speed clamping: sideways friction < 0 clamps against minimum possible backwards speed...
[divverent/darkplaces.git] / cl_input.c
1 /*
2 Copyright (C) 1996-1997 Id Software, Inc.
3
4 This program is free software; you can redistribute it and/or
5 modify it under the terms of the GNU General Public License
6 as published by the Free Software Foundation; either version 2
7 of the License, or (at your option) any later version.
8
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
12
13 See the GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
18
19 */
20 // cl.input.c  -- builds an intended movement command to send to the server
21
22 // Quake is a trademark of Id Software, Inc., (c) 1996 Id Software, Inc. All
23 // rights reserved.
24
25 #include "quakedef.h"
26 #include "csprogs.h"
27
28 /*
29 ===============================================================================
30
31 KEY BUTTONS
32
33 Continuous button event tracking is complicated by the fact that two different
34 input sources (say, mouse button 1 and the control key) can both press the
35 same button, but the button should only be released when both of the
36 pressing key have been released.
37
38 When a key event issues a button command (+forward, +attack, etc), it appends
39 its key number as a parameter to the command so it can be matched up with
40 the release.
41
42 state bit 0 is the current state of the key
43 state bit 1 is edge triggered on the up to down transition
44 state bit 2 is edge triggered on the down to up transition
45
46 ===============================================================================
47 */
48
49
50 kbutton_t       in_mlook, in_klook;
51 kbutton_t       in_left, in_right, in_forward, in_back;
52 kbutton_t       in_lookup, in_lookdown, in_moveleft, in_moveright;
53 kbutton_t       in_strafe, in_speed, in_jump, in_attack, in_use;
54 kbutton_t       in_up, in_down;
55 // LordHavoc: added 6 new buttons
56 kbutton_t       in_button3, in_button4, in_button5, in_button6, in_button7, in_button8;
57 //even more
58 kbutton_t       in_button9, in_button10, in_button11, in_button12, in_button13, in_button14, in_button15, in_button16;
59
60 int                     in_impulse;
61
62
63
64 void KeyDown (kbutton_t *b)
65 {
66         int k;
67         const char *c;
68
69         c = Cmd_Argv(1);
70         if (c[0])
71                 k = atoi(c);
72         else
73                 k = -1;         // typed manually at the console for continuous down
74
75         if (k == b->down[0] || k == b->down[1])
76                 return;         // repeating key
77
78         if (!b->down[0])
79                 b->down[0] = k;
80         else if (!b->down[1])
81                 b->down[1] = k;
82         else
83         {
84                 Con_Print("Three keys down for a button!\n");
85                 return;
86         }
87
88         if (b->state & 1)
89                 return;         // still down
90         b->state |= 1 + 2;      // down + impulse down
91 }
92
93 void KeyUp (kbutton_t *b)
94 {
95         int k;
96         const char *c;
97
98         c = Cmd_Argv(1);
99         if (c[0])
100                 k = atoi(c);
101         else
102         { // typed manually at the console, assume for unsticking, so clear all
103                 b->down[0] = b->down[1] = 0;
104                 b->state = 4;   // impulse up
105                 return;
106         }
107
108         if (b->down[0] == k)
109                 b->down[0] = 0;
110         else if (b->down[1] == k)
111                 b->down[1] = 0;
112         else
113                 return;         // key up without coresponding down (menu pass through)
114         if (b->down[0] || b->down[1])
115                 return;         // some other key is still holding it down
116
117         if (!(b->state & 1))
118                 return;         // still up (this should not happen)
119         b->state &= ~1;         // now up
120         b->state |= 4;          // impulse up
121 }
122
123 void IN_KLookDown (void) {KeyDown(&in_klook);}
124 void IN_KLookUp (void) {KeyUp(&in_klook);}
125 void IN_MLookDown (void) {KeyDown(&in_mlook);}
126 void IN_MLookUp (void)
127 {
128         KeyUp(&in_mlook);
129         if ( !(in_mlook.state&1) && lookspring.value)
130                 V_StartPitchDrift();
131 }
132 void IN_UpDown(void) {KeyDown(&in_up);}
133 void IN_UpUp(void) {KeyUp(&in_up);}
134 void IN_DownDown(void) {KeyDown(&in_down);}
135 void IN_DownUp(void) {KeyUp(&in_down);}
136 void IN_LeftDown(void) {KeyDown(&in_left);}
137 void IN_LeftUp(void) {KeyUp(&in_left);}
138 void IN_RightDown(void) {KeyDown(&in_right);}
139 void IN_RightUp(void) {KeyUp(&in_right);}
140 void IN_ForwardDown(void) {KeyDown(&in_forward);}
141 void IN_ForwardUp(void) {KeyUp(&in_forward);}
142 void IN_BackDown(void) {KeyDown(&in_back);}
143 void IN_BackUp(void) {KeyUp(&in_back);}
144 void IN_LookupDown(void) {KeyDown(&in_lookup);}
145 void IN_LookupUp(void) {KeyUp(&in_lookup);}
146 void IN_LookdownDown(void) {KeyDown(&in_lookdown);}
147 void IN_LookdownUp(void) {KeyUp(&in_lookdown);}
148 void IN_MoveleftDown(void) {KeyDown(&in_moveleft);}
149 void IN_MoveleftUp(void) {KeyUp(&in_moveleft);}
150 void IN_MoverightDown(void) {KeyDown(&in_moveright);}
151 void IN_MoverightUp(void) {KeyUp(&in_moveright);}
152
153 void IN_SpeedDown(void) {KeyDown(&in_speed);}
154 void IN_SpeedUp(void) {KeyUp(&in_speed);}
155 void IN_StrafeDown(void) {KeyDown(&in_strafe);}
156 void IN_StrafeUp(void) {KeyUp(&in_strafe);}
157
158 void IN_AttackDown(void) {KeyDown(&in_attack);}
159 void IN_AttackUp(void) {KeyUp(&in_attack);}
160
161 void IN_UseDown(void) {KeyDown(&in_use);}
162 void IN_UseUp(void) {KeyUp(&in_use);}
163
164 // LordHavoc: added 6 new buttons
165 void IN_Button3Down(void) {KeyDown(&in_button3);}
166 void IN_Button3Up(void) {KeyUp(&in_button3);}
167 void IN_Button4Down(void) {KeyDown(&in_button4);}
168 void IN_Button4Up(void) {KeyUp(&in_button4);}
169 void IN_Button5Down(void) {KeyDown(&in_button5);}
170 void IN_Button5Up(void) {KeyUp(&in_button5);}
171 void IN_Button6Down(void) {KeyDown(&in_button6);}
172 void IN_Button6Up(void) {KeyUp(&in_button6);}
173 void IN_Button7Down(void) {KeyDown(&in_button7);}
174 void IN_Button7Up(void) {KeyUp(&in_button7);}
175 void IN_Button8Down(void) {KeyDown(&in_button8);}
176 void IN_Button8Up(void) {KeyUp(&in_button8);}
177
178 void IN_Button9Down(void) {KeyDown(&in_button9);}
179 void IN_Button9Up(void) {KeyUp(&in_button9);}
180 void IN_Button10Down(void) {KeyDown(&in_button10);}
181 void IN_Button10Up(void) {KeyUp(&in_button10);}
182 void IN_Button11Down(void) {KeyDown(&in_button11);}
183 void IN_Button11Up(void) {KeyUp(&in_button11);}
184 void IN_Button12Down(void) {KeyDown(&in_button12);}
185 void IN_Button12Up(void) {KeyUp(&in_button12);}
186 void IN_Button13Down(void) {KeyDown(&in_button13);}
187 void IN_Button13Up(void) {KeyUp(&in_button13);}
188 void IN_Button14Down(void) {KeyDown(&in_button14);}
189 void IN_Button14Up(void) {KeyUp(&in_button14);}
190 void IN_Button15Down(void) {KeyDown(&in_button15);}
191 void IN_Button15Up(void) {KeyUp(&in_button15);}
192 void IN_Button16Down(void) {KeyDown(&in_button16);}
193 void IN_Button16Up(void) {KeyUp(&in_button16);}
194
195 void IN_JumpDown (void) {KeyDown(&in_jump);}
196 void IN_JumpUp (void) {KeyUp(&in_jump);}
197
198 void IN_Impulse (void) {in_impulse=atoi(Cmd_Argv(1));}
199
200 in_bestweapon_info_t in_bestweapon_info[IN_BESTWEAPON_MAX];
201
202 void IN_BestWeapon_Register(const char *name, int impulse, int weaponbit, int activeweaponcode, int ammostat, int ammomin)
203 {
204         int i;
205         for(i = 0; i < IN_BESTWEAPON_MAX && in_bestweapon_info[i].impulse; ++i)
206                 if(in_bestweapon_info[i].impulse == impulse)
207                         break;
208         if(i >= IN_BESTWEAPON_MAX)
209         {
210                 Con_Printf("no slot left for weapon definition; increase IN_BESTWEAPON_MAX\n");
211                 return; // sorry
212         }
213         strlcpy(in_bestweapon_info[i].name, name, sizeof(in_bestweapon_info[i].name));
214         in_bestweapon_info[i].impulse = impulse;
215         if(weaponbit != -1)
216                 in_bestweapon_info[i].weaponbit = weaponbit;
217         if(activeweaponcode != -1)
218                 in_bestweapon_info[i].activeweaponcode = activeweaponcode;
219         if(ammostat != -1)
220                 in_bestweapon_info[i].ammostat = ammostat;
221         if(ammomin != -1)
222                 in_bestweapon_info[i].ammomin = ammomin;
223 }
224
225 void IN_BestWeapon_ResetData (void)
226 {
227         memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
228         IN_BestWeapon_Register("1", 1, IT_AXE, IT_AXE, STAT_SHELLS, 0);
229         IN_BestWeapon_Register("2", 2, IT_SHOTGUN, IT_SHOTGUN, STAT_SHELLS, 1);
230         IN_BestWeapon_Register("3", 3, IT_SUPER_SHOTGUN, IT_SUPER_SHOTGUN, STAT_SHELLS, 1);
231         IN_BestWeapon_Register("4", 4, IT_NAILGUN, IT_NAILGUN, STAT_NAILS, 1);
232         IN_BestWeapon_Register("5", 5, IT_SUPER_NAILGUN, IT_SUPER_NAILGUN, STAT_NAILS, 1);
233         IN_BestWeapon_Register("6", 6, IT_GRENADE_LAUNCHER, IT_GRENADE_LAUNCHER, STAT_ROCKETS, 1);
234         IN_BestWeapon_Register("7", 7, IT_ROCKET_LAUNCHER, IT_ROCKET_LAUNCHER, STAT_ROCKETS, 1);
235         IN_BestWeapon_Register("8", 8, IT_LIGHTNING, IT_LIGHTNING, STAT_CELLS, 1);
236         IN_BestWeapon_Register("9", 9, 128, 128, STAT_CELLS, 1); // generic energy weapon for mods
237         IN_BestWeapon_Register("p", 209, 128, 128, STAT_CELLS, 1); // dpmod plasma gun
238         IN_BestWeapon_Register("w", 210, 8388608, 8388608, STAT_CELLS, 1); // dpmod plasma wave cannon
239         IN_BestWeapon_Register("l", 225, HIT_LASER_CANNON, HIT_LASER_CANNON, STAT_CELLS, 1); // hipnotic laser cannon
240         IN_BestWeapon_Register("h", 226, HIT_MJOLNIR, HIT_MJOLNIR, STAT_CELLS, 0); // hipnotic mjolnir hammer
241 }
242
243 void IN_BestWeapon_Register_f (void)
244 {
245         if(Cmd_Argc() == 7)
246         {
247                 IN_BestWeapon_Register(
248                         Cmd_Argv(1),
249                         atoi(Cmd_Argv(2)),
250                         atoi(Cmd_Argv(3)),
251                         atoi(Cmd_Argv(4)),
252                         atoi(Cmd_Argv(5)),
253                         atoi(Cmd_Argv(6))
254                 );
255         }
256         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "clear"))
257         {
258                 memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
259         }
260         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "quake"))
261         {
262                 IN_BestWeapon_ResetData();
263         }
264         else
265         {
266                 Con_Printf("Usage: %s weaponshortname impulse itemcode activeweaponcode ammostat ammomin; %s clear; %s quake\n", Cmd_Argv(0), Cmd_Argv(0), Cmd_Argv(0));
267         }
268 }
269
270 void IN_BestWeapon (void)
271 {
272         int i, n;
273         const char *t;
274         if (Cmd_Argc() < 2)
275         {
276                 Con_Printf("bestweapon requires 1 or more parameters\n");
277                 return;
278         }
279         for (i = 1;i < Cmd_Argc();i++)
280         {
281                 t = Cmd_Argv(i);
282                 // figure out which weapon this character refers to
283                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
284                 {
285                         if (!strcmp(in_bestweapon_info[n].name, t))
286                         {
287                                 // we found out what weapon this character refers to
288                                 // check if the inventory contains the weapon and enough ammo
289                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
290                                 {
291                                         // we found one of the weapons the player wanted
292                                         // send an impulse to switch to it
293                                         in_impulse = in_bestweapon_info[n].impulse;
294                                         return;
295                                 }
296                                 break;
297                         }
298                 }
299                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
300         }
301         // if we couldn't find any of the weapons, there's nothing more we can do...
