if( ApproximateLuxel( lm, dv[ 1 ] ) == qfalse )
1604                 return qfalse;
1605         if( ApproximateLuxel( lm, dv[ 2 ] ) == qfalse )
1606                 return qfalse;
1607
1608         /* subdivide calc */
1609         {
1610                 int                     i;
1611                 float           dx, dy, dist, maxDist;
1612
1613
1614                 /* find the longest edge and split it */
1615                 max = -1;
1616                 maxDist = 0;
1617                 for( i = 0; i < 3; i++ )
1618                 {
1619                         dx = dv[ i ]->lightmap[ 0 ][ 0 ] - dv[ (i + 1) % 3 ]->lightmap[ 0 ][ 0 ];
1620                         dy = dv[ i ]->lightmap[ 0 ][ 1 ] - dv[ (i + 1) % 3 ]->lightmap[ 0 ][ 1 ];
1621                         dist = sqrt( (dx * dx) + (dy * dy) );
1622                         if( dist > maxDist )
1623                         {
1624                                 maxDist = dist;
1625                                 max = i;
1626                         }
1627                 }
1628
1629                 /* try to early out */
1630                 if( i < 0 || maxDist < subdivideThreshold )
1631                         return qtrue;
1632         }
1633
1634         /* split the longest edge and map it */
1635         LerpDrawVert( dv[ max ], dv[ (max + 1) % 3 ], &mid );
1636         if( ApproximateLuxel( lm, &mid ) == qfalse )
1637                 return qfalse;
1638
1639         /* recurse to first triangle */
1640         VectorCopy( dv, dv2 );
1641         dv2[ max ] = &mid;
1642         if( ApproximateTriangle_r( lm, dv2 ) == qfalse )
1643                 return qfalse;
1644
1645         /* recurse to second triangle */
1646         VectorCopy( dv, dv2 );
1647         dv2[ (max + 1) % 3 ] = &mid;
1648         return ApproximateTriangle_r( lm, dv2 );
1649 }
1650
1651
1652
1653 /*
1654 ApproximateLightmap()
1655 determines if a raw lightmap can be approximated sufficiently with vertex colors
1656 */
1657
1658 static qboolean ApproximateLightmap( rawLightmap_t *lm )
1659 {
1660         int                                     n, num, i, x, y, pw[ 5 ], r;
1661         bspDrawSurface_t        *ds;
1662         surfaceInfo_t           *info;
1663         mesh_t                          src, *subdivided, *mesh;
1664         bspDrawVert_t           *verts, *dv[ 3 ];
1665         qboolean                        approximated;
1666
1667
1668         /* approximating? */
1669         if( approximateTolerance <= 0 )
1670                 return qfalse;
1671
1672         /* test for jmonroe */
1673         #if 0
1674                 /* don't approx lightmaps with styled twins */
1675                 if( lm->numStyledTwins > 0 )
1676                         return qfalse;
1677
1678                 /* don't approx lightmaps with styles */
1679                 for( i = 1; i < MAX_LIGHTMAPS; i++ )
1680                 {
1681                         if( lm->styles[ i ] != LS_NONE )
1682                                 return qfalse;
1683                 }
1684         #endif
1685
1686         /* assume reduced until shadow detail is found */
1687         approximated = qtrue;
1688
1689         /* walk the list of surfaces on this raw lightmap */
1690         for( n = 0; n < lm->numLightSurfaces; n++ )
1691         {
1692                 /* get surface */
1693                 num = lightSurfaces[ lm->firstLightSurface + n ];
1694                 ds = &bspDrawSurfaces[ num ];
1695                 info = &surfaceInfos[ num ];
1696
1697                 /* assume not-reduced initially */
1698                 info->approximated = qfalse;
1699
1700                 /* bail if lightmap doesn't match up */
1701                 if( info->lm != lm )
1702                         continue;
1703
1704                 /* bail if not vertex lit */
1705                 if( info->si->noVertexLight )
1706                         continue;
1707
1708                 /* assume that surfaces whose bounding boxes is smaller than 2x samplesize will be forced to vertex */
1709                 if( (info->maxs[ 0 ] - info->mins[ 0 ]) <= (2.0f * info->sampleSize) &&
1710                         (info->maxs[ 1 ] - info->mins[ 1 ]) <= (2.0f * info->sampleSize) &&
1711                         (info->maxs[ 2 ] - info->mins[ 2 ]) <= (2.0f * info->sampleSize) )
1712                 {
1713                         info->approximated = qtrue;
1714                         numSurfsVertexForced++;
1715                         continue;
1716                 }
1717
1718                 /* handle the triangles */
1719                 switch( ds->surfaceType )
1720                 {
1721                         case MST_PLANAR:
1722                                 /* get verts */
1723                                 verts = yDrawVerts + ds->firstVert;
1724
1725                                 /* map the triangles */
1726                                 info->approximated = qtrue;
1727                                 for( i = 0; i < ds->numIndexes && info->approximated; i += 3 )
1728                                 {
1729                                         dv[ 0 ] = &verts[ bspDrawIndexes[ ds->firstIndex + i ] ];
1730                                         dv[ 1 ] = &verts[ bspDrawIndexes[ ds->firstIndex + i + 1 ] ];
1731                                         dv[ 2 ] = &verts[ bspDrawIndexes[ ds->firstIndex + i + 2 ] ];
1732                                         info->approximated = ApproximateTriangle_r( lm, dv );
1733                                 }
1734                                 break;
1735
1736                         case MST_PATCH:
1737                                 /* make a mesh from the drawsurf */
1738                                 src.width = ds->patchWidth;
1739                                 src.height = ds->patchHeight;
1740                                 src.verts = &yDrawVerts[ ds->firstVert ];
1741                                 //%     subdivided = SubdivideMesh( src, 8, 512 );
1742                                 subdivided = SubdivideMesh2( src, info->patchIterations );
1743
1744                                 /* fit it to the curve and remove colinear verts on rows/columns */
1745                                 PutMeshOnCurve( *subdivided );
1746                                 mesh = RemoveLinearMeshColumnsRows( subdivided );
1747                                 FreeMesh( subdivided );
1748
1749                                 /* get verts */
1750                                 verts = mesh->verts;
1751
1752                                 /* map the mesh quads */
1753                                 info->approximated = qtrue;
1754                                 for( y = 0; y < (mesh->height - 1) && info->approximated; y++ )
1755                                 {
1756                                         for( x = 0; x < (mesh->width - 1) && info->approximated; x++ )
1757                                         {
1758                                                 /* set indexes */
1759                                                 pw[ 0 ] = x + (y * mesh->width);
1760                                                 pw[ 1 ] = x + ((y + 1) * mesh->width);
1761                                                 pw[ 2 ] = x + 1 + ((y + 1) * mesh->width);
1762                                                 pw[ 3 ] = x + 1 + (y * mesh->width);
1763                                                 pw[ 4 ] = x + (y * mesh->width);        /* same as pw[ 0 ] */
1764
1765                                                 /* set radix */
1766                                                 r = (x + y) & 1;
1767
1768                                                 /* get drawverts and map first triangle */
1769                                                 dv[ 0 ] = &verts[ pw[ r + 0 ] ];
1770                                                 dv[ 1 ] = &verts[ pw[ r + 1 ] ];
1771                                                 dv[ 2 ] = &verts[ pw[ r + 2 ] ];
1772                                                 info->approximated = ApproximateTriangle_r( lm, dv );
1773
1774                                                 /* get drawverts and map second triangle */
1775                                                 dv[ 0 ] = &verts[ pw[ r + 0 ] ];
1776                                                 dv[ 1 ] = &verts[ pw[ r + 2 ] ];
1777                                                 dv[ 2 ] = &verts[ pw[ r + 3 ] ];
1778                                                 if( info->approximated )
1779                                                         info->approximated = ApproximateTriangle_r( lm, dv );
1780                                         }
1781                                 }
1782
1783                                 /* free the mesh */
1784                                 FreeMesh( mesh );
1785                                 break;
1786
1787                         default:
1788                                 break;
1789                 }
1790
1791                 /* reduced? */
1792                 if( info->approximated == qfalse )
1793                         approximated = qfalse;
1794                 else
1795                         numSurfsVertexApproximated++;
1796         }
1797
1798         /* return */
1799         return approximated;
1800 }
1801
1802
1803
1804 /*
1805 TestOutLightmapStamp()
1806 tests a stamp on a given lightmap for validity
1807 */
1808
1809 static qboolean TestOutLightmapStamp( rawLightmap_t *lm, int lightmapNum, outLightmap_t *olm, int x, int y )
1810 {
1811         int                     sx, sy, ox, oy, offset;
1812         float           *luxel;
1813
1814
1815         /* bounds check */
1816         if( x < 0 || y < 0 || (x + lm->w) > olm->customWidth || (y + lm->h) > olm->customHeight )
1817                 return qfalse;
1818
1819         /* solid lightmaps test a 1x1 stamp */
1820         if( lm->solid[ lightmapNum ] )
1821         {
1822                 offset = (y * olm->customWidth) + x;
1823                 if( olm->lightBits[ offset >> 3 ] & (1 << (offset & 7)) )
1824                         return qfalse;
1825                 return qtrue;
1826         }
1827
1828         /* test the stamp */
1829         for( sy = 0; sy < lm->h; sy++ )
1830         {
1831                 for( sx = 0; sx < lm->w; sx++ )
1832                 {
1833                         /* get luxel */