302 }
303
304 #if 0
305 void IN_CycleWeapon (void)
306 {
307         int i, n;
308         int first = -1;
309         qboolean found = false;
310         const char *t;
311         if (Cmd_Argc() < 2)
312         {
313                 Con_Printf("bestweapon requires 1 or more parameters\n");
314                 return;
315         }
316         for (i = 1;i < Cmd_Argc();i++)
317         {
318                 t = Cmd_Argv(i);
319                 // figure out which weapon this character refers to
320                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
321                 {
322                         if (!strcmp(in_bestweapon_info[n].name, t))
323                         {
324                                 // we found out what weapon this character refers to
325                                 // check if the inventory contains the weapon and enough ammo
326                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
327                                 {
328                                         // we found one of the weapons the player wanted
329                                         if(first == -1)
330                                                 first = n;
331                                         if(found)
332                                         {
333                                                 in_impulse = in_bestweapon_info[n].impulse;
334                                                 return;
335                                         }
336                                         if(cl.stats[STAT_ACTIVEWEAPON] == in_bestweapon_info[n].activeweaponcode)
337                                                 found = true;
338                                 }
339                                 break;
340                         }
341                 }
342                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
343         }
344         if(first != -1)
345         {
346                 in_impulse = in_bestweapon_info[first].impulse;
347                 return;
348         }
349         // if we couldn't find any of the weapons, there's nothing more we can do...
350 }
351 #endif
352
353 /*
354 ===============
355 CL_KeyState
356
357 Returns 0.25 if a key was pressed and released during the frame,
358 0.5 if it was pressed and held
359 0 if held then released, and
360 1.0 if held for the entire time
361 ===============
362 */
363 float CL_KeyState (kbutton_t *key)
364 {
365         float           val;
366         qboolean        impulsedown, impulseup, down;
367
368         impulsedown = (key->state & 2) != 0;
369         impulseup = (key->state & 4) != 0;
370         down = (key->state & 1) != 0;
371         val = 0;
372
373         if (impulsedown && !impulseup)
374         {
375                 if (down)
376                         val = 0.5;      // pressed and held this frame
377                 else
378                         val = 0;        //      I_Error ();
379         }
380         if (impulseup && !impulsedown)
381         {
382                 if (down)
383                         val = 0;        //      I_Error ();
384                 else
385                         val = 0;        // released this frame
386         }
387         if (!impulsedown && !impulseup)
388         {
389                 if (down)
390                         val = 1.0;      // held the entire frame
391                 else
392                         val = 0;        // up the entire frame
393         }
394         if (impulsedown && impulseup)
395         {
396                 if (down)
397                         val = 0.75;     // released and re-pressed this frame
398                 else
399                         val = 0.25;     // pressed and released this frame
400         }
401
402         key->state &= 1;                // clear impulses
403
404         return val;
405 }
406
407
408
409
410 //==========================================================================
411
412 cvar_t cl_upspeed = {CVAR_SAVE, "cl_upspeed","400","vertical movement speed (while swimming or flying)"};
413 cvar_t cl_forwardspeed = {CVAR_SAVE, "cl_forwardspeed","400","forward movement speed"};
414 cvar_t cl_backspeed = {CVAR_SAVE, "cl_backspeed","400","backward movement speed"};
415 cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
416
417 cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
418 cvar_t cl_movecliptokeyboard = {0, "cl_movecliptokeyboard", "0", "if set to 1, any move is clipped to the nine keyboard states; if set to 2, only the direction is clipped, not the amount"};
419
420 cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
421 cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
422
423 cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
424
425 cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
426 cvar_t cl_movement_nettimeout = {CVAR_SAVE, "cl_movement_nettimeout", "0.3", "stops predicting moves when server is lagging badly (avoids major performance problems), timeout in seconds"};
427 cvar_t cl_movement_minping = {CVAR_SAVE, "cl_movement_minping", "0", "whether to use prediction when ping is lower than this value in milliseconds"};
428 cvar_t cl_movement_track_canjump = {CVAR_SAVE, "cl_movement_track_canjump", "1", "track if the player released the jump key between two jumps to decide if he is able to jump or not; when off, this causes some \"sliding\" slightly above the floor when the jump key is held too long; if the mod allows repeated jumping by holding space all the time, this has to be set to zero too"};
429 cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
430 cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
431 cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
432 cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
433 cvar_t cl_movement_wallfriction = {0, "cl_movement_wallfriction", "1", "how fast you slow down while sliding along a wall (should match sv_wallfriction)"};
434 cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_waterfriction), if less than 0 the cl_movement_friction variable is used instead"};
435 cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "1", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
436 cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
437 cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
438 cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
439 cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in water (should match sv_wateraccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
440 cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
441 cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (reduces speed gain when zigzagging) (should match sv_airaccel_qw); when < 0, the speed is clamped against the maximum allowed forward speed after the move"};
442 cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction); when < 0, only so much friction is applied that braking (by accelerating backwards) cannot be stronger"};
443
444 cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"};
445 cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"};
446
447 cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
448 cvar_t m_accelerate = {CVAR_SAVE, "m_accelerate","1", "mouse acceleration factor (try 2)"};
449 cvar_t m_accelerate_minspeed = {CVAR_SAVE, "m_accelerate_minspeed","5000", "below this speed, no acceleration is done"};
450 cvar_t m_accelerate_maxspeed = {CVAR_SAVE, "m_accelerate_maxspeed","10000", "above this speed, full acceleration is done"};
451 cvar_t m_accelerate_filter = {CVAR_SAVE, "m_accelerate_filter","0.1", "mouse acceleration factor filtering"};
452
453 cvar_t cl_netfps = {CVAR_SAVE, "cl_netfps","20", "how many input packets to send to server each second"};
454 cvar_t cl_netrepeatinput = {CVAR_SAVE, "cl_netrepeatinput", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 and later servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
455 cvar_t cl_netimmediatebuttons = {CVAR_SAVE, "cl_netimmediatebuttons", "1", "sends extra packets whenever your buttons change or an impulse is used (basically: whenever you click fire or change weapon)"};
456
457 cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
458
459 extern cvar_t v_flipped;
460
461 /*
462 ================
463 CL_AdjustAngles
464
465 Moves the local angle positions
466 ================
467 */
468 void CL_AdjustAngles (void)
469 {
470         float   speed;
471         float   up, down;
472
473         if (in_speed.state & 1)
474                 speed = cl.realframetime * cl_anglespeedkey.value;
475         else
476                 speed = cl.realframetime;
477
478         if (!(in_strafe.state & 1))
479         {
480                 cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
481                 cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
482         }
483         if (in_klook.state & 1)
484         {
485                 V_StopPitchDrift ();
486                 cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
487                 cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
488         }
489
490         up = CL_KeyState (&in_lookup);
491         down = CL_KeyState(&in_lookdown);
492
493         cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
494         cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;
495
496         if (up || down)
497                 V_StopPitchDrift ();
498
499         cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
500         cl.viewangles[PITCH] = ANGLEMOD(cl.viewangles[PITCH]);
501         if (cl.viewangles[YAW] >= 180)
502                 cl.viewangles[YAW] -= 360;
503         if (cl.viewangles[PITCH] >= 180)
504                 cl.viewangles[PITCH] -= 360;
505         cl.viewangles[PITCH] = bound(in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
506         cl.viewangles[ROLL] = bound(-180, cl.viewangles[ROLL], 180);
507 }
508
509 int cl_ignoremousemoves = 2;
510
511 /*
512 ================
513 CL_Input
514
515 Send the intended movement message to the server
516 ================
517 */
518 void CL_Input (void)
519 {
520         float mx, my;
521         static float old_mouse_x = 0, old_mouse_y = 0;
522
523         // clamp before the move to prevent starting with bad angles
524         CL_AdjustAngles ();
525
526         if(v_flipped.integer)
527                 cl.viewangles[YAW] = -cl.viewangles[YAW];
528
529         // reset some of the command fields
530         cl.cmd.forwardmove = 0;
531         cl.cmd.sidemove = 0;
532         cl.cmd.upmove = 0;
533
534         // get basic movement from keyboard
535         if (in_strafe.state & 1)
536         {
537                 cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
538                 cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
539         }
540
541         cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
542         cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
543
544         cl.cmd.upmove += cl_upspeed.value * CL_KeyState (&in_up);
545         cl.cmd.upmove -= cl_upspeed.value * CL_KeyState (&in_down);
546
547         if (! (in_klook.state & 1) )
548         {
549                 cl.cmd.forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
550                 cl.cmd.forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
551         }
552
553         // adjust for speed key
554         if (in_speed.state & 1)
555         {
556                 cl.cmd.forwardmove *= cl_movespeedkey.value;
557                 cl.cmd.sidemove *= cl_movespeedkey.value;
558                 cl.cmd.upmove *= cl_movespeedkey.value;
559         }
560
561         // allow mice or other external controllers to add to the move
562         IN_Move ();
563
564         // apply m_accelerate if it is on
565         if(m_accelerate.value > 1)
566         {
567                 static float averagespeed = 0;
568                 float speed, f, mi, ma;
569
570                 speed = sqrt(in_mouse_x * in_mouse_x + in_mouse_y * in_mouse_y) / cl.realframetime;
571                 if(m_accelerate_filter.value > 0)
572                         f = bound(0, cl.realframetime / m_accelerate_filter.value, 1);
573                 else
574                         f = 1;
575                 averagespeed = speed * f + averagespeed * (1 - f);
576
577                 mi = max(1, m_accelerate_minspeed.value);
578                 ma = max(m_accelerate_minspeed.value + 1, m_accelerate_maxspeed.value);
579
580                 if(averagespeed <= mi)
581                 {
582                         f = 1;
583                 }
584                 else if(averagespeed >= ma)
585                 {
586                         f = m_accelerate.value;
587                 }
588                 else
589                 {
590                         /*
591                         f = log(averagespeed);
592                         mi = log(mi);
593                         ma = log(ma);
594                         */
595                         f = averagespeed;
596                         mi = mi;
597                         ma = ma;
598                         f = (f - mi) / (ma - mi) * (m_accelerate.value - 1) + 1;
599                 }
600
601                 in_mouse_x *= f;
602                 in_mouse_y *= f;
603         }
604
605         // apply m_filter if it is on
606         mx = in_mouse_x;
607         my = in_mouse_y;
608         if (m_filter.integer)
609         {
610                 in_mouse_x = (mx + old_mouse_x) * 0.5;
611                 in_mouse_y = (my + old_mouse_y) * 0.5;
612         }
613         old_mouse_x = mx;
614         old_mouse_y = my;
615
616         // ignore a mouse move if mouse was activated/deactivated this frame
617         if (cl_ignoremousemoves)
618         {
619                 cl_ignoremousemoves--;
620                 in_mouse_x = old_mouse_x = 0;
621                 in_mouse_y = old_mouse_y = 0;
622         }
623
624         // if not in menu, apply mouse move to viewangles/movement
625         if (!key_consoleactive && key_dest == key_game && !cl.csqc_wantsmousemove)
626         {
627                 float modulatedsensitivity = sensitivity.value * cl.sensitivityscale;
628                 if (cl_prydoncursor.integer)
629                 {
630                         // mouse interacting with the scene, mostly stationary view
631                         V_StopPitchDrift();
632                         cl.cmd.cursor_screen[0] += in_mouse_x * modulatedsensitivity / vid.width;
633                         cl.cmd.cursor_screen[1] += in_mouse_y * modulatedsensitivity / vid.height;
634                 }
635                 else if (in_strafe.state & 1)
636                 {
637                         // strafing mode, all looking is movement
638                         V_StopPitchDrift();
639                         cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
640                         if (noclip_anglehack)
641                                 cl.cmd.upmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
642                         else
643                                 cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
644                 }
645                 else if ((in_mlook.state & 1) || freelook.integer)
646                 {
647                         // mouselook, lookstrafe causes turning to become strafing
648                         V_StopPitchDrift();
649                         if (lookstrafe.integer)
650                                 cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
651                         else
652                                 cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
653                         cl.viewangles[PITCH] += m_pitch.value * in_mouse_y * modulatedsensitivity * cl.viewzoom;
654                 }
655                 else
656                 {
657                         // non-mouselook, yaw turning and forward/back movement
658                         cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
659                         cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
660                 }
661         }
662         else // don't pitch drift when csqc is controlling the mouse
663                 V_StopPitchDrift();
664
665         if(v_flipped.integer)
666         {
667                 cl.viewangles[YAW] = -cl.viewangles[YAW];
668                 cl.cmd.sidemove = -cl.cmd.sidemove;
669         }
670
671         // clamp after the move to prevent rendering with bad angles
672         CL_AdjustAngles ();
673
674         if(cl_movecliptokeyboard.integer)
675         {
676                 vec_t f = 1;
677                 if (in_speed.state & 1)
678                         f *= cl_movespeedkey.value;
679                 if(cl_movecliptokeyboard.integer == 2)
680                 {
681                         // digital direction, analog amount
682                         vec_t wishvel_x, wishvel_y;
683                         f *= max(cl_sidespeed.value, max(cl_forwardspeed.value, cl_backspeed.value));
684                         wishvel_x = fabs(cl.cmd.forwardmove);
685                         wishvel_y = fabs(cl.cmd.sidemove);
686                         if(wishvel_x != 0 && wishvel_y != 0 && wishvel_x != wishvel_y)
687                         {
688                                 vec_t wishspeed = sqrt(wishvel_x * wishvel_x + wishvel_y * wishvel_y);
689                                 if(wishvel_x >= 2 * wishvel_y)
690                                 {
691                                         // pure X motion
692                                         if(cl.cmd.forwardmove > 0)
693                                                 cl.cmd.forwardmove = wishspeed;
694                                         else
695                                                 cl.cmd.forwardmove = -wishspeed;
696                                         cl.cmd.sidemove = 0;
697                                 }
698                                 else if(wishvel_y >= 2 * wishvel_x)
699                                 {
700                                         // pure Y motion
701                                         cl.cmd.forwardmove = 0;
702                                         if(cl.cmd.sidemove > 0)
703                                                 cl.cmd.sidemove = wishspeed;
704                                         else
705                                                 cl.cmd.sidemove = -wishspeed;
706                                 }
707                                 else
708                                 {
709                                         // diagonal
710                                         if(cl.cmd.forwardmove > 0)
711                                                 cl.cmd.forwardmove = 0.70710678118654752440 * wishspeed;
712                                         else
713                                                 cl.cmd.forwardmove = -0.70710678118654752440 * wishspeed;
714                                         if(cl.cmd.sidemove > 0)
715                                                 cl.cmd.sidemove = 0.70710678118654752440 * wishspeed;
716                                         else
717                                                 cl.cmd.sidemove = -0.70710678118654752440 * wishspeed;
718                                 }
719                         }
720                 }
721                 else if(cl_movecliptokeyboard.integer)
722                 {
723                         // digital direction, digital amount
724                         if(cl.cmd.sidemove >= cl_sidespeed.value * f * 0.5)
725                                 cl.cmd.sidemove = cl_sidespeed.value * f;
726                         else if(cl.cmd.sidemove <= -cl_sidespeed.value * f * 0.5)
727                                 cl.cmd.sidemove = -cl_sidespeed.value * f;
728                         else
729                                 cl.cmd.sidemove = 0;
730                         if(cl.cmd.forwardmove >= cl_forwardspeed.value * f * 0.5)
731                                 cl.cmd.forwardmove = cl_forwardspeed.value * f;
732                         else if(cl.cmd.forwardmove <= -cl_backspeed.value * f * 0.5)
733                                 cl.cmd.forwardmove = -cl_backspeed.value * f;
734                         else
735                                 cl.cmd.forwardmove = 0;
736                 }
737         }
738 }
739
740 #include "cl_collision.h"
741
742 void CL_UpdatePrydonCursor(void)
743 {
744         vec3_t temp;
745
746         if (!cl_prydoncursor.integer)
747                 VectorClear(cl.cmd.cursor_screen);
748
749         /*
750         if (cl.cmd.cursor_screen[0] < -1)
751         {
752                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - -1) * vid.width * sensitivity.value * cl.viewzoom;
753                 cl.cmd.cursor_screen[0] = -1;
754         }
755         if (cl.cmd.cursor_screen[0] > 1)
756         {
757                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - 1) * vid.width * sensitivity.value * cl.viewzoom;
758                 cl.cmd.cursor_screen[0] = 1;
759         }
760         if (cl.cmd.cursor_screen[1] < -1)
761         {
762                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - -1) * vid.height * sensitivity.value * cl.viewzoom;
763                 cl.cmd.cursor_screen[1] = -1;
764         }
765         if (cl.cmd.cursor_screen[1] > 1)
766         {
767                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - 1) * vid.height * sensitivity.value * cl.viewzoom;
768                 cl.cmd.cursor_screen[1] = 1;
769         }
770         */
771         cl.cmd.cursor_screen[0] = bound(-1, cl.cmd.cursor_screen[0], 1);
772         cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
773         cl.cmd.cursor_screen[2] = 1;
774
775         // calculate current view matrix
776         Matrix4x4_OriginFromMatrix(&r_refdef.view.matrix, cl.cmd.cursor_start);
777         // calculate direction vector of cursor in viewspace by using frustum slopes
778         VectorSet(temp, cl.cmd.cursor_screen[2] * 1000000, (v_flipped.integer ? -1 : 1) * cl.cmd.cursor_screen[0] * -r_refdef.view.frustum_x * 1000000, cl.cmd.cursor_screen[1] * -r_refdef.view.frustum_y * 1000000);
779         Matrix4x4_Transform(&r_refdef.view.matrix, temp, cl.cmd.cursor_end);
780         // trace from view origin to the cursor
781         cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
782 }
783
784 typedef enum waterlevel_e
785 {
786         WATERLEVEL_NONE,
787         WATERLEVEL_WETFEET,
788         WATERLEVEL_SWIMMING,
789         WATERLEVEL_SUBMERGED
790 }
791 waterlevel_t;
792
793 typedef struct cl_clientmovement_state_s
794 {
795         // position
796         vec3_t origin;
797         vec3_t velocity;
798         // current bounding box (different if crouched vs standing)
799         vec3_t mins;
800         vec3_t maxs;
801         // currently on the ground
802         qboolean onground;
803         // currently crouching
804         qboolean crouched;
805         // what kind of water (SUPERCONTENTS_LAVA for instance)
806         int watertype;
807         // how deep
808         waterlevel_t waterlevel;
809         // weird hacks when jumping out of water
810         // (this is in seconds and counts down to 0)
811         float waterjumptime;
812
813         // user command
814         usercmd_t cmd;
815 }
816 cl_clientmovement_state_t;
817
818 #define NUMOFFSETS 27
819 static vec3_t offsets[NUMOFFSETS] =
820 {
821 // 1 no nudge (just return the original if this test passes)
822         { 0.000,  0.000,  0.000},
823 // 6 simple nudges
824         { 0.000,  0.000,  0.125}, { 0.000,  0.000, -0.125},
825         {-0.125,  0.000,  0.000}, { 0.125,  0.000,  0.000},
826         { 0.000, -0.125,  0.000}, { 0.000,  0.125,  0.000},
827 // 4 diagonal flat nudges
828         {-0.125, -0.125,  0.000}, { 0.125, -0.125,  0.000},
829         {-0.125,  0.125,  0.000}, { 0.125,  0.125,  0.000},
830 // 8 diagonal upward nudges
831         {-0.125,  0.000,  0.125}, { 0.125,  0.000,  0.125},
832         { 0.000, -0.125,  0.125}, { 0.000,  0.125,  0.125},
833         {-0.125, -0.125,  0.125}, { 0.125, -0.125,  0.125},
834         {-0.125,  0.125,  0.125}, { 0.125,  0.125,  0.125},
835 // 8 diagonal downward nudges
836         {-0.125,  0.000, -0.125}, { 0.125,  0.000, -0.125},
837         { 0.000, -0.125, -0.125}, { 0.000,  0.125, -0.125},
838         {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
839         {-0.125,  0.125, -0.125}, { 0.125,  0.125, -0.125},
840 };
841
842 qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
843 {
844         int i;
845         vec3_t neworigin;
846         for (i = 0;i < NUMOFFSETS;i++)
847         {
848                 VectorAdd(offsets[i], s->origin, neworigin);
849                 if (!CL_TraceBox(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
850                 {
851                         VectorCopy(neworigin, s->origin);
852                         return true;
853                 }
854         }
855         // if all offsets failed, give up
856         return false;
857 }
858
859 void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
860 {
861         vec3_t origin1, origin2;
862         trace_t trace;
863
864         // make sure player is not stuck
865         CL_ClientMovement_Unstick(s);
866
867         // set crouched
868         if (s->cmd.crouch)
869         {
870                 // wants to crouch, this always works..