1834                         luxel = BSP_LUXEL( lightmapNum, sx, sy );
1835                         if( luxel[ 0 ] < 0.0f )
1836                                 continue;
1837
1838                         /* get bsp lightmap coords and test */
1839                         ox = x + sx;
1840                         oy = y + sy;
1841                         offset = (oy * olm->customWidth) + ox;
1842                         if( olm->lightBits[ offset >> 3 ] & (1 << (offset & 7)) )
1843                                 return qfalse;
1844                 }
1845         }
1846
1847         /* stamp is empty */
1848         return qtrue;
1849 }
1850
1851
1852
1853 /*
1854 SetupOutLightmap()
1855 sets up an output lightmap
1856 */
1857
1858 static void SetupOutLightmap( rawLightmap_t *lm, outLightmap_t *olm )
1859 {
1860         /* dummy check */
1861         if( lm == NULL || olm == NULL )
1862                 return;
1863
1864         /* is this a "normal" bsp-stored lightmap? */
1865         if( (lm->customWidth == game->lightmapSize && lm->customHeight == game->lightmapSize) || externalLightmaps )
1866         {
1867                 olm->lightmapNum = numBSPLightmaps;
1868                 numBSPLightmaps++;
1869
1870                 /* lightmaps are interleaved with light direction maps */
1871                 if( deluxemap )
1872                         numBSPLightmaps++;
1873         }
1874         else
1875                 olm->lightmapNum = -3;
1876
1877         /* set external lightmap number */
1878         olm->extLightmapNum = -1;
1879
1880         /* set it up */
1881         olm->numLightmaps = 0;
1882         olm->customWidth = lm->customWidth;
1883         olm->customHeight = lm->customHeight;
1884         olm->freeLuxels = olm->customWidth * olm->customHeight;
1885         olm->numShaders = 0;
1886
1887         /* allocate buffers */
1888         olm->lightBits = safe_malloc( (olm->customWidth * olm->customHeight / 8) + 8 );
1889         memset( olm->lightBits, 0, (olm->customWidth * olm->customHeight / 8) + 8 );
1890         olm->bspLightBytes = safe_malloc( olm->customWidth * olm->customHeight * 3 );
1891         memset( olm->bspLightBytes, 0, olm->customWidth * olm->customHeight * 3 );
1892         if( deluxemap )
1893         {
1894                 olm->bspDirBytes = safe_malloc( olm->customWidth * olm->customHeight * 3 );
1895                 memset( olm->bspDirBytes, 0, olm->customWidth * olm->customHeight * 3 );
1896         }
1897 }
1898
1899
1900
1901 /*
1902 FindOutLightmaps()
1903 for a given surface lightmap, find output lightmap pages and positions for it
1904 */
1905
1906 static void FindOutLightmaps( rawLightmap_t *lm )
1907 {
1908         int                                     i, j, lightmapNum, xMax, yMax, x, y, sx, sy, ox, oy, offset, temp;
1909         outLightmap_t           *olm;
1910         surfaceInfo_t           *info;
1911         float                           *luxel, *deluxel;
1912         vec3_t                          color, direction;
1913         byte                            *pixel;
1914         qboolean                        ok;
1915
1916
1917         /* set default lightmap number (-3 = LIGHTMAP_BY_VERTEX) */
1918         for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
1919                 lm->outLightmapNums[ lightmapNum ] = -3;
1920
1921         /* can this lightmap be approximated with vertex color? */
1922         if( ApproximateLightmap( lm ) )
1923                 return;
1924
1925         /* walk list */
1926         for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
1927         {
1928                 /* early out */
1929                 if( lm->styles[ lightmapNum ] == LS_NONE )
1930                         continue;
1931
1932                 /* don't store twinned lightmaps */
1933                 if( lm->twins[ lightmapNum ] != NULL )
1934                         continue;
1935
1936                 /* if this is a styled lightmap, try some normalized locations first */
1937                 ok = qfalse;
1938                 if( lightmapNum > 0 && outLightmaps != NULL )
1939                 {
1940                         /* loop twice */
1941                         for( j = 0; j < 2; j++ )
1942                         {
1943                                 /* try identical position */
1944                                 for( i = 0; i < numOutLightmaps; i++ )
1945                                 {
1946                                         /* get the output lightmap */
1947                                         olm = &outLightmaps[ i ];
1948
1949                                         /* simple early out test */
1950                                         if( olm->freeLuxels < lm->used )
1951                                                 continue;
1952
1953                                         /* don't store non-custom raw lightmaps on custom bsp lightmaps */
1954                                         if( olm->customWidth != lm->customWidth ||
1955                                                 olm->customHeight != lm->customHeight )
1956                                                 continue;
1957
1958                                         /* try identical */
1959                                         if( j == 0 )
1960                                         {
1961                                                 x = lm->lightmapX[ 0 ];
1962                                                 y = lm->lightmapY[ 0 ];
1963                                                 ok = TestOutLightmapStamp( lm, lightmapNum, olm, x, y );
1964                                         }
1965
1966                                         /* try shifting */
1967                                         else
1968                                         {
1969                                                 for( sy = -1; sy <= 1; sy++ )
1970                                                 {
1971                                                         for( sx = -1; sx <= 1; sx++ )
1972                                                         {
1973                                                                 x = lm->lightmapX[ 0 ] + sx * (olm->customWidth >> 1);  //%     lm->w;
1974                                                                 y = lm->lightmapY[ 0 ] + sy * (olm->customHeight >> 1); //%     lm->h;
1975                                                                 ok = TestOutLightmapStamp( lm, lightmapNum, olm, x, y );
1976
1977                                                                 if( ok )
1978                                                                         break;
1979                                                         }
1980
1981                                                         if( ok )
1982                                                                 break;
1983                                                 }
1984                                         }
1985
1986                                         if( ok )
1987                                                 break;
1988                                 }
1989
1990                                 if( ok )
1991                                         break;
1992                         }
1993                 }
1994
1995                 /* try normal placement algorithm */
1996                 if( ok == qfalse )
1997                 {
1998                         /* reset origin */
1999                         x = 0;
2000                         y = 0;
2001
2002                         /* walk the list of lightmap pages */
2003                         for( i = 0; i < numOutLightmaps; i++ )
2004                         {
2005                                 /* get the output lightmap */
2006                                 olm = &outLightmaps[ i ];
2007
2008                                 /* simple early out test */
2009                                 if( olm->freeLuxels < lm->used )
2010                                         continue;
2011
2012                                 /* don't store non-custom raw lightmaps on custom bsp lightmaps */
2013                                 if( olm->customWidth != lm->customWidth ||
2014                                         olm->customHeight != lm->customHeight )
2015                                         continue;
2016
2017                                 /* set maxs */
2018                                 if( lm->solid[ lightmapNum ] )
2019                                 {
2020                                         xMax = olm->customWidth;
2021                                         yMax = olm->customHeight;
2022                                 }
2023                                 else
2024                                 {
2025                                         xMax = (olm->customWidth - lm->w) + 1;
2026                                         yMax = (olm->customHeight - lm->h) + 1;
2027                                 }
2028
2029                                 /* walk the origin around the lightmap */
2030                                 for( y = 0; y < yMax; y++ )
2031                                 {
2032                                         for( x = 0; x < xMax; x++ )
2033                                         {
2034                                                 /* find a fine tract of lauhnd */
2035                                                 ok = TestOutLightmapStamp( lm, lightmapNum, olm, x, y );
2036
2037                                                 if( ok )
2038                                                         break;
2039                                         }
2040
2041                                         if( ok )
2042                                                 break;
2043                                 }
2044
2045                                 if( ok )
2046                                         break;
2047
2048                                 /* reset x and y */
2049                                 x = 0;
2050                                 y = 0;
2051                         }
2052                 }
2053
2054                 /* no match? */
2055                 if( ok == qfalse )
2056                 {
2057                         /* allocate two new output lightmaps */
2058                         numOutLightmaps += 2;