871                 if (!s->crouched)
872                         s->crouched = true;
873         }
874         else
875         {
876                 // wants to stand, if currently crouching we need to check for a
877                 // low ceiling first
878                 if (s->crouched)
879                 {
880                         trace = CL_TraceBox(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
881                         if (!trace.startsolid)
882                                 s->crouched = false;
883                 }
884         }
885         if (s->crouched)
886         {
887                 VectorCopy(cl.playercrouchmins, s->mins);
888                 VectorCopy(cl.playercrouchmaxs, s->maxs);
889         }
890         else
891         {
892                 VectorCopy(cl.playerstandmins, s->mins);
893                 VectorCopy(cl.playerstandmaxs, s->maxs);
894         }
895
896         // set onground
897         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
898         VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 1); // -2 causes clientside doublejump bug at above 150fps, raising that to 300fps :)
899         trace = CL_TraceBox(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
900         s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
901
902         // set watertype/waterlevel
903         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
904         s->waterlevel = WATERLEVEL_NONE;
905         s->watertype = CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
906         if (s->watertype)
907         {
908                 s->waterlevel = WATERLEVEL_WETFEET;
909                 origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
910                 if (CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
911                 {
912                         s->waterlevel = WATERLEVEL_SWIMMING;
913                         origin1[2] = s->origin[2] + 22;
914                         if (CL_TracePoint(origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
915                                 s->waterlevel = WATERLEVEL_SUBMERGED;
916                 }
917         }
918
919         // water jump prediction
920         if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
921                 s->waterjumptime = 0;
922 }
923
924 void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
925 {
926         int bump;
927         double t;
928         vec_t f;
929         vec3_t neworigin;
930         vec3_t currentorigin2;
931         vec3_t neworigin2;
932         vec3_t primalvelocity;
933         trace_t trace;
934         trace_t trace2;
935         trace_t trace3;
936         CL_ClientMovement_UpdateStatus(s);
937         VectorCopy(s->velocity, primalvelocity);
938         for (bump = 0, t = s->cmd.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
939         {
940                 VectorMA(s->origin, t, s->velocity, neworigin);
941                 trace = CL_TraceBox(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
942                 if (trace.fraction < 1 && trace.plane.normal[2] == 0)
943                 {
944                         // may be a step or wall, try stepping up
945                         // first move forward at a higher level
946                         VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + cl.movevars_stepheight);
947                         VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + cl.movevars_stepheight);
948                         trace2 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
949                         if (!trace2.startsolid)
950                         {
951                                 // then move down from there
952                                 VectorCopy(trace2.endpos, currentorigin2);
953                                 VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
954                                 trace3 = CL_TraceBox(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
955                                 //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
956                                 // accept the new trace if it made some progress
957                                 if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
958                                 {
959                                         trace = trace2;
960                                         VectorCopy(trace3.endpos, trace.endpos);
961                                 }
962                         }
963                 }
964
965                 // check if it moved at all
966                 if (trace.fraction >= 0.001)
967                         VectorCopy(trace.endpos, s->origin);
968
969                 // check if it moved all the way
970                 if (trace.fraction == 1)
971                         break;
972
973                 //if (trace.plane.normal[2] > 0.7)
974                 //      s->onground = true;
975
976                 t -= t * trace.fraction;
977
978                 f = DotProduct(s->velocity, trace.plane.normal);
979                 VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
980         }
981         if (s->waterjumptime > 0)
982                 VectorCopy(primalvelocity, s->velocity);
983 }
984
985
986 void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
987 {
988         vec_t wishspeed;
989         vec_t f;
990         vec3_t wishvel;
991         vec3_t wishdir;
992
993         // water jump only in certain situations
994         // this mimics quakeworld code
995         if (s->cmd.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
996         {
997                 vec3_t forward;
998                 vec3_t yawangles;
999                 vec3_t spot;
1000                 VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1001                 AngleVectors(yawangles, forward, NULL, NULL);
1002                 VectorMA(s->origin, 24, forward, spot);
1003                 spot[2] += 8;
1004                 if (CL_TracePoint(spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
1005                 {
1006                         spot[2] += 24;
1007                         if (!CL_TracePoint(spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
1008                         {
1009                                 VectorScale(forward, 50, s->velocity);
1010                                 s->velocity[2] = 310;
1011                                 s->waterjumptime = 2;
1012                                 s->onground = false;
1013                                 s->cmd.canjump = false;
1014                         }
1015                 }
1016         }
1017
1018         if (!(s->cmd.forwardmove*s->cmd.forwardmove + s->cmd.sidemove*s->cmd.sidemove + s->cmd.upmove*s->cmd.upmove))
1019         {
1020                 // drift towards bottom
1021                 VectorSet(wishvel, 0, 0, -60);
1022         }
1023         else
1024         {
1025                 // swim
1026                 vec3_t forward;
1027                 vec3_t right;
1028                 vec3_t up;
1029                 // calculate movement vector
1030                 AngleVectors(s->cmd.viewangles, forward, right, up);
1031                 VectorSet(up, 0, 0, 1);
1032                 VectorMAMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, s->cmd.upmove, up, wishvel);
1033         }
1034
1035         // split wishvel into wishspeed and wishdir
1036         wishspeed = VectorLength(wishvel);
1037         if (wishspeed)
1038                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1039         else
1040                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1041         wishspeed = min(wishspeed, cl.movevars_maxspeed) * 0.7;
1042
1043         if (s->crouched)
1044                 wishspeed *= 0.5;
1045
1046         if (s->waterjumptime <= 0)
1047         {
1048                 // water friction
1049                 f = 1 - s->cmd.frametime * cl.movevars_waterfriction * (cls.protocol == PROTOCOL_QUAKEWORLD ? s->waterlevel : 1);
1050                 f = bound(0, f, 1);
1051                 VectorScale(s->velocity, f, s->velocity);
1052
1053                 // water acceleration
1054                 f = wishspeed - DotProduct(s->velocity, wishdir);
1055                 if (f > 0)
1056                 {
1057                         f = min(cl.movevars_wateraccelerate * s->cmd.frametime * wishspeed, f);
1058                         VectorMA(s->velocity, f, wishdir, s->velocity);
1059                 }
1060
1061                 // holding jump button swims upward slowly
1062                 if (s->cmd.jump)
1063                 {
1064                         if (s->watertype & SUPERCONTENTS_LAVA)
1065                                 s->velocity[2] =  50;
1066                         else if (s->watertype & SUPERCONTENTS_SLIME)
1067                                 s->velocity[2] =  80;
1068                         else
1069                         {
1070                                 if (gamemode == GAME_NEXUIZ)
1071                                         s->velocity[2] = 200;
1072                                 else
1073                                         s->velocity[2] = 100;
1074                         }
1075                 }
1076         }
1077
1078         CL_ClientMovement_Move(s);
1079 }
1080
1081 void CL_ClientMovement_Physics_CPM_PM_Aircontrol(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1082 {
1083         vec_t zspeed, speed, dot, k;
1084
1085         if(s->cmd.forwardmove == 0 || s->cmd.sidemove != 0)
1086                 return;
1087         
1088         zspeed = s->velocity[2];
1089         s->velocity[2] = 0;
1090         speed = VectorNormalizeLength(s->velocity);
1091
1092         dot = DotProduct(s->velocity, wishdir);
1093         k = 32;
1094         k *= cl.movevars_aircontrol*dot*dot*s->cmd.frametime;
1095
1096         if(dot > 0) { // we can't change direction while slowing down
1097                 VectorMAM(speed, s->velocity, k, wishdir, s->velocity);
1098                 VectorNormalize(s->velocity);
1099         }
1100
1101         VectorScale(s->velocity, speed, s->velocity);
1102         s->velocity[2] = zspeed;
1103 }
1104
1105 void CL_ClientMovement_Physics_PM_Accelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed, vec_t wishspeed0, vec_t accel, vec_t accelqw, vec_t sidefric)
1106 {
1107         vec_t vel_straight;
1108         vec_t vel_z;
1109         vec3_t vel_perpend;
1110         vec_t step;
1111         vec3_t vel_xy;
1112         vec_t vel_xy_current;
1113         vec_t vel_xy_backward, vel_xy_forward;
1114         qboolean speedclamp;
1115
1116         speedclamp = (accelqw < 0);
1117         if(speedclamp)
1118                 accelqw = -accelqw;
1119
1120         if(cl.moveflags & MOVEFLAG_Q2AIRACCELERATE)
1121                 wishspeed0 = wishspeed; // don't need to emulate this Q1 bug
1122
1123         vel_straight = DotProduct(s->velocity, wishdir);
1124         vel_z = s->velocity[2];
1125         VectorCopy(s->velocity, vel_xy); vel_xy[2] -= vel_z;
1126         VectorMA(vel_xy, -vel_straight, wishdir, vel_perpend);
1127
1128         step = accel * s->cmd.frametime * wishspeed0;
1129
1130         vel_xy_current  = VectorLength(vel_xy);
1131         vel_xy_forward  = vel_xy_current + bound(0, wishspeed - vel_xy_current, step) * accelqw + step * (1 - accelqw);
1132         vel_xy_backward = vel_xy_current - bound(0, wishspeed + vel_xy_current, step) * accelqw - step * (1 - accelqw);
1133
1134         vel_straight    = vel_straight   + bound(0, wishspeed - vel_straight,   step) * accelqw + step * (1 - accelqw);
1135
1136         if(sidefric < 0 && VectorLength2(vel_perpend))
1137                 // negative: only apply so much sideways friction to stay below the speed you could get by "braking"
1138         {
1139                 vec_t f, fmin;
1140                 f = 1 - s->cmd.frametime * wishspeed * sidefric;
1141                 fmin = (vel_xy_backward*vel_xy_backward - vel_straight*vel_straight) / VectorLength2(vel_perpend);
1142                 if(fmin <= 0)
1143                         VectorScale(vel_perpend, f, vel_perpend);
1144                 else
1145                         VectorScale(vel_perpend, min(1.0f, max(fmin, f)), vel_perpend);
1146         }
1147         else
1148                 VectorScale(vel_perpend, 1 - s->cmd.frametime * wishspeed * sidefric, vel_perpend);