2059                         olm = safe_malloc( numOutLightmaps * sizeof( outLightmap_t ) );
2060                         if( outLightmaps != NULL && numOutLightmaps > 2 )
2061                         {
2062                                 memcpy( olm, outLightmaps, (numOutLightmaps - 2) * sizeof( outLightmap_t ) );
2063                                 free( outLightmaps );
2064                         }
2065                         outLightmaps = olm;
2066
2067                         /* initialize both out lightmaps */
2068                         SetupOutLightmap( lm, &outLightmaps[ numOutLightmaps - 2 ] );
2069                         SetupOutLightmap( lm, &outLightmaps[ numOutLightmaps - 1 ] );
2070
2071                         /* set out lightmap */
2072                         i = numOutLightmaps - 2;
2073                         olm = &outLightmaps[ i ];
2074
2075                         /* set stamp xy origin to the first surface lightmap */
2076                         if( lightmapNum > 0 )
2077                         {
2078                                 x = lm->lightmapX[ 0 ];
2079                                 y = lm->lightmapY[ 0 ];
2080                         }
2081                 }
2082
2083                 /* if this is a style-using lightmap, it must be exported */
2084                 if( lightmapNum > 0 && game->load != LoadRBSPFile )
2085                         olm->extLightmapNum = 0;
2086
2087                 /* add the surface lightmap to the bsp lightmap */
2088                 lm->outLightmapNums[ lightmapNum ] = i;
2089                 lm->lightmapX[ lightmapNum ] = x;
2090                 lm->lightmapY[ lightmapNum ] = y;
2091                 olm->numLightmaps++;
2092
2093                 /* add shaders */
2094                 for( i = 0; i < lm->numLightSurfaces; i++ )
2095                 {
2096                         /* get surface info */
2097                         info = &surfaceInfos[ lightSurfaces[ lm->firstLightSurface + i ] ];
2098
2099                         /* test for shader */
2100                         for( j = 0; j < olm->numShaders; j++ )
2101                         {
2102                                 if( olm->shaders[ j ] == info->si )
2103                                         break;
2104                         }
2105
2106                         /* if it doesn't exist, add it */
2107                         if( j >= olm->numShaders && olm->numShaders < MAX_LIGHTMAP_SHADERS )
2108                         {
2109                                 olm->shaders[ olm->numShaders ] = info->si;
2110                                 olm->numShaders++;
2111                                 numLightmapShaders++;
2112                         }
2113                 }
2114
2115                 /* set maxs */
2116                 if( lm->solid[ lightmapNum ] )
2117                 {
2118                         xMax = 1;
2119                         yMax = 1;
2120                 }
2121                 else
2122                 {
2123                         xMax = lm->w;
2124                         yMax = lm->h;
2125                 }
2126
2127                 /* mark the bits used */
2128                 for( y = 0; y < yMax; y++ )
2129                 {
2130                         for( x = 0; x < xMax; x++ )
2131                         {
2132                                 /* get luxel */
2133                                 luxel = BSP_LUXEL( lightmapNum, x, y );
2134                                 deluxel = BSP_DELUXEL( x, y );
2135                                 if( luxel[ 0 ] < 0.0f && !lm->solid[ lightmapNum ])
2136                                         continue;
2137
2138                                 /* set minimum light */
2139                                 if( lm->solid[ lightmapNum ] )
2140                                 {
2141                                         if( debug )
2142                                                 VectorSet( color, 255.0f, 0.0f, 0.0f );
2143                                         else
2144                                                 VectorCopy( lm->solidColor[ lightmapNum ], color );
2145                                 }
2146                                 else
2147                                         VectorCopy( luxel, color );
2148
2149                                 /* styles are not affected by minlight */
2150                                 if( lightmapNum == 0 )
2151                                 {
2152                                         for( i = 0; i < 3; i++ )
2153                                         {
2154                                                 if( color[ i ] < minLight[ i ] )
2155                                                         color[ i ] = minLight[ i ];
2156                                         }
2157                                 }
2158
2159                                 /* get bsp lightmap coords  */
2160                                 ox = x + lm->lightmapX[ lightmapNum ];
2161                                 oy = y + lm->lightmapY[ lightmapNum ];
2162                                 offset = (oy * olm->customWidth) + ox;
2163
2164                                 /* flag pixel as used */
2165                                 olm->lightBits[ offset >> 3 ] |= (1 << (offset & 7));
2166                                 olm->freeLuxels--;
2167
2168                                 /* store color */
2169                                 pixel = olm->bspLightBytes + (((oy * olm->customWidth) + ox) * 3);
2170                                 if(deluxemap)
2171                                         ColorToBytesDeluxe( color, pixel, lm->brightness, deluxel, olm->bspDirBytes + (((oy * olm->customWidth) + ox) * 3));
2172                                 else
2173                                         ColorToBytes( color, pixel, lm->brightness );
2174                         }
2175                 }
2176         }
2177 }
2178
2179
2180
2181 /*
2182 CompareRawLightmap()
2183 compare function for qsort()
2184 */
2185
2186 static int CompareRawLightmap( const void *a, const void *b )
2187 {
2188         rawLightmap_t   *alm, *blm;
2189         surfaceInfo_t   *aInfo, *bInfo;
2190         int                             i, min, diff;
2191
2192
2193         /* get lightmaps */
2194         alm = &rawLightmaps[ *((int*) a) ];
2195         blm = &rawLightmaps[ *((int*) b) ];
2196
2197         /* get min number of surfaces */
2198         min = (alm->numLightSurfaces < blm->numLightSurfaces ? alm->numLightSurfaces : blm->numLightSurfaces);
2199
2200         /* iterate */
2201         for( i = 0; i < min; i++ )
2202         {
2203                 /* get surface info */
2204                 aInfo = &surfaceInfos[ lightSurfaces[ alm->firstLightSurface + i ] ];
2205                 bInfo = &surfaceInfos[ lightSurfaces[ blm->firstLightSurface + i ] ];
2206
2207                 /* compare shader names */
2208                 diff = strcmp( aInfo->si->shader, bInfo->si->shader );
2209                 if( diff != 0 )
2210                         return diff;
2211         }
2212
2213         /* test style count */
2214         diff = 0;
2215         for( i = 0; i < MAX_LIGHTMAPS; i++ )
2216                 diff += blm->styles[ i ] - alm->styles[ i ];
2217         if( diff )
2218                 return diff;
2219
2220         /* compare size */
2221         diff = (blm->w * blm->h) - (alm->w * alm->h);
2222         if( diff != 0 )
2223                 return diff;
2224
2225         /* must be equivalent */
2226         return 0;
2227 }
2228
2229
2230
2231 /*
2232 StoreSurfaceLightmaps()
2233 stores the surface lightmaps into the bsp as byte rgb triplets
2234 */
2235
2236 void StoreSurfaceLightmaps( void )
2237 {
2238         int                                     i, j, k, x, y, lx, ly, sx, sy, *cluster, mappedSamples;
2239         int                                     style, size, lightmapNum, lightmapNum2;
2240         float                           *normal, *luxel, *bspLuxel, *bspLuxel2, *radLuxel, samples, occludedSamples;
2241         vec3_t                          sample, occludedSample, dirSample, colorMins, colorMaxs;
2242         float                           *deluxel, *bspDeluxel, *bspDeluxel2;
2243         byte                            *lb;
2244         int                                     numUsed, numTwins, numTwinLuxels, numStored;
2245         float                           lmx, lmy, efficiency;
2246         vec3_t                          color;
2247         bspDrawSurface_t        *ds, *parent, dsTemp;
2248         surfaceInfo_t           *info;
2249         rawLightmap_t           *lm, *lm2;
2250         outLightmap_t           *olm;
2251         bspDrawVert_t           *dv, *ydv, *dvParent;
2252         char                            dirname[ 1024 ], filename[ 1024 ];
2253         shaderInfo_t            *csi;
2254         char                            lightmapName[ 128 ];
2255         char                            *rgbGenValues[ 256 ];
2256         char                            *alphaGenValues[ 256 ];
2257
2258
2259         /* note it */
2260         Sys_Printf( "--- StoreSurfaceLightmaps ---\n");
2261
2262         /* setup */
2263         strcpy( dirname, source );
2264         StripExtension( dirname );
2265         memset( rgbGenValues, 0, sizeof( rgbGenValues ) );
2266         memset( alphaGenValues, 0, sizeof( alphaGenValues ) );
2267
2268         /* -----------------------------------------------------------------
2269            average the sampled luxels into the bsp luxels
2270            ----------------------------------------------------------------- */
2271
2272         /* note it */
2273         Sys_FPrintf( SYS_VRB, "Subsampling..." );
2274
2275         /* walk the list of raw lightmaps */
2276         numUsed = 0;
2277         numTwins = 0;
2278         numTwinLuxels = 0;
2279         numSolidLightmaps = 0;
2280         for( i = 0; i < numRawLightmaps; i++ )
2281         {
2282                 /* get lightmap */
2283                 lm = &rawLightmaps[ i ];
2284
2285                 /* walk individual lightmaps */
2286                 for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
2287                 {
2288                         /* early outs */
2289                         if( lm->superLuxels[ lightmapNum ] == NULL )
2290                                 continue;
2291
2292                         /* allocate bsp luxel storage */
2293                         if( lm->bspLuxels[ lightmapNum ] == NULL )
2294                         {
2295                                 size = lm->w * lm->h * BSP_LUXEL_SIZE * sizeof( float );
2296                                 lm->bspLuxels[ lightmapNum ] = safe_malloc( size );
2297                                 memset( lm->bspLuxels[ lightmapNum ], 0, size );
2298                         }
2299
2300                         /* allocate radiosity lightmap storage */
2301                         if( bounce )
2302                         {
2303                                 size = lm->w * lm->h * RAD_LUXEL_SIZE * sizeof( float );
2304                                 if( lm->radLuxels[ lightmapNum ] == NULL )
2305                                         lm->radLuxels[ lightmapNum ] = safe_malloc( size );
2306                                 memset( lm->radLuxels[ lightmapNum ], 0, size );
2307                         }
2308
2309                         /* average supersampled luxels */
2310                         for( y = 0; y < lm->h; y++ )
2311                         {
2312                                 for( x = 0; x < lm->w; x++ )
2313                                 {
2314                                         /* subsample */
2315                                         samples = 0.0f;
2316                                         occludedSamples = 0.0f;
2317                                         mappedSamples = 0;
2318                                         VectorClear( sample );
2319                                         VectorClear( occludedSample );
2320                                         VectorClear( dirSample );
2321                                         for( ly = 0; ly < superSample; ly++ )
2322                                         {
2323                                                 for( lx = 0; lx < superSample; lx++ )
2324                                                 {
2325                                                         /* sample luxel */
2326                                                         sx = x * superSample + lx;
2327                                                         sy = y * superSample + ly;
2328                                                         luxel = SUPER_LUXEL( lightmapNum, sx, sy );
2329                                                         deluxel = SUPER_DELUXEL( sx, sy );
2330                                                         normal = SUPER_NORMAL( sx, sy );
2331                                                         cluster = SUPER_CLUSTER( sx, sy );
2332
2333                                                         /* sample deluxemap */
2334                                                         if( deluxemap && lightmapNum == 0 )
2335                                                         {
2336                                                                 VectorAdd( dirSample, deluxel, dirSample );
2337                                                                 dirSample[3] += deluxel[3];
2338                                                         }
2339
2340                                                         /* keep track of used/occluded samples */
2341                                                         if( *cluster != CLUSTER_UNMAPPED )
2342                                                                 mappedSamples++;
2343
2344                                                         /* handle lightmap border? */
2345                                                         if( lightmapBorder && (sx == 0 || sx == (lm->sw - 1) || sy == 0 || sy == (lm->sh - 1) ) && luxel[ 3 ] > 0.0f )
2346                                                         {
2347                                                                 VectorSet( sample, 255.0f, 0.0f, 0.0f );
2348                                                                 samples += 1.0f;
2349                                                         }
2350
2351                                                         /* handle debug */
2352                                                         else if( debug && *cluster < 0 )
2353                                                         {
2354                                                                 if( *cluster == CLUSTER_UNMAPPED )
2355                                                                         VectorSet( luxel, 255, 204, 0 );
2356                                                                 else if( *cluster == CLUSTER_OCCLUDED )
2357                                                                         VectorSet( luxel, 255, 0, 255 );
2358                                                                 else if( *cluster == CLUSTER_FLOODED )
2359                                                                         VectorSet( luxel, 0, 32, 255 );
2360                                                                 VectorAdd( occludedSample, luxel, occludedSample );
2361                                                                 occludedSamples += 1.0f;
2362                                                         }
2363
2364                                                         /* normal luxel handling */
2365                                                         else if( luxel[ 3 ] > 0.0f )
2366                                                         {
2367                                                                 /* handle lit or flooded luxels */
2368                                                                 if( *cluster > 0 || *cluster == CLUSTER_FLOODED )
2369                                                                 {
2370                                                                         VectorAdd( sample, luxel, sample );
2371                                                                         samples += luxel[ 3 ];
2372                                                                 }
2373
2374                                                                 /* handle occluded or unmapped luxels */
2375                                                                 else
2376                                                                 {
2377                                                                         VectorAdd( occludedSample, luxel, occludedSample );
2378                                                                         occludedSamples += luxel[ 3 ];
2379                                                                 }
2380
2381                                                                 /* handle style debugging */
2382                                                                 if( debug && lightmapNum > 0 && x < 2 && y < 2 )
2383                                                                 {
2384                                                                         VectorCopy( debugColors[ 0 ], sample );
2385                                                                         samples = 1;
2386                                                                 }
2387                                                         }
2388                                                 }
2389                                         }
2390
2391                                         /* only use occluded samples if necessary */
2392                                         if( samples <= 0.0f )
2393                                         {
2394                                                 VectorCopy( occludedSample, sample );
2395                                                 samples = occludedSamples;
2396                                         }
2397
2398                                         /* get luxels */
2399                                         luxel = SUPER_LUXEL( lightmapNum, x, y );
2400                                         deluxel = SUPER_DELUXEL( x, y );
2401
2402                                         /* store light direction */
2403                                         if( deluxemap && lightmapNum == 0 )
2404                                         {
2405                                                 VectorCopy( dirSample, deluxel );
2406                                                 dirSample[3] = deluxel[3];
2407                                         }
2408
2409                                         /* store the sample back in super luxels */
2410                                         if( samples > 0.01f )
2411                                         {
2412                                                 VectorScale( sample, (1.0f / samples), luxel );
2413                                                 luxel[ 3 ] = 1.0f;
2414                                         }
2415
2416                                         /* if any samples were mapped in any way, store ambient color */
2417                                         else if( mappedSamples > 0 )
2418                                         {
2419                                                 if( lightmapNum == 0 )
2420                                                         VectorCopy( ambientColor, luxel );
2421                                                 else
2422                                                         VectorClear( luxel );
2423                                                 luxel[ 3 ] = 1.0f;
2424                                         }
2425
2426                                         /* store a bogus value to be fixed later */
2427                                         else
2428                                         {
2429                                                 VectorClear( luxel );
2430                                                 luxel[ 3 ] = -1.0f;
2431                                         }
2432                                 }
2433                         }
2434
2435                         /* setup */
2436                         lm->used = 0;
2437                         ClearBounds( colorMins, colorMaxs );
2438
2439                         /* clean up and store into bsp luxels */
2440                         for( y = 0; y < lm->h; y++ )
2441                         {
2442                                 for( x = 0; x < lm->w; x++ )
2443                                 {
2444                                         /* get luxels */