1149
1150         VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
1151
1152         if(speedclamp)
1153         {
1154                 vel_xy_current = min(VectorLength(s->velocity), vel_xy_forward);
1155                 if(vel_xy_current > 0) // prevent division by zero
1156                 {
1157                         VectorNormalize(s->velocity);
1158                         VectorScale(s->velocity, vel_xy_current, s->velocity);
1159                 }
1160         }
1161
1162         s->velocity[2] += vel_z;
1163 }
1164
1165 void CL_ClientMovement_Physics_PM_AirAccelerate(cl_clientmovement_state_t *s, vec3_t wishdir, vec_t wishspeed)
1166 {
1167     vec3_t curvel, wishvel, acceldir, curdir;
1168     float addspeed, accelspeed, curspeed;
1169     float dot;
1170
1171     float airforwardaccel = cl.movevars_warsowbunny_airforwardaccel;
1172     float bunnyaccel = cl.movevars_warsowbunny_accel;
1173     float bunnytopspeed = cl.movevars_warsowbunny_topspeed;
1174     float turnaccel = cl.movevars_warsowbunny_turnaccel;
1175     float backtosideratio = cl.movevars_warsowbunny_backtosideratio;
1176
1177     if( !wishspeed )
1178         return;
1179
1180     VectorCopy( s->velocity, curvel );
1181     curvel[2] = 0;
1182     curspeed = VectorLength( curvel );
1183
1184     if( wishspeed > curspeed * 1.01f )
1185     {
1186         float accelspeed = curspeed + airforwardaccel * cl.movevars_maxairspeed * s->cmd.frametime;
1187         if( accelspeed < wishspeed )
1188             wishspeed = accelspeed;
1189     }
1190     else
1191     {
1192         float f = ( bunnytopspeed - curspeed ) / ( bunnytopspeed - cl.movevars_maxairspeed );
1193         if( f < 0 )
1194             f = 0;
1195         wishspeed = max( curspeed, cl.movevars_maxairspeed ) + bunnyaccel * f * cl.movevars_maxairspeed * s->cmd.frametime;
1196     }
1197     VectorScale( wishdir, wishspeed, wishvel );
1198     VectorSubtract( wishvel, curvel, acceldir );
1199     addspeed = VectorNormalizeLength( acceldir );
1200
1201     accelspeed = turnaccel * cl.movevars_maxairspeed /* wishspeed */ * s->cmd.frametime;
1202     if( accelspeed > addspeed )
1203         accelspeed = addspeed;
1204
1205     if( backtosideratio < 1.0f )
1206     {
1207         VectorNormalize2( curvel, curdir );
1208         dot = DotProduct( acceldir, curdir );
1209         if( dot < 0 )
1210             VectorMA( acceldir, -( 1.0f - backtosideratio ) * dot, curdir, acceldir );
1211     }
1212
1213     VectorMA( s->velocity, accelspeed, acceldir, s->velocity );
1214 }
1215
1216 void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
1217 {
1218         vec_t friction;
1219         vec_t wishspeed;
1220         vec_t addspeed;
1221         vec_t accelspeed;
1222         vec_t f;
1223         vec3_t forward;
1224         vec3_t right;
1225         vec3_t up;
1226         vec3_t wishvel;
1227         vec3_t wishdir;
1228         vec3_t yawangles;
1229         trace_t trace;
1230
1231         // jump if on ground with jump button pressed but only if it has been
1232         // released at least once since the last jump
1233         if (s->cmd.jump)
1234         {
1235                 if (s->onground && (s->cmd.canjump || !cl_movement_track_canjump.integer)) // FIXME remove this cvar again when canjump logic actually works, or maybe keep it for mods that allow "pogo-ing"
1236                 {
1237                         s->velocity[2] += cl.movevars_jumpvelocity;
1238                         s->onground = false;
1239                         s->cmd.canjump = false;
1240                 }
1241         }
1242         else
1243                 s->cmd.canjump = true;
1244
1245         // calculate movement vector
1246         VectorSet(yawangles, 0, s->cmd.viewangles[1], 0);
1247         AngleVectors(yawangles, forward, right, up);
1248         VectorMAM(s->cmd.forwardmove, forward, s->cmd.sidemove, right, wishvel);
1249
1250         // split wishvel into wishspeed and wishdir
1251         wishspeed = VectorLength(wishvel);
1252         if (wishspeed)
1253                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1254         else
1255                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1256         // check if onground
1257         if (s->onground)
1258         {
1259                 wishspeed = min(wishspeed, cl.movevars_maxspeed);
1260                 if (s->crouched)
1261                         wishspeed *= 0.5;
1262
1263                 // apply edge friction
1264                 f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
1265                 if (f > 0)
1266                 {
1267                         friction = cl.movevars_friction;
1268                         if (cl.movevars_edgefriction != 1)
1269                         {
1270                                 vec3_t neworigin2;
1271                                 vec3_t neworigin3;
1272                                 // note: QW uses the full player box for the trace, and yet still
1273                                 // uses s->origin[2] + s->mins[2], which is clearly an bug, but
1274                                 // this mimics it for compatibility
1275                                 VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
1276                                 VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
1277                                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1278                                         trace = CL_TraceBox(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1279                                 else
1280                                         trace = CL_TraceLine(neworigin2, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1281                                 if (trace.fraction == 1 && !trace.startsolid)
1282                                         friction *= cl.movevars_edgefriction;
1283                         }
1284                         // apply ground friction
1285                         f = 1 - s->cmd.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
1286                         f = max(f, 0);
1287                         VectorScale(s->velocity, f, s->velocity);
1288                 }
1289                 addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1290                 if (addspeed > 0)
1291                 {
1292                         accelspeed = min(cl.movevars_accelerate * s->cmd.frametime * wishspeed, addspeed);
1293                         VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1294                 }
1295                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1296                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1297                         s->velocity[2] = 0;
1298                 if (VectorLength2(s->velocity))
1299                         CL_ClientMovement_Move(s);
1300         }
1301         else
1302         {
1303                 if (s->waterjumptime <= 0)
1304                 {
1305                         // apply air speed limit
1306                         vec_t accel, wishspeed0, wishspeed2, accelqw;
1307                         qboolean accelerating;
1308
1309                         accelqw = cl.movevars_airaccel_qw;
1310                         wishspeed0 = wishspeed;
1311                         wishspeed = min(wishspeed, cl.movevars_maxairspeed);
1312                         if (s->crouched)
1313                                 wishspeed *= 0.5;
1314                         accel = cl.movevars_airaccelerate;
1315
1316                         accelerating = (DotProduct(s->velocity, wishdir) > 0);
1317                         wishspeed2 = wishspeed;
1318
1319                         // CPM: air control
1320                         if(cl.movevars_airstopaccelerate != 0)
1321                                 if(DotProduct(s->velocity, wishdir) < 0)
1322                                         accel = cl.movevars_airstopaccelerate;
1323                         if(s->cmd.forwardmove == 0 && s->cmd.sidemove != 0)
1324                         {
1325                                 if(cl.movevars_maxairstrafespeed)
1326                                 {
1327                                         if(wishspeed > cl.movevars_maxairstrafespeed)
1328                                                 wishspeed = cl.movevars_maxairstrafespeed;
1329                                         if(cl.movevars_maxairstrafespeed < cl.movevars_maxairspeed)
1330                                                 accelqw = 1;
1331                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1332                                                 // if partially non-QW acceleration is used (as in, strafing
1333                                                 // would get faster than moving forward straight)
1334                                 }
1335                                 if(cl.movevars_airstrafeaccelerate)
1336                                 {
1337                                         accel = cl.movevars_airstrafeaccelerate;
1338                                         if(cl.movevars_airstrafeaccelerate > cl.movevars_airaccelerate)
1339                                                 accelqw = 1;
1340                                                 // otherwise, CPMA-style air acceleration misbehaves a lot
1341                                                 // if partially non-QW acceleration is used (as in, strafing
1342                                                 // would get faster than moving forward straight)
1343                                 }
1344                         }
1345                         // !CPM
1346
1347                         if(cl.movevars_warsowbunny_turnaccel && accelerating && s->cmd.sidemove == 0 && s->cmd.forwardmove != 0)
1348                                 CL_ClientMovement_Physics_PM_AirAccelerate(s, wishdir, wishspeed2);
1349                         else
1350                                 CL_ClientMovement_Physics_PM_Accelerate(s, wishdir, wishspeed, wishspeed0, accel, accelqw, cl.movevars_airaccel_sideways_friction / cl.movevars_maxairspeed);
1351
1352                         if(cl.movevars_aircontrol)
1353                                 CL_ClientMovement_Physics_CPM_PM_Aircontrol(s, wishdir, wishspeed2);
1354                 }
1355                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->cmd.frametime;
1356                 CL_ClientMovement_Move(s);
1357         }
1358 }
1359
1360 void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
1361 {
1362         //Con_Printf(" %f", frametime);
1363         if (!s->cmd.jump)
1364                 s->cmd.canjump = true;
1365         s->waterjumptime -= s->cmd.frametime;
1366         CL_ClientMovement_UpdateStatus(s);
1367         if (s->waterlevel >= WATERLEVEL_SWIMMING)
1368                 CL_ClientMovement_Physics_Swim(s);
1369         else
1370                 CL_ClientMovement_Physics_Walk(s);
1371 }
1372
1373 extern cvar_t slowmo;
1374 void CL_UpdateMoveVars(void)
1375 {
1376         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1377         {
1378                 cl.moveflags = 0;
1379         }
1380         else if (cl.stats[STAT_MOVEVARS_TICRATE])
1381         {
1382                 cl.moveflags = cl.stats[STAT_MOVEFLAGS];
1383                 cl.movevars_ticrate = cl.statsf[STAT_MOVEVARS_TICRATE];
1384                 cl.movevars_timescale = cl.statsf[STAT_MOVEVARS_TIMESCALE];
1385                 cl.movevars_gravity = cl.statsf[STAT_MOVEVARS_GRAVITY];
1386                 cl.movevars_stopspeed = cl.statsf[STAT_MOVEVARS_STOPSPEED] ;
1387                 cl.movevars_maxspeed = cl.statsf[STAT_MOVEVARS_MAXSPEED];
1388                 cl.movevars_spectatormaxspeed = cl.statsf[STAT_MOVEVARS_SPECTATORMAXSPEED];
1389                 cl.movevars_accelerate = cl.statsf[STAT_MOVEVARS_ACCELERATE];
1390                 cl.movevars_airaccelerate = cl.statsf[STAT_MOVEVARS_AIRACCELERATE];
1391                 cl.movevars_wateraccelerate = cl.statsf[STAT_MOVEVARS_WATERACCELERATE];
1392                 cl.movevars_entgravity = cl.statsf[STAT_MOVEVARS_ENTGRAVITY];
1393                 cl.movevars_jumpvelocity = cl.statsf[STAT_MOVEVARS_JUMPVELOCITY];
1394                 cl.movevars_edgefriction = cl.statsf[STAT_MOVEVARS_EDGEFRICTION];