2445                                         luxel = SUPER_LUXEL( lightmapNum, x, y );
2446                                         deluxel = SUPER_DELUXEL( x, y );
2447
2448                                         /* copy light direction */
2449                                         if( deluxemap && lightmapNum == 0 )
2450                                         {
2451                                                 VectorCopy( deluxel, dirSample );
2452                                                 dirSample[3] = deluxel[3];
2453                                         }
2454
2455                                         /* is this a valid sample? */
2456                                         if( luxel[ 3 ] > 0.0f )
2457                                         {
2458                                                 VectorCopy( luxel, sample );
2459                                                 samples = luxel[ 3 ];
2460                                                 numUsed++;
2461                                                 lm->used++;
2462
2463                                                 /* fix negative samples */
2464                                                 for( j = 0; j < 3; j++ )
2465                                                 {
2466                                                         if( sample[ j ] < 0.0f )
2467                                                                 sample[ j ] = 0.0f;
2468                                                 }
2469                                         }
2470                                         else
2471                                         {
2472                                                 /* nick an average value from the neighbors */
2473                                                 VectorClear( sample );
2474                                                 VectorClear( dirSample );
2475                                                 samples = 0.0f;
2476
2477                                                 /* fixme: why is this disabled?? */
2478                                                 for( sy = (y - 1); sy <= (y + 1); sy++ )
2479                                                 {
2480                                                         if( sy < 0 || sy >= lm->h )
2481                                                                 continue;
2482
2483                                                         for( sx = (x - 1); sx <= (x + 1); sx++ )
2484                                                         {
2485                                                                 if( sx < 0 || sx >= lm->w || (sx == x && sy == y) )
2486                                                                         continue;
2487
2488                                                                 /* get neighbor's particulars */
2489                                                                 luxel = SUPER_LUXEL( lightmapNum, sx, sy );
2490                                                                 if( luxel[ 3 ] < 0.0f )
2491                                                                         continue;
2492                                                                 VectorAdd( sample, luxel, sample );
2493                                                                 samples += luxel[ 3 ];
2494                                                         }
2495                                                 }
2496
2497                                                 /* no samples? */
2498                                                 if( samples == 0.0f )
2499                                                 {
2500                                                         VectorSet( sample, -1.0f, -1.0f, -1.0f );
2501                                                         samples = 1.0f;
2502                                                 }
2503                                                 else
2504                                                 {
2505                                                         numUsed++;
2506                                                         lm->used++;
2507
2508                                                         /* fix negative samples */
2509                                                         for( j = 0; j < 3; j++ )
2510                                                         {
2511                                                                 if( sample[ j ] < 0.0f )
2512                                                                         sample[ j ] = 0.0f;
2513                                                         }
2514                                                 }
2515                                         }
2516
2517                                         /* scale the sample */
2518                                         VectorScale( sample, (1.0f / samples), sample );
2519
2520                                         /* store the sample in the radiosity luxels */
2521                                         if( bounce > 0 )
2522                                         {
2523                                                 radLuxel = RAD_LUXEL( lightmapNum, x, y );
2524                                                 VectorCopy( sample, radLuxel );
2525
2526                                                 /* if only storing bounced light, early out here */
2527                                                 if( bounceOnly && !bouncing )
2528                                                         continue;
2529                                         }
2530
2531                                         /* store the sample in the bsp luxels */
2532                                         bspLuxel = BSP_LUXEL( lightmapNum, x, y );
2533                                         bspDeluxel = BSP_DELUXEL( x, y );
2534
2535                                         VectorAdd( bspLuxel, sample, bspLuxel );
2536                                         if( deluxemap && lightmapNum == 0 )
2537                                         {
2538                                                 VectorAdd( bspDeluxel, dirSample, bspDeluxel );
2539                                                 bspDeluxel[3] += dirSample[3];
2540                                         }
2541
2542                                         /* add color to bounds for solid checking */
2543                                         if( samples > 0.0f )
2544                                                 AddPointToBounds( bspLuxel, colorMins, colorMaxs );
2545                                 }
2546                         }
2547
2548                         /* set solid color */
2549                         lm->solid[ lightmapNum ] = qfalse;
2550                         VectorAdd( colorMins, colorMaxs, lm->solidColor[ lightmapNum ] );
2551                         VectorScale( lm->solidColor[ lightmapNum ], 0.5f, lm->solidColor[ lightmapNum ] );
2552
2553                         /* nocollapse prevents solid lightmaps */
2554                         if( noCollapse == qfalse )
2555                         {
2556                                 /* check solid color */
2557                                 VectorSubtract( colorMaxs, colorMins, sample );
2558                                 if( (sample[ 0 ] <= SOLID_EPSILON && sample[ 1 ] <= SOLID_EPSILON && sample[ 2 ] <= SOLID_EPSILON) ||
2559                                         (lm->w <= 2 && lm->h <= 2) )    /* small lightmaps get forced to solid color */
2560                                 {
2561                                         /* set to solid */
2562                                         VectorCopy( colorMins, lm->solidColor[ lightmapNum ] );
2563                                         lm->solid[ lightmapNum ] = qtrue;
2564                                         numSolidLightmaps++;
2565                                 }
2566
2567                                 /* if all lightmaps aren't solid, then none of them are solid */
2568                                 if( lm->solid[ lightmapNum ] != lm->solid[ 0 ] )
2569                                 {
2570                                         for( y = 0; y < MAX_LIGHTMAPS; y++ )
2571                                         {
2572                                                 if( lm->solid[ y ] )
2573                                                         numSolidLightmaps--;
2574                                                 lm->solid[ y ] = qfalse;
2575                                         }
2576                                 }
2577                         }
2578
2579                         /* wrap bsp luxels if necessary */
2580                         if( lm->wrap[ 0 ] )
2581                         {
2582                                 for( y = 0; y < lm->h; y++ )
2583                                 {
2584                                         bspLuxel = BSP_LUXEL( lightmapNum, 0, y );
2585                                         bspLuxel2 = BSP_LUXEL( lightmapNum, lm->w - 1, y );
2586                                         VectorAdd( bspLuxel, bspLuxel2, bspLuxel );
2587                                         VectorScale( bspLuxel, 0.5f, bspLuxel );
2588                                         VectorCopy( bspLuxel, bspLuxel2 );
2589                                         if( deluxemap && lightmapNum == 0 )
2590                                         {
2591                                                 bspDeluxel = BSP_DELUXEL( 0, y );
2592                                                 bspDeluxel2 = BSP_DELUXEL( lm->w - 1, y );
2593                                                 VectorAdd( bspDeluxel, bspDeluxel2, bspDeluxel );
2594                                                 VectorScale( bspDeluxel, 0.5f, bspDeluxel );
2595                                                 VectorCopy( bspDeluxel, bspDeluxel2 );
2596                                                 bspDeluxel2[3] = bspDeluxel[3] = (bspDeluxel[3] + bspDeluxel2[3]) * 0.5f;
2597                                         }
2598                                 }
2599                         }
2600                         if( lm->wrap[ 1 ] )
2601                         {
2602                                 for( x = 0; x < lm->w; x++ )
2603                                 {
2604                                         bspLuxel = BSP_LUXEL( lightmapNum, x, 0 );
2605                                         bspLuxel2 = BSP_LUXEL( lightmapNum, x, lm->h - 1 );
2606                                         VectorAdd( bspLuxel, bspLuxel2, bspLuxel );
2607                                         VectorScale( bspLuxel, 0.5f, bspLuxel );
2608                                         VectorCopy( bspLuxel, bspLuxel2 );
2609                                         if( deluxemap && lightmapNum == 0 )
2610                                         {
2611                                                 bspDeluxel = BSP_DELUXEL( x, 0 );
2612                                                 bspDeluxel2 = BSP_DELUXEL( x, lm->h - 1 );
2613                                                 VectorAdd( bspDeluxel, bspDeluxel2, bspDeluxel );
2614                                                 VectorScale( bspDeluxel, 0.5f, bspDeluxel );
2615                                                 VectorCopy( bspDeluxel, bspDeluxel2 );
2616                                                 bspDeluxel2[3] = bspDeluxel[3] = (bspDeluxel[3] + bspDeluxel2[3]) * 0.5f;
2617                                         }
2618                                 }
2619                         }
2620                 }
2621         }
2622
2623         /* -----------------------------------------------------------------
2624            collapse non-unique lightmaps
2625            ----------------------------------------------------------------- */
2626
2627         if( noCollapse == qfalse && deluxemap == qfalse )
2628         {
2629                 /* note it */
2630                 Sys_FPrintf( SYS_VRB, "collapsing..." );
2631
2632                 /* set all twin refs to null */
2633                 for( i = 0; i < numRawLightmaps; i++ )
2634                 {
2635                         for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
2636                         {
2637                                 rawLightmaps[ i ].twins[ lightmapNum ] = NULL;
2638                                 rawLightmaps[ i ].twinNums[ lightmapNum ] = -1;
2639                                 rawLightmaps[ i ].numStyledTwins = 0;
2640                         }
2641                 }
2642
2643                 /* walk the list of raw lightmaps */
2644                 for( i = 0; i < numRawLightmaps; i++ )
2645                 {
2646                         /* get lightmap */
2647                         lm = &rawLightmaps[ i ];
2648
2649                         /* walk lightmaps */
2650                         for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
2651                         {
2652                                 /* early outs */
2653                                 if( lm->bspLuxels[ lightmapNum ] == NULL ||
2654                                         lm->twins[ lightmapNum ] != NULL )
2655                                         continue;
2656
2657                                 /* find all lightmaps that are virtually identical to this one */
2658                                 for( j = i + 1; j < numRawLightmaps; j++ )
2659                                 {
2660                                         /* get lightmap */
2661                                         lm2 = &rawLightmaps[ j ];
2662
2663                                         /* walk lightmaps */
2664                                         for( lightmapNum2 = 0; lightmapNum2 < MAX_LIGHTMAPS; lightmapNum2++ )
2665                                         {
2666                                                 /* early outs */
2667                                                 if( lm2->bspLuxels[ lightmapNum2 ] == NULL ||
2668                                                         lm2->twins[ lightmapNum2 ] != NULL )
2669                                                         continue;
2670
2671                                                 /* compare them */
2672                                                 if( CompareBSPLuxels( lm, lightmapNum, lm2, lightmapNum2 ) )
2673                                                 {
2674                                                         /* merge and set twin */
2675                                                         if( MergeBSPLuxels( lm, lightmapNum, lm2, lightmapNum2 ) )
2676                                                         {
2677                                                                 lm2->twins[ lightmapNum2 ] = lm;
2678                                                                 lm2->twinNums[ lightmapNum2 ] = lightmapNum;
2679                                                                 numTwins++;
2680                                                                 numTwinLuxels += (lm->w * lm->h);
2681
2682                                                                 /* count styled twins */
2683                                                                 if( lightmapNum > 0 )
2684                                                                         lm->numStyledTwins++;
2685                                                         }
2686                                                 }
2687                                         }
2688                                 }
2689                         }
2690                 }
2691         }
2692
2693         /* -----------------------------------------------------------------
2694            sort raw lightmaps by shader
2695            ----------------------------------------------------------------- */
2696
2697         /* note it */
2698         Sys_FPrintf( SYS_VRB, "sorting..." );
2699
2700         /* allocate a new sorted list */
2701         if( sortLightmaps == NULL )
2702                 sortLightmaps = safe_malloc( numRawLightmaps * sizeof( int ) );
2703
2704         /* fill it out and sort it */
2705         for( i = 0; i < numRawLightmaps; i++ )
2706                 sortLightmaps[ i ] = i;
2707         qsort( sortLightmaps, numRawLightmaps, sizeof( int ), CompareRawLightmap );
2708
2709         /* -----------------------------------------------------------------
2710            allocate output lightmaps
2711            ----------------------------------------------------------------- */
2712
2713         /* note it */
2714         Sys_FPrintf( SYS_VRB, "allocating..." );
2715
2716         /* kill all existing output lightmaps */
2717         if( outLightmaps != NULL )
2718         {
2719                 for( i = 0; i < numOutLightmaps; i++ )
2720                 {
2721                         free( outLightmaps[ i ].lightBits );
2722                         free( outLightmaps[ i ].bspLightBytes );
2723                 }
2724                 free( outLightmaps );
2725                 outLightmaps = NULL;
2726         }
2727
2728         numLightmapShaders = 0;
2729         numOutLightmaps = 0;
2730         numBSPLightmaps = 0;
2731         numExtLightmaps = 0;
2732
2733         /* find output lightmap */
2734         for( i = 0; i < numRawLightmaps; i++ )
2735         {
2736                 lm = &rawLightmaps[ sortLightmaps[ i ] ];
2737                 FindOutLightmaps( lm );
2738         }
2739
2740         /* set output numbers in twinned lightmaps */
2741         for( i = 0; i < numRawLightmaps; i++ )
2742         {
2743                 /* get lightmap */
2744                 lm = &rawLightmaps[ sortLightmaps[ i ] ];
2745
2746                 /* walk lightmaps */
2747                 for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
2748                 {
2749                         /* get twin */
2750                         lm2 = lm->twins[ lightmapNum ];
2751                         if( lm2 == NULL )
2752                                 continue;
2753                         lightmapNum2 = lm->twinNums[ lightmapNum ];
2754
2755                         /* find output lightmap from twin */
2756                         lm->outLightmapNums[ lightmapNum ] = lm2->outLightmapNums[ lightmapNum2 ];
2757                         lm->lightmapX[ lightmapNum ] = lm2->lightmapX[ lightmapNum2 ];
2758                         lm->lightmapY[ lightmapNum ] = lm2->lightmapY[ lightmapNum2 ];
2759                 }
2760         }
2761
2762         /* -----------------------------------------------------------------
2763            store output lightmaps
2764            ----------------------------------------------------------------- */
2765
2766         /* note it */
2767         Sys_FPrintf( SYS_VRB, "storing..." );
2768
2769         /* count the bsp lightmaps and allocate space */
2770         if( bspLightBytes != NULL )
2771                 free( bspLightBytes );
2772         if( numBSPLightmaps == 0 || externalLightmaps )
2773         {
2774                 numBSPLightBytes = 0;
2775                 bspLightBytes = NULL;
2776         }
2777         else
2778         {
2779                 numBSPLightBytes = (numBSPLightmaps * game->lightmapSize * game->lightmapSize * 3);
2780                 bspLightBytes = safe_malloc( numBSPLightBytes );
2781                 memset( bspLightBytes, 0, numBSPLightBytes );
2782         }
2783
2784         /* walk the list of output lightmaps */
2785         for( i = 0; i < numOutLightmaps; i++ )
2786         {
2787                 /* get output lightmap */
2788                 olm = &outLightmaps[ i ];
2789
2790                 /* is this a valid bsp lightmap? */
2791                 if( olm->lightmapNum >= 0 && !externalLightmaps )
2792                 {
2793                         /* copy lighting data */
2794                         lb = bspLightBytes + (olm->lightmapNum * game->lightmapSize * game->lightmapSize * 3);
2795                         memcpy( lb, olm->bspLightBytes, game->lightmapSize * game->lightmapSize * 3 );
2796
2797                         /* copy direction data */
2798                         if( deluxemap )
2799                         {
2800                                 lb = bspLightBytes + ((olm->lightmapNum + 1) * game->lightmapSize * game->lightmapSize * 3);
2801                                 memcpy( lb, olm->bspDirBytes, game->lightmapSize * game->lightmapSize * 3 );
2802                         }
2803                 }
2804
2805                 /* external lightmap? */
2806                 if( olm->lightmapNum < 0 || olm->extLightmapNum >= 0 || externalLightmaps )
2807                 {