1395                 cl.movevars_maxairspeed = cl.statsf[STAT_MOVEVARS_MAXAIRSPEED];
1396                 cl.movevars_stepheight = cl.statsf[STAT_MOVEVARS_STEPHEIGHT];
1397                 cl.movevars_airaccel_qw = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW];
1398                 cl.movevars_airaccel_sideways_friction = cl.statsf[STAT_MOVEVARS_AIRACCEL_SIDEWAYS_FRICTION];
1399                 cl.movevars_friction = cl.statsf[STAT_MOVEVARS_FRICTION];
1400                 cl.movevars_wallfriction = cl.statsf[STAT_MOVEVARS_WALLFRICTION];
1401                 cl.movevars_waterfriction = cl.statsf[STAT_MOVEVARS_WATERFRICTION];
1402                 cl.movevars_airstopaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTOPACCELERATE];
1403                 cl.movevars_airstrafeaccelerate = cl.statsf[STAT_MOVEVARS_AIRSTRAFEACCELERATE];
1404                 cl.movevars_maxairstrafespeed = cl.statsf[STAT_MOVEVARS_MAXAIRSTRAFESPEED];
1405                 cl.movevars_aircontrol = cl.statsf[STAT_MOVEVARS_AIRCONTROL];
1406                 cl.movevars_warsowbunny_airforwardaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_AIRFORWARDACCEL];
1407                 cl.movevars_warsowbunny_accel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_ACCEL];
1408                 cl.movevars_warsowbunny_topspeed = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TOPSPEED];
1409                 cl.movevars_warsowbunny_turnaccel = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_TURNACCEL];
1410                 cl.movevars_warsowbunny_backtosideratio = cl.statsf[STAT_MOVEVARS_WARSOWBUNNY_BACKTOSIDERATIO];
1411         }
1412         else
1413         {
1414                 cl.moveflags = 0;
1415                 cl.movevars_ticrate = slowmo.value / bound(1.0f, cl_netfps.value, 1000.0f);
1416                 cl.movevars_timescale = slowmo.value;
1417                 cl.movevars_gravity = sv_gravity.value;
1418                 cl.movevars_stopspeed = cl_movement_stopspeed.value;
1419                 cl.movevars_maxspeed = cl_movement_maxspeed.value;
1420                 cl.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
1421                 cl.movevars_accelerate = cl_movement_accelerate.value;
1422                 cl.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
1423                 cl.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
1424                 cl.movevars_friction = cl_movement_friction.value;
1425                 cl.movevars_wallfriction = cl_movement_wallfriction.value;
1426                 cl.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
1427                 cl.movevars_entgravity = 1;
1428                 cl.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1429                 cl.movevars_edgefriction = cl_movement_edgefriction.value;
1430                 cl.movevars_maxairspeed = cl_movement_maxairspeed.value;
1431                 cl.movevars_stepheight = cl_movement_stepheight.value;
1432                 cl.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
1433                 cl.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
1434                 cl.movevars_airstopaccelerate = 0;
1435                 cl.movevars_airstrafeaccelerate = 0;
1436                 cl.movevars_maxairstrafespeed = 0;
1437                 cl.movevars_aircontrol = 0;
1438                 cl.movevars_warsowbunny_airforwardaccel = 0;
1439                 cl.movevars_warsowbunny_accel = 0;
1440                 cl.movevars_warsowbunny_topspeed = 0;
1441                 cl.movevars_warsowbunny_turnaccel = 0;
1442                 cl.movevars_warsowbunny_backtosideratio = 0;
1443         }
1444
1445         if(!(cl.moveflags & MOVEFLAG_VALID))
1446         {
1447                 if(gamemode == GAME_NEXUIZ)
1448                         cl.moveflags = MOVEFLAG_Q2AIRACCELERATE;
1449         }
1450 }
1451
1452 void CL_ClientMovement_Replay(void)
1453 {
1454         int i;
1455         double totalmovemsec;
1456         cl_clientmovement_state_t s;
1457
1458         if (cl.movement_predicted && !cl.movement_replay)
1459                 return;
1460
1461         // set up starting state for the series of moves
1462         memset(&s, 0, sizeof(s));
1463         VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
1464         VectorCopy(cl.mvelocity[0], s.velocity);
1465         s.crouched = true; // will be updated on first move
1466         //Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
1467
1468         totalmovemsec = 0;
1469         for (i = 0;i < CL_MAX_USERCMDS;i++)
1470                 if (cl.movecmd[i].sequence > cls.servermovesequence)
1471                         totalmovemsec += cl.movecmd[i].msec;
1472         cl.movement_predicted = totalmovemsec >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
1473         //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovemsec, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
1474         if (cl.movement_predicted)
1475         {
1476                 //Con_Printf("%ims\n", cl.movecmd[0].msec);
1477
1478                 // replay the input queue to predict current location
1479                 // note: this relies on the fact there's always one queue item at the end
1480
1481                 // find how many are still valid
1482                 for (i = 0;i < CL_MAX_USERCMDS;i++)
1483                         if (cl.movecmd[i].sequence <= cls.servermovesequence)
1484                                 break;
1485                 // now walk them in oldest to newest order
1486                 for (i--;i >= 0;i--)
1487                 {
1488                         s.cmd = cl.movecmd[i];
1489                         if (i < CL_MAX_USERCMDS - 1)
1490                                 s.cmd.canjump = cl.movecmd[i+1].canjump;
1491                         // if a move is more than 50ms, do it as two moves (matching qwsv)
1492                         //Con_Printf("%i ", s.cmd.msec);
1493                         if(s.cmd.frametime > 0.0005)
1494                         {
1495                                 if (s.cmd.frametime > 0.05)
1496                                 {
1497                                         s.cmd.frametime /= 2;
1498                                         CL_ClientMovement_PlayerMove(&s);
1499                                 }
1500                                 CL_ClientMovement_PlayerMove(&s);
1501                                 cl.movecmd[i].canjump = s.cmd.canjump;
1502                         }
1503                 }
1504                 //Con_Printf("\n");
1505                 CL_ClientMovement_UpdateStatus(&s);
1506         }
1507         else
1508         {
1509                 // get the first movement queue entry to know whether to crouch and such
1510                 s.cmd = cl.movecmd[0];
1511         }
1512
1513         if (cls.demoplayback) // for bob, speedometer
1514                 VectorCopy(cl.mvelocity[0], cl.movement_velocity);
1515         else
1516         {
1517                 cl.movement_replay = false;
1518                 // update the interpolation target position and velocity
1519                 VectorCopy(s.origin, cl.movement_origin);
1520                 VectorCopy(s.velocity, cl.movement_velocity);
1521         }
1522
1523         // update the onground flag if appropriate
1524         if (cl.movement_predicted)
1525         {
1526                 // when predicted we simply set the flag according to the UpdateStatus
1527                 cl.onground = s.onground;
1528         }
1529         else
1530         {
1531                 // when not predicted, cl.onground is cleared by cl_parse.c each time
1532                 // an update packet is received, but can be forced on here to hide
1533                 // server inconsistencies in the onground flag
1534                 // (which mostly occur when stepping up stairs at very high framerates
1535                 //  where after the step up the move continues forward and not
1536                 //  downward so the ground is not detected)
1537                 //
1538                 // such onground inconsistencies can cause jittery gun bobbing and
1539                 // stair smoothing, so we set onground if UpdateStatus says so
1540                 if (s.onground)
1541                         cl.onground = true;
1542         }
1543
1544         // react to onground state changes (for gun bob)
1545         if (cl.onground)
1546         {
1547                 if (!cl.oldonground)
1548                         cl.hitgroundtime = cl.movecmd[0].time;
1549                 cl.lastongroundtime = cl.movecmd[0].time;
1550         }
1551         cl.oldonground = cl.onground;
1552 }
1553
1554 void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, usercmd_t *from, usercmd_t *to)
1555 {
1556         int bits;
1557
1558         bits = 0;
1559         if (to->viewangles[0] != from->viewangles[0])
1560                 bits |= QW_CM_ANGLE1;
1561         if (to->viewangles[1] != from->viewangles[1])
1562                 bits |= QW_CM_ANGLE2;
1563         if (to->viewangles[2] != from->viewangles[2])
1564                 bits |= QW_CM_ANGLE3;
1565         if (to->forwardmove != from->forwardmove)
1566                 bits |= QW_CM_FORWARD;
1567         if (to->sidemove != from->sidemove)
1568                 bits |= QW_CM_SIDE;
1569         if (to->upmove != from->upmove)
1570                 bits |= QW_CM_UP;
1571         if (to->buttons != from->buttons)
1572                 bits |= QW_CM_BUTTONS;
1573         if (to->impulse != from->impulse)
1574                 bits |= QW_CM_IMPULSE;
1575
1576         MSG_WriteByte(buf, bits);
1577         if (bits & QW_CM_ANGLE1)
1578                 MSG_WriteAngle16i(buf, to->viewangles[0]);
1579         if (bits & QW_CM_ANGLE2)
1580                 MSG_WriteAngle16i(buf, to->viewangles[1]);
1581         if (bits & QW_CM_ANGLE3)
1582                 MSG_WriteAngle16i(buf, to->viewangles[2]);
1583         if (bits & QW_CM_FORWARD)
1584                 MSG_WriteShort(buf, (short) to->forwardmove);
1585         if (bits & QW_CM_SIDE)
1586                 MSG_WriteShort(buf, (short) to->sidemove);
1587         if (bits & QW_CM_UP)
1588                 MSG_WriteShort(buf, (short) to->upmove);
1589         if (bits & QW_CM_BUTTONS)
1590                 MSG_WriteByte(buf, to->buttons);
1591         if (bits & QW_CM_IMPULSE)
1592                 MSG_WriteByte(buf, to->impulse);
1593         MSG_WriteByte(buf, to->msec);
1594 }
1595
1596 void CL_NewFrameReceived(int num)
1597 {
1598         if (developer_networkentities.integer >= 10)
1599                 Con_Printf("recv: svc_entities %i\n", num);
1600         cl.latestframenums[cl.latestframenumsposition] = num;
1601         cl.latestsendnums[cl.latestframenumsposition] = cl.cmd.sequence;
1602         cl.latestframenumsposition = (cl.latestframenumsposition + 1) % LATESTFRAMENUMS;
1603 }
1604
1605 /*
1606 ==============
1607 CL_SendMove
1608 ==============
1609 */
1610 usercmd_t nullcmd; // for delta compression of qw moves
1611 void CL_SendMove(void)
1612 {
1613         int i, j, packetloss;
1614         int checksumindex;
1615         int bits;
1616         int maxusercmds;
1617         usercmd_t *cmd;
1618         sizebuf_t buf;
1619         unsigned char data[1024];
1620         double packettime;
1621         int msecdelta;
1622         qboolean quemove;
1623         qboolean important;
1624
1625         // if playing a demo, do nothing
1626         if (!cls.netcon)
1627                 return;
1628
1629         // we don't que moves during a lag spike (potential network timeout)
1630         quemove = realtime - cl.last_received_message < cl_movement_nettimeout.value;
1631
1632         // we build up cl.cmd and then decide whether to send or not
1633         // we store this into cl.movecmd[0] for prediction each frame even if we
1634         // do not send, to make sure that prediction is instant
1635         cl.cmd.time = cl.time;
1636         cl.cmd.sequence = cls.netcon->outgoing_unreliable_sequence;
1637
1638         // set button bits
1639         // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
1640         bits = 0;
1641         if (in_attack.state   & 3) bits |=   1;
1642         if (in_jump.state     & 3) bits |=   2;
1643         if (in_button3.state  & 3) bits |=   4;
1644         if (in_button4.state  & 3) bits |=   8;
1645         if (in_button5.state  & 3) bits |=  16;