2808                         /* make a directory for the lightmaps */
2809                         Q_mkdir( dirname );
2810
2811                         /* set external lightmap number */
2812                         olm->extLightmapNum = numExtLightmaps;
2813
2814                         /* write lightmap */
2815                         sprintf( filename, "%s/" EXTERNAL_LIGHTMAP, dirname, numExtLightmaps );
2816                         Sys_FPrintf( SYS_VRB, "\nwriting %s", filename );
2817                         WriteTGA24( filename, olm->bspLightBytes, olm->customWidth, olm->customHeight, qtrue );
2818                         numExtLightmaps++;
2819
2820                         /* write deluxemap */
2821                         if( deluxemap )
2822                         {
2823                                 sprintf( filename, "%s/" EXTERNAL_LIGHTMAP, dirname, numExtLightmaps );
2824                                 Sys_FPrintf( SYS_VRB, "\nwriting %s", filename );
2825                                 WriteTGA24( filename, olm->bspDirBytes, olm->customWidth, olm->customHeight, qtrue );
2826                                 numExtLightmaps++;
2827
2828                                 if( debugDeluxemap )
2829                                         olm->extLightmapNum++;
2830                         }
2831                 }
2832         }
2833
2834         if( numExtLightmaps > 0 )
2835                 Sys_FPrintf( SYS_VRB, "\n" );
2836
2837         /* delete unused external lightmaps */
2838         for( i = numExtLightmaps; i; i++ )
2839         {
2840                 /* determine if file exists */
2841                 sprintf( filename, "%s/" EXTERNAL_LIGHTMAP, dirname, i );
2842                 if( !FileExists( filename ) )
2843                         break;
2844
2845                 /* delete it */
2846                 remove( filename );
2847         }
2848
2849         /* -----------------------------------------------------------------
2850            project the lightmaps onto the bsp surfaces
2851            ----------------------------------------------------------------- */
2852
2853         /* note it */
2854         Sys_FPrintf( SYS_VRB, "projecting..." );
2855
2856         /* walk the list of surfaces */
2857         for( i = 0; i < numBSPDrawSurfaces; i++ )
2858         {
2859                 /* get the surface and info */
2860                 ds = &bspDrawSurfaces[ i ];
2861                 info = &surfaceInfos[ i ];
2862                 lm = info->lm;
2863                 olm = NULL;
2864
2865                 /* handle surfaces with identical parent */
2866                 if( info->parentSurfaceNum >= 0 )
2867                 {
2868                         /* preserve original data and get parent */
2869                         parent = &bspDrawSurfaces[ info->parentSurfaceNum ];
2870                         memcpy( &dsTemp, ds, sizeof( *ds ) );
2871
2872                         /* overwrite child with parent data */
2873                         memcpy( ds, parent, sizeof( *ds ) );
2874
2875                         /* restore key parts */
2876                         ds->fogNum = dsTemp.fogNum;
2877                         ds->firstVert = dsTemp.firstVert;
2878                         ds->firstIndex = dsTemp.firstIndex;
2879                         memcpy( ds->lightmapVecs, dsTemp.lightmapVecs, sizeof( dsTemp.lightmapVecs ) );
2880
2881                         /* set vertex data */
2882                         dv = &bspDrawVerts[ ds->firstVert ];
2883                         dvParent = &bspDrawVerts[ parent->firstVert ];
2884                         for( j = 0; j < ds->numVerts; j++ )
2885                         {
2886                                 memcpy( dv[ j ].lightmap, dvParent[ j ].lightmap, sizeof( dv[ j ].lightmap ) );
2887                                 memcpy( dv[ j ].color, dvParent[ j ].color, sizeof( dv[ j ].color ) );
2888                         }
2889
2890                         /* skip the rest */
2891                         continue;
2892                 }
2893
2894                 /* handle vertex lit or approximated surfaces */
2895                 else if( lm == NULL || lm->outLightmapNums[ 0 ] < 0 )
2896                 {
2897                         for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
2898                         {
2899                                 ds->lightmapNum[ lightmapNum ] = -3;
2900                                 ds->lightmapStyles[ lightmapNum ] = ds->vertexStyles[ lightmapNum ];
2901                         }
2902                 }
2903
2904                 /* handle lightmapped surfaces */
2905                 else
2906                 {
2907                         /* walk lightmaps */
2908                         for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
2909                         {
2910                                 /* set style */
2911                                 ds->lightmapStyles[ lightmapNum ] = lm->styles[ lightmapNum ];
2912
2913                                 /* handle unused style */
2914                                 if( lm->styles[ lightmapNum ] == LS_NONE || lm->outLightmapNums[ lightmapNum ] < 0 )
2915                                 {
2916                                         ds->lightmapNum[ lightmapNum ] = -3;
2917                                         continue;
2918                                 }
2919
2920                                 /* get output lightmap */
2921                                 olm = &outLightmaps[ lm->outLightmapNums[ lightmapNum ] ];
2922
2923                                 /* set bsp lightmap number */
2924                                 ds->lightmapNum[ lightmapNum ] = olm->lightmapNum;
2925
2926                                 /* deluxemap debugging makes the deluxemap visible */
2927                                 if( deluxemap && debugDeluxemap && lightmapNum == 0 )
2928                                         ds->lightmapNum[ lightmapNum ]++;
2929
2930                                 /* calc lightmap origin in texture space */
2931                                 lmx = (float) lm->lightmapX[ lightmapNum ] / (float) olm->customWidth;
2932                                 lmy = (float) lm->lightmapY[ lightmapNum ] / (float) olm->customHeight;
2933
2934                                 /* calc lightmap st coords */
2935                                 dv = &bspDrawVerts[ ds->firstVert ];
2936                                 ydv = &yDrawVerts[ ds->firstVert ];
2937                                 for( j = 0; j < ds->numVerts; j++ )
2938                                 {
2939                                         if( lm->solid[ lightmapNum ] )
2940                                         {
2941                                                 dv[ j ].lightmap[ lightmapNum ][ 0 ] = lmx + (0.5f / (float) olm->customWidth);
2942                                                 dv[ j ].lightmap[ lightmapNum ][ 1 ] = lmy + (0.5f / (float) olm->customWidth);
2943                                         }
2944                                         else
2945                                         {
2946                                                 dv[ j ].lightmap[ lightmapNum ][ 0 ] = lmx + (ydv[ j ].lightmap[ 0 ][ 0 ] / (superSample * olm->customWidth));
2947                                                 dv[ j ].lightmap[ lightmapNum ][ 1 ] = lmy + (ydv[ j ].lightmap[ 0 ][ 1 ] / (superSample * olm->customHeight));
2948                                         }
2949                                 }
2950                         }
2951                 }
2952
2953                 /* store vertex colors */
2954                 dv = &bspDrawVerts[ ds->firstVert ];
2955                 for( j = 0; j < ds->numVerts; j++ )
2956                 {
2957                         /* walk lightmaps */
2958                         for( lightmapNum = 0; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
2959                         {
2960                                 /* handle unused style */
2961                                 if( ds->vertexStyles[ lightmapNum ] == LS_NONE )
2962                                         VectorClear( color );
2963                                 else
2964                                 {
2965                                         /* get vertex color */
2966                                         luxel = VERTEX_LUXEL( lightmapNum, ds->firstVert + j );
2967                                         VectorCopy( luxel, color );
2968
2969                                         /* set minimum light */
2970                                         if( lightmapNum == 0 )
2971                                         {
2972                                                 for( k = 0; k < 3; k++ )
2973                                                         if( color[ k ] < minVertexLight[ k ] )
2974                                                                 color[ k ] = minVertexLight[ k ];
2975                                         }
2976                                 }
2977
2978                                 /* store to bytes */
2979                                 if( !info->si->noVertexLight )
2980                                         ColorToBytes( color, dv[ j ].color[ lightmapNum ], info->si->vertexScale );
2981                         }
2982                 }
2983
2984                 /* surfaces with styled lightmaps and a style marker get a custom generated shader (fixme: make this work with external lightmaps) */
2985                 if( olm != NULL && lm != NULL && lm->styles[ 1 ] != LS_NONE && game->load != LoadRBSPFile )     //%     info->si->styleMarker > 0 )
2986                 {
2987                         qboolean        dfEqual;
2988                         char            key[ 32 ], styleStage[ 512 ], styleStages[ 4096 ], rgbGen[ 128 ], alphaGen[ 128 ];
2989
2990
2991                         /* setup */
2992                         sprintf( styleStages, "\n\t// Q3Map2 custom lightstyle stage(s)\n" );
2993                         dv = &bspDrawVerts[ ds->firstVert ];
2994
2995                         /* depthFunc equal? */
2996                         if( info->si->styleMarker == 2 || info->si->implicitMap == IM_MASKED )
2997                                 dfEqual = qtrue;
2998                         else
2999                                 dfEqual = qfalse;