1646         if (in_button6.state  & 3) bits |=  32;
1647         if (in_button7.state  & 3) bits |=  64;
1648         if (in_button8.state  & 3) bits |= 128;
1649         if (in_use.state      & 3) bits |= 256;
1650         if (key_dest != key_game || key_consoleactive) bits |= 512;
1651         if (cl_prydoncursor.integer) bits |= 1024;
1652         if (in_button9.state  & 3)  bits |=   2048;
1653         if (in_button10.state  & 3) bits |=   4096;
1654         if (in_button11.state  & 3) bits |=   8192;
1655         if (in_button12.state  & 3) bits |=  16384;
1656         if (in_button13.state  & 3) bits |=  32768;
1657         if (in_button14.state  & 3) bits |=  65536;
1658         if (in_button15.state  & 3) bits |= 131072;
1659         if (in_button16.state  & 3) bits |= 262144;
1660         // button bits 19-31 unused currently
1661         // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
1662         if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
1663         if (cl.cmd.cursor_screen[0] >=  1) bits |= 16;
1664         if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
1665         if (cl.cmd.cursor_screen[1] >=  1) bits |= 64;
1666
1667         // set buttons and impulse
1668         cl.cmd.buttons = bits;
1669         cl.cmd.impulse = in_impulse;
1670
1671         // set viewangles
1672         VectorCopy(cl.viewangles, cl.cmd.viewangles);
1673
1674         msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[1].time * 1000));
1675         cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
1676         // ridiculous value rejection (matches qw)
1677         if (cl.cmd.msec > 250)
1678                 cl.cmd.msec = 100;
1679         cl.cmd.frametime = cl.cmd.msec * (1.0 / 1000.0);
1680
1681         cl.cmd.predicted = cl_movement.integer != 0;
1682
1683         // movement is set by input code (forwardmove/sidemove/upmove)
1684         // always dump the first two moves, because they may contain leftover inputs from the last level
1685         if (cl.cmd.sequence <= 2)
1686                 cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
1687
1688         cl.cmd.jump = (cl.cmd.buttons & 2) != 0;
1689         cl.cmd.crouch = 0;
1690         switch (cls.protocol)
1691         {
1692         case PROTOCOL_QUAKEWORLD:
1693         case PROTOCOL_QUAKE:
1694         case PROTOCOL_QUAKEDP:
1695         case PROTOCOL_NEHAHRAMOVIE:
1696         case PROTOCOL_NEHAHRABJP:
1697         case PROTOCOL_NEHAHRABJP2:
1698         case PROTOCOL_NEHAHRABJP3:
1699         case PROTOCOL_DARKPLACES1:
1700         case PROTOCOL_DARKPLACES2:
1701         case PROTOCOL_DARKPLACES3:
1702         case PROTOCOL_DARKPLACES4:
1703         case PROTOCOL_DARKPLACES5:
1704                 break;
1705         case PROTOCOL_DARKPLACES6:
1706         case PROTOCOL_DARKPLACES7:
1707                 // FIXME: cl.cmd.buttons & 16 is +button5, Nexuiz specific
1708                 cl.cmd.crouch = (cl.cmd.buttons & 16) != 0;
1709                 break;
1710         case PROTOCOL_UNKNOWN:
1711                 break;
1712         }
1713
1714         if (quemove)
1715                 cl.movecmd[0] = cl.cmd;
1716
1717         // don't predict more than 200fps
1718         if (realtime >= cl.lastpackettime + 0.005)
1719                 cl.movement_replay = true; // redo the prediction
1720
1721         // now decide whether to actually send this move
1722         // (otherwise it is only for prediction)
1723
1724         // don't send too often or else network connections can get clogged by a
1725         // high renderer framerate
1726         packettime = 1.0 / bound(1, cl_netfps.value, 1000);
1727         if (cl.movevars_timescale && cl.movevars_ticrate)
1728         {
1729                 float maxtic = cl.movevars_ticrate / cl.movevars_timescale;
1730                 packettime = min(packettime, maxtic);
1731         }
1732
1733         // do not send 0ms packets because they mess up physics
1734         if(cl.cmd.msec == 0 && cl.time > cl.oldtime && (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS))
1735                 return;
1736         // always send if buttons changed or an impulse is pending
1737         // even if it violates the rate limit!
1738         important = (cl.cmd.impulse || (cl_netimmediatebuttons.integer && cl.cmd.buttons != cl.movecmd[1].buttons));
1739         // don't send too often (cl_netfps)
1740         if (!important && realtime < cl.lastpackettime + packettime)
1741                 return;
1742         // don't choke the connection with packets (obey rate limit)
1743         // it is important that this check be last, because it adds a new
1744         // frame to the shownetgraph output and any cancelation after this
1745         // will produce a nasty spike-like look to the netgraph
1746         // we also still send if it is important
1747         if (!NetConn_CanSend(cls.netcon) && !important)
1748                 return;
1749         // try to round off the lastpackettime to a multiple of the packet interval
1750         // (this causes it to emit packets at a steady beat)
1751         if (packettime > 0)
1752                 cl.lastpackettime = floor(realtime / packettime) * packettime;
1753         else
1754                 cl.lastpackettime = realtime;
1755
1756         buf.maxsize = sizeof(data);
1757         buf.cursize = 0;
1758         buf.data = data;
1759
1760         // send the movement message
1761         // PROTOCOL_QUAKE        clc_move = 16 bytes total
1762         // PROTOCOL_QUAKEDP      clc_move = 16 bytes total
1763         // PROTOCOL_NEHAHRAMOVIE clc_move = 16 bytes total
1764         // PROTOCOL_DARKPLACES1  clc_move = 19 bytes total
1765         // PROTOCOL_DARKPLACES2  clc_move = 25 bytes total
1766         // PROTOCOL_DARKPLACES3  clc_move = 25 bytes total
1767         // PROTOCOL_DARKPLACES4  clc_move = 19 bytes total
1768         // PROTOCOL_DARKPLACES5  clc_move = 19 bytes total
1769         // PROTOCOL_DARKPLACES6  clc_move = 52 bytes total
1770         // PROTOCOL_DARKPLACES7  clc_move = 56 bytes total per move (can be up to 16 moves)
1771         // PROTOCOL_QUAKEWORLD   clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
1772
1773         // set prydon cursor info
1774         CL_UpdatePrydonCursor();
1775
1776         if (cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS)
1777         {
1778                 switch (cls.protocol)
1779                 {
1780                 case PROTOCOL_QUAKEWORLD:
1781                         MSG_WriteByte(&buf, qw_clc_move);
1782                         // save the position for a checksum byte
1783                         checksumindex = buf.cursize;
1784                         MSG_WriteByte(&buf, 0);
1785                         // packet loss percentage
1786                         for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
1787                                 if (cls.netcon->incoming_netgraph[j].unreliablebytes == NETGRAPH_LOSTPACKET)
1788                                         packetloss++;
1789                         packetloss = packetloss * 100 / NETGRAPH_PACKETS;
1790                         MSG_WriteByte(&buf, packetloss);
1791                         // write most recent 3 moves
1792                         QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
1793                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
1794                         QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.cmd);
1795                         // calculate the checksum
1796                         buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->outgoing_unreliable_sequence);
1797                         // if delta compression history overflows, request no delta
1798                         if (cls.netcon->outgoing_unreliable_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
1799                                 cl.qw_validsequence = 0;
1800                         // request delta compression if appropriate
1801                         if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
1802                         {
1803                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
1804                                 MSG_WriteByte(&buf, qw_clc_delta);
1805                                 MSG_WriteByte(&buf, cl.qw_validsequence & 255);
1806                         }
1807                         else
1808                                 cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = -1;
1809                         break;
1810                 case PROTOCOL_QUAKE:
1811                 case PROTOCOL_QUAKEDP:
1812                 case PROTOCOL_NEHAHRAMOVIE:
1813                 case PROTOCOL_NEHAHRABJP:
1814                 case PROTOCOL_NEHAHRABJP2:
1815                 case PROTOCOL_NEHAHRABJP3:
1816                         // 5 bytes
1817                         MSG_WriteByte (&buf, clc_move);
1818                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1819                         // 3 bytes
1820                         for (i = 0;i < 3;i++)
1821                                 MSG_WriteAngle8i (&buf, cl.cmd.viewangles[i]);
1822                         // 6 bytes
1823                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1824                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1825                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1826                         // 2 bytes
1827                         MSG_WriteByte (&buf, cl.cmd.buttons);
1828                         MSG_WriteByte (&buf, cl.cmd.impulse);
1829                         break;
1830                 case PROTOCOL_DARKPLACES2:
1831                 case PROTOCOL_DARKPLACES3:
1832                         // 5 bytes
1833                         MSG_WriteByte (&buf, clc_move);
1834                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1835                         // 12 bytes
1836                         for (i = 0;i < 3;i++)
1837                                 MSG_WriteAngle32f (&buf, cl.cmd.viewangles[i]);
1838                         // 6 bytes
1839                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1840                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1841                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1842                         // 2 bytes
1843                         MSG_WriteByte (&buf, cl.cmd.buttons);
1844                         MSG_WriteByte (&buf, cl.cmd.impulse);
1845                         break;
1846                 case PROTOCOL_DARKPLACES1:
1847                 case PROTOCOL_DARKPLACES4:
1848                 case PROTOCOL_DARKPLACES5:
1849                         // 5 bytes
1850                         MSG_WriteByte (&buf, clc_move);
1851                         MSG_WriteFloat (&buf, cl.cmd.time); // last server packet time
1852                         // 6 bytes
1853                         for (i = 0;i < 3;i++)
1854                                 MSG_WriteAngle16i (&buf, cl.cmd.viewangles[i]);
1855                         // 6 bytes
1856                         MSG_WriteCoord16i (&buf, cl.cmd.forwardmove);
1857                         MSG_WriteCoord16i (&buf, cl.cmd.sidemove);
1858                         MSG_WriteCoord16i (&buf, cl.cmd.upmove);
1859                         // 2 bytes
1860                         MSG_WriteByte (&buf, cl.cmd.buttons);
1861                         MSG_WriteByte (&buf, cl.cmd.impulse);
1862                 case PROTOCOL_DARKPLACES6:
1863                 case PROTOCOL_DARKPLACES7:
1864                         // set the maxusercmds variable to limit how many should be sent
1865                         maxusercmds = bound(1, cl_netrepeatinput.integer + 1, min(3, CL_MAX_USERCMDS));
1866                         // when movement prediction is off, there's not much point in repeating old input as it will just be ignored
1867                         if (!cl.cmd.predicted)
1868                                 maxusercmds = 1;
1869
1870                         // send the latest moves in order, the old ones will be
1871                         // ignored by the server harmlessly, however if the previous
1872                         // packets were lost these moves will be used
1873                         //
1874                         // this reduces packet loss impact on gameplay.
1875                         for (j = 0, cmd = &cl.movecmd[maxusercmds-1];j < maxusercmds;j++, cmd--)
1876                         {
1877                                 // don't repeat any stale moves
1878                                 if (cmd->sequence && cmd->sequence < cls.servermovesequence)
1879                                         continue;
1880                                 // 5/9 bytes
1881                                 MSG_WriteByte (&buf, clc_move);
1882                                 if (cls.protocol != PROTOCOL_DARKPLACES6)
1883                                         MSG_WriteLong (&buf, cmd->predicted ? cmd->sequence : 0);
1884                                 MSG_WriteFloat (&buf, cmd->time); // last server packet time
1885                                 // 6 bytes
1886                                 for (i = 0;i < 3;i++)
1887                                         MSG_WriteAngle16i (&buf, cmd->viewangles[i]);
1888                                 // 6 bytes
1889                                 MSG_WriteCoord16i (&buf, cmd->forwardmove);
1890                                 MSG_WriteCoord16i (&buf, cmd->sidemove);
1891                                 MSG_WriteCoord16i (&buf, cmd->upmove);
1892                                 // 5 bytes
1893                                 MSG_WriteLong (&buf, cmd->buttons);
1894                                 MSG_WriteByte (&buf, cmd->impulse);
1895                                 // PRYDON_CLIENTCURSOR
1896                                 // 30 bytes
1897                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[0] * 32767.0f));
1898                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[1] * 32767.0f));
1899                                 MSG_WriteFloat (&buf, cmd->cursor_start[0]);
1900                                 MSG_WriteFloat (&buf, cmd->cursor_start[1]);
1901                                 MSG_WriteFloat (&buf, cmd->cursor_start[2]);
1902                                 MSG_WriteFloat (&buf, cmd->cursor_impact[0]);
1903                                 MSG_WriteFloat (&buf, cmd->cursor_impact[1]);
1904                                 MSG_WriteFloat (&buf, cmd->cursor_impact[2]);
1905                                 MSG_WriteShort (&buf, cmd->cursor_entitynumber);
1906                         }
1907                         break;
1908                 case PROTOCOL_UNKNOWN:
1909                         break;
1910                 }
1911         }
1912
1913         if (cls.protocol != PROTOCOL_QUAKEWORLD && buf.cursize)
1914         {
1915                 // ack entity frame numbers received since the last input was sent
1916                 // (redundent to improve handling of client->server packet loss)
1917                 // if cl_netrepeatinput is 1 and client framerate matches server
1918                 // framerate, this is 10 bytes, if client framerate is lower this
1919                 // will be more...
1920                 int i, j;
1921                 int oldsequence = cl.cmd.sequence - bound(1, cl_netrepeatinput.integer + 1, 3);
1922                 if (oldsequence < 1)
1923                         oldsequence = 1;
1924                 for (i = 0;i < LATESTFRAMENUMS;i++)
1925                 {
1926                         j = (cl.latestframenumsposition + i) % LATESTFRAMENUMS;
1927                         if (cl.latestsendnums[j] >= oldsequence)
1928                         {
1929                                 if (developer_networkentities.integer >= 10)
1930                                         Con_Printf("send clc_ackframe %i\n", cl.latestframenums[j]);
1931                                 MSG_WriteByte(&buf, clc_ackframe);
1932                                 MSG_WriteLong(&buf, cl.latestframenums[j]);
1933                         }
1934                 }
1935         }
1936
1937         // PROTOCOL_DARKPLACES6 = 67 bytes per packet
1938         // PROTOCOL_DARKPLACES7 = 71 bytes per packet
1939
1940         // acknowledge any recently received data blocks
1941         for (i = 0;i < CL_MAX_DOWNLOADACKS && (cls.dp_downloadack[i].start || cls.dp_downloadack[i].size);i++)
1942         {
1943                 MSG_WriteByte(&buf, clc_ackdownloaddata);
1944                 MSG_WriteLong(&buf, cls.dp_downloadack[i].start);
1945                 MSG_WriteShort(&buf, cls.dp_downloadack[i].size);
1946                 cls.dp_downloadack[i].start = 0;
1947                 cls.dp_downloadack[i].size = 0;
1948         }
1949
1950         // send the reliable message (forwarded commands) if there is one
1951         if (buf.cursize || cls.netcon->message.cursize)
1952                 NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol, max(20*(buf.cursize+40), cl_rate.integer), false);
1953
1954         if (quemove)
1955         {
1956                 // update the cl.movecmd array which holds the most recent moves,
1957                 // because we now need a new slot for the next input
1958                 for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
1959                         cl.movecmd[i] = cl.movecmd[i-1];
1960                 cl.movecmd[0].msec = 0;
1961                 cl.movecmd[0].frametime = 0;
1962         }
1963
1964         // clear button 'click' states
1965         in_attack.state  &= ~2;
1966         in_jump.state    &= ~2;
1967         in_button3.state &= ~2;
1968         in_button4.state &= ~2;
1969         in_button5.state &= ~2;
1970         in_button6.state &= ~2;
1971         in_button7.state &= ~2;
1972         in_button8.state &= ~2;
1973         in_use.state     &= ~2;
1974         in_button9.state  &= ~2;
1975         in_button10.state &= ~2;
1976         in_button11.state &= ~2;
1977         in_button12.state &= ~2;
1978         in_button13.state &= ~2;
1979         in_button14.state &= ~2;
1980         in_button15.state &= ~2;
1981         in_button16.state &= ~2;
1982         // clear impulse
1983         in_impulse = 0;
1984
1985         if (cls.netcon->message.overflowed)
1986         {
1987                 Con_Print("CL_SendMove: lost server connection\n");
1988                 CL_Disconnect();
1989                 Host_ShutdownServer();
1990         }
1991 }
1992
1993 /*
1994 ============
1995 CL_InitInput
1996 ============
1997 */
1998 void CL_InitInput (void)
1999 {
2000         Cmd_AddCommand ("+moveup",IN_UpDown, "swim upward");
2001         Cmd_AddCommand ("-moveup",IN_UpUp, "stop swimming upward");
2002         Cmd_AddCommand ("+movedown",IN_DownDown, "swim downward");
2003         Cmd_AddCommand ("-movedown",IN_DownUp, "stop swimming downward");
2004         Cmd_AddCommand ("+left",IN_LeftDown, "turn left");
2005         Cmd_AddCommand ("-left",IN_LeftUp, "stop turning left");
2006         Cmd_AddCommand ("+right",IN_RightDown, "turn right");
2007         Cmd_AddCommand ("-right",IN_RightUp, "stop turning right");
2008         Cmd_AddCommand ("+forward",IN_ForwardDown, "move forward");
2009         Cmd_AddCommand ("-forward",IN_ForwardUp, "stop moving forward");
2010         Cmd_AddCommand ("+back",IN_BackDown, "move backward");
2011         Cmd_AddCommand ("-back",IN_BackUp, "stop moving backward");
2012         Cmd_AddCommand ("+lookup", IN_LookupDown, "look upward");
2013         Cmd_AddCommand ("-lookup", IN_LookupUp, "stop looking upward");
2014         Cmd_AddCommand ("+lookdown", IN_LookdownDown, "look downward");
2015         Cmd_AddCommand ("-lookdown", IN_LookdownUp, "stop looking downward");
2016         Cmd_AddCommand ("+strafe", IN_StrafeDown, "activate strafing mode (move instead of turn)");
2017         Cmd_AddCommand ("-strafe", IN_StrafeUp, "deactivate strafing mode");
2018         Cmd_AddCommand ("+moveleft", IN_MoveleftDown, "strafe left");
2019         Cmd_AddCommand ("-moveleft", IN_MoveleftUp, "stop strafing left");
2020         Cmd_AddCommand ("+moveright", IN_MoverightDown, "strafe right");
2021         Cmd_AddCommand ("-moveright", IN_MoverightUp, "stop strafing right");
2022         Cmd_AddCommand ("+speed", IN_SpeedDown, "activate run mode (faster movement and turning)");
2023         Cmd_AddCommand ("-speed", IN_SpeedUp, "deactivate run mode");
2024         Cmd_AddCommand ("+attack", IN_AttackDown, "begin firing");
2025         Cmd_AddCommand ("-attack", IN_AttackUp, "stop firing");
2026         Cmd_AddCommand ("+jump", IN_JumpDown, "jump");
2027         Cmd_AddCommand ("-jump", IN_JumpUp, "end jump (so you can jump again)");
2028         Cmd_AddCommand ("impulse", IN_Impulse, "send an impulse number to server (select weapon, use item, etc)");
2029         Cmd_AddCommand ("+klook", IN_KLookDown, "activate keyboard looking mode, do not recenter view");
2030         Cmd_AddCommand ("-klook", IN_KLookUp, "deactivate keyboard looking mode");
2031         Cmd_AddCommand ("+mlook", IN_MLookDown, "activate mouse looking mode, do not recenter view");
2032         Cmd_AddCommand ("-mlook", IN_MLookUp, "deactivate mouse looking mode");
2033
2034         // LordHavoc: added use button
2035         Cmd_AddCommand ("+use", IN_UseDown, "use something (may be used by some mods)");
2036         Cmd_AddCommand ("-use", IN_UseUp, "stop using something");
2037
2038         // LordHavoc: added 6 new buttons
2039         Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
2040         Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
2041         Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
2042         Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
2043         Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
2044         Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
2045         Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
2046         Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
2047         Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
2048         Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
2049         Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
2050         Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
2051         Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
2052         Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
2053         Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
2054         Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
2055         Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
2056         Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
2057         Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
2058         Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
2059         Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
2060         Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
2061         Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
2062         Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
2063         Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
2064         Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
2065         Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
2066         Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
2067
2068         // LordHavoc: added bestweapon command
2069         Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 8 7 6 5 4 3 2 1)");
2070 #if 0
2071         Cmd_AddCommand ("cycleweapon", IN_CycleWeapon, "send an impulse number to server to select the next usable weapon out of several (example: 9 4 8) if you are holding one of these, and choose the first one if you are holding none of these");
2072 #endif
2073         Cmd_AddCommand ("register_bestweapon", IN_BestWeapon_Register_f, "(for QC usage only) change weapon parameters to be used by bestweapon; stuffcmd this in ClientConnect");
2074
2075         Cvar_RegisterVariable(&cl_movecliptokeyboard);
2076         Cvar_RegisterVariable(&cl_movement);
2077         Cvar_RegisterVariable(&cl_movement_nettimeout);
2078         Cvar_RegisterVariable(&cl_movement_minping);
2079         Cvar_RegisterVariable(&cl_movement_track_canjump);
2080         Cvar_RegisterVariable(&cl_movement_maxspeed);
2081         Cvar_RegisterVariable(&cl_movement_maxairspeed);
2082         Cvar_RegisterVariable(&cl_movement_stopspeed);
2083         Cvar_RegisterVariable(&cl_movement_friction);
2084         Cvar_RegisterVariable(&cl_movement_wallfriction);
2085         Cvar_RegisterVariable(&cl_movement_waterfriction);
2086         Cvar_RegisterVariable(&cl_movement_edgefriction);
2087         Cvar_RegisterVariable(&cl_movement_stepheight);
2088         Cvar_RegisterVariable(&cl_movement_accelerate);
2089         Cvar_RegisterVariable(&cl_movement_airaccelerate);
2090         Cvar_RegisterVariable(&cl_movement_wateraccelerate);
2091         Cvar_RegisterVariable(&cl_movement_jumpvelocity);
2092         Cvar_RegisterVariable(&cl_movement_airaccel_qw);
2093         Cvar_RegisterVariable(&cl_movement_airaccel_sideways_friction);
2094
2095         Cvar_RegisterVariable(&in_pitch_min);
2096         Cvar_RegisterVariable(&in_pitch_max);
2097         Cvar_RegisterVariable(&m_filter);
2098         Cvar_RegisterVariable(&m_accelerate);
2099         Cvar_RegisterVariable(&m_accelerate_minspeed);
2100         Cvar_RegisterVariable(&m_accelerate_maxspeed);
2101         Cvar_RegisterVariable(&m_accelerate_filter);
2102
2103         Cvar_RegisterVariable(&cl_netfps);
2104         Cvar_RegisterVariable(&cl_netrepeatinput);
2105         Cvar_RegisterVariable(&cl_netimmediatebuttons);
2106
2107         Cvar_RegisterVariable(&cl_nodelta);
2108 }
2109