3000
3001                         /* generate stages for styled lightmaps */
3002                         for( lightmapNum = 1; lightmapNum < MAX_LIGHTMAPS; lightmapNum++ )
3003                         {
3004                                 /* early out */
3005                                 style = lm->styles[ lightmapNum ];
3006                                 if( style == LS_NONE || lm->outLightmapNums[ lightmapNum ] < 0 )
3007                                         continue;
3008
3009                                 /* get output lightmap */
3010                                 olm = &outLightmaps[ lm->outLightmapNums[ lightmapNum ] ];
3011
3012                                 /* lightmap name */
3013                                 if( lm->outLightmapNums[ lightmapNum ] == lm->outLightmapNums[ 0 ] )
3014                                         strcpy( lightmapName, "$lightmap" );
3015                                 else
3016                                         sprintf( lightmapName, "maps/%s/" EXTERNAL_LIGHTMAP, mapName, olm->extLightmapNum );
3017
3018                                 /* get rgbgen string */
3019                                 if( rgbGenValues[ style ] == NULL )
3020                                 {
3021                                         sprintf( key, "_style%drgbgen", style );
3022                                         rgbGenValues[ style ] = (char*) ValueForKey( &entities[ 0 ], key );
3023                                         if( rgbGenValues[ style ][ 0 ] == '\0' )
3024                                                 rgbGenValues[ style ] = "wave noise 0.5 1 0 5.37";
3025                                 }
3026                                 rgbGen[ 0 ] = '\0';
3027                                 if( rgbGenValues[ style ][ 0 ] != '\0' )
3028                                         sprintf( rgbGen, "\t\trgbGen %s // style %d\n", rgbGenValues[ style ], style );
3029                                 else
3030                                         rgbGen[ 0 ] = '\0';
3031
3032                                 /* get alphagen string */
3033                                 if( alphaGenValues[ style ] == NULL )
3034                                 {
3035                                         sprintf( key, "_style%dalphagen", style );
3036                                         alphaGenValues[ style ] = (char*) ValueForKey( &entities[ 0 ], key );
3037                                 }
3038                                 if( alphaGenValues[ style ][ 0 ] != '\0' )
3039                                         sprintf( alphaGen, "\t\talphaGen %s // style %d\n", alphaGenValues[ style ], style );
3040                                 else
3041                                         alphaGen[ 0 ] = '\0';
3042
3043                                 /* calculate st offset */
3044                                 lmx = dv[ 0 ].lightmap[ lightmapNum ][ 0 ] - dv[ 0 ].lightmap[ 0 ][ 0 ];
3045                                 lmy = dv[ 0 ].lightmap[ lightmapNum ][ 1 ] - dv[ 0 ].lightmap[ 0 ][ 1 ];
3046
3047                                 /* create additional stage */
3048                                 if( lmx == 0.0f && lmy == 0.0f )
3049                                 {
3050                                         sprintf( styleStage,    "\t{\n"
3051                                                                                         "\t\tmap %s\n"                                                                          /* lightmap */
3052                                                                                         "\t\tblendFunc GL_SRC_ALPHA GL_ONE\n"
3053                                                                                         "%s"                                                                                            /* depthFunc equal */
3054                                                                                         "%s"                                                                                            /* rgbGen */
3055                                                                                         "%s"                                                                                            /* alphaGen */
3056                                                                                         "\t\ttcGen lightmap\n"
3057                                                                                         "\t}\n",
3058                                                 lightmapName,
3059                                                 (dfEqual ? "\t\tdepthFunc equal\n" : ""),
3060                                                 rgbGen,
3061                                                 alphaGen );
3062                                 }
3063                                 else
3064                                 {
3065                                         sprintf( styleStage,    "\t{\n"
3066                                                                                         "\t\tmap %s\n"                                                                          /* lightmap */
3067                                                                                         "\t\tblendFunc GL_SRC_ALPHA GL_ONE\n"
3068                                                                                         "%s"                                                                                            /* depthFunc equal */
3069                                                                                         "%s"                                                                                            /* rgbGen */
3070                                                                                         "%s"                                                                                            /* alphaGen */
3071                                                                                         "\t\ttcGen lightmap\n"
3072                                                                                         "\t\ttcMod transform 1 0 0 1 %1.5f %1.5f\n"                     /* st offset */
3073                                                                                         "\t}\n",
3074                                                 lightmapName,
3075                                                 (dfEqual ? "\t\tdepthFunc equal\n" : ""),
3076                                                 rgbGen,
3077                                                 alphaGen,
3078                                                 lmx, lmy );
3079
3080                                 }
3081
3082                                 /* concatenate */
3083                                 strcat( styleStages, styleStage );
3084                         }
3085
3086                         /* create custom shader */
3087                         if( info->si->styleMarker == 2 )
3088                                 csi = CustomShader( info->si, "q3map_styleMarker2", styleStages );
3089                         else
3090                                 csi = CustomShader( info->si, "q3map_styleMarker", styleStages );
3091
3092                         /* emit remap command */
3093                         //%     EmitVertexRemapShader( csi->shader, info->si->shader );
3094
3095                         /* store it */
3096                         //%     Sys_Printf( "Emitting: %s (%d", csi->shader, strlen( csi->shader ) );
3097                         ds->shaderNum = EmitShader( csi->shader, &bspShaders[ ds->shaderNum ].contentFlags, &bspShaders[ ds->shaderNum ].surfaceFlags );
3098                         //%     Sys_Printf( ")\n" );
3099                 }
3100
3101                 /* devise a custom shader for this surface (fixme: make this work with light styles) */
3102                 else if( olm != NULL && lm != NULL && !externalLightmaps &&
3103                         (olm->customWidth != game->lightmapSize || olm->customHeight != game->lightmapSize) )
3104                 {
3105                         /* get output lightmap */
3106                         olm = &outLightmaps[ lm->outLightmapNums[ 0 ] ];
3107
3108                         /* do some name mangling */
3109                         sprintf( lightmapName, "maps/%s/" EXTERNAL_LIGHTMAP, mapName, olm->extLightmapNum );
3110
3111                         /* create custom shader */
3112                         csi = CustomShader( info->si, "$lightmap", lightmapName );
3113
3114                         /* store it */
3115                         //%     Sys_Printf( "Emitting: %s (%d", csi->shader, strlen( csi->shader ) );
3116                         ds->shaderNum = EmitShader( csi->shader, &bspShaders[ ds->shaderNum ].contentFlags, &bspShaders[ ds->shaderNum ].surfaceFlags );
3117                         //%     Sys_Printf( ")\n" );
3118                 }
3119
3120                 /* use the normal plain-jane shader */
3121                 else
3122                         ds->shaderNum = EmitShader( info->si->shader, &bspShaders[ ds->shaderNum ].contentFlags, &bspShaders[ ds->shaderNum ].surfaceFlags );
3123         }
3124
3125         /* finish */
3126         Sys_FPrintf( SYS_VRB, "done.\n" );
3127
3128         /* calc num stored */
3129         numStored = numBSPLightBytes / 3;
3130         efficiency = (numStored <= 0)
3131                 ? 0
3132                 : (float) numUsed / (float) numStored;
3133
3134         /* print stats */
3135         Sys_Printf( "%9d luxels used\n", numUsed );
3136         Sys_Printf( "%9d luxels stored (%3.2f percent efficiency)\n", numStored, efficiency * 100.0f );
3137         Sys_Printf( "%9d solid surface lightmaps\n", numSolidLightmaps );
3138         Sys_Printf( "%9d identical surface lightmaps, using %d luxels\n", numTwins, numTwinLuxels );
3139         Sys_Printf( "%9d vertex forced surfaces\n", numSurfsVertexForced );
3140         Sys_Printf( "%9d vertex approximated surfaces\n", numSurfsVertexApproximated );
3141         Sys_Printf( "%9d BSP lightmaps\n", numBSPLightmaps );
3142         Sys_Printf( "%9d total lightmaps\n", numOutLightmaps );
3143         Sys_Printf( "%9d unique lightmap/shader combinations\n", numLightmapShaders );
3144
3145         /* write map shader file */
3146         WriteMapShaderFile();
3147 }
3148
3149
3150
3151