From 8884e16864ba53fb4b58623d7537d7ef30c28e11 Mon Sep 17 00:00:00 2001 From: Lasse Collin Date: Sun, 31 Jan 2010 23:28:51 +0200 Subject: [PATCH] Revise the Windows build files. The old Makefile + config.h was deleted, because it becomes outdated too easily and building with the Autotools based build system works fine even on Windows. windows/build.sh hasn't got much testing, but it should work to build 32-bit x86 and x86-64 versions of XZ Utils using MSYS, MinGW or MinGW-w32, and MinGW-w64. windows/INSTALL-Windows.txt describes what packages are needed and how to install them. windows/README-Windows.txt is a readme file for the binary package that build.sh hopefully builds. There are no instructions about using Autotools for now, so those using a git snapshot may want to run "autoreconf -fi && ./configure && make mydist" on a UN*X box and then copy the resulting .tar.gz to a Windows. --- windows/INSTALL-Windows.txt | 131 +++++++++++++++ windows/Makefile | 320 ------------------------------------ windows/README | 155 ----------------- windows/README-Windows.txt | 115 +++++++++++++ windows/build.sh | 189 +++++++++++++++++++++ windows/config.h | 170 ------------------- 6 files changed, 435 insertions(+), 645 deletions(-) create mode 100644 windows/INSTALL-Windows.txt delete mode 100644 windows/Makefile delete mode 100644 windows/README create mode 100644 windows/README-Windows.txt create mode 100644 windows/build.sh delete mode 100644 windows/config.h diff --git a/windows/INSTALL-Windows.txt b/windows/INSTALL-Windows.txt new file mode 100644 index 0000000..b5ac963 --- /dev/null +++ b/windows/INSTALL-Windows.txt @@ -0,0 +1,131 @@ + +Building XZ Utils on Windows +============================ + +Introduction +------------ + + This document explains shortly where to get and how to install the + build tool that are needed to build XZ Utils on Windows. The final + binary package will be standalone in sense that it will depend only + on DLLs that are included in all Windows installations. + + These instructions don't apply to Cygwin. XZ Utils can be built under + Cygwin in the same way as many other packages. + + These instructions don't apply to MinGW and MSYS developers either, + who may want to package XZ Utils for MinGW or MSYS distributions. + You know who you are, and will probably use quite different configure + options etc. than what is described here. + + +Installing the toolchain(s) +--------------------------- + + Some of the following is needed: + - MSYS is always needed to use the GNU Autotools based build system. + - MinGW builds 32-bit x86 binaries. + - MingW-w32 builds 32-bit x86 executables too. + - MinGW-w64 builds 64-bit x86-64 binaries. + + So you need to pick between MinGW and MinGW-w32 when building + 32-bit version. You don't need both. + + You might find 7-Zip handy when extracting + some files (especially the .tar.lzma files). The ready-made + build script will also use 7-Zip to create the distributable + .zip and .7z files. + + I used the following directory structure but you can use whatever + you want. Just note that I will use these in my examples. Each of + these should have a subdirectory "bin": + + C:\devel\tools\msys + C:\devel\tools\mingw + C:\devel\tools\mingw-w32 + C:\devel\tools\mingw-w64 + + +Installing MSYS + + You can download MSYS from MinGW's Sourceforge page: + + http://sourceforge.net/projects/mingw/files/ + + It's under "MSYS Base System". I recommend using MSYS 1.0.11 + (MSYS-1.0.11.exe or msysCORE-1.0.11-bin.tar.gz) because that + package includes all the required tools. At least some of the + later versions include only a subset and thus you would need to + download the rest separately. The old version will work fine for + building XZ Utils. + + You can use either the .exe or .tar.gz package. I prefer .tar.gz, + because it can be extracted into any directory and later removed + without worrying about uninstallers. + + +Installing MinGW + + You can download the required packages from MinGW's Sourceforge page: + + http://sourceforge.net/projects/mingw/files/ + + These version numbers were the latest when I wrote this document, but + you probably should pick the latest versions: + + MinGW Runtime -> mingwrt-3.17-mingw32-dev.tar.gz + MinGW API for MS-Windows -> w32api-3.14-mingw32-dev.tar.gz + GNU Binutils -> binutils-2.20-1-bin.tar.gz + GCC Version 4 -> gcc-full-4.4.0-mingw32-bin-2.tar.lzma + + The full GCC package is quite big, but if you want a smaller + download, you will need to download more than one file, so I'm + using the full package in this document for simplicity. + + Extract the packages in the above order, possibly overwriting files + from packages that were extracted earlier. + + +Installing MinGW-w32 or MinGW-w64 + + You can find the latest MinGW-w32 and MinGW-w64 builds here: + + http://sourceforge.net/projects/mingw-w64/files/ + + Locate the appropriate files: + + Toolchains targeting Win32 -> mingw-w32-*-mingw*.zip + Toolchains targeting Win64 -> mingw-w64-*-mingw*.zip + + I don't know what is the most recommended one. I used sezero's + versions from "Personal Builds", since they seemed to have + a stable GCC (judging from the GCC version number only). + + If you will install both MinGW-w32 and MinGW-w64, remember to + extract them into different directories. + + +Building XZ Utils +----------------- + + Start MSYS by going to the directory C:\devel\tools\msys and running + msys.bat there (double-click or use command prompt). It will start + at "home" directory, which is C:\devel\tools\msys\home\YourUserName. + + If you have xz-5.x.x.tar.gz in C:\devel, you should be able to build + it now with the following commands: + + cd /c/devel + tar xzf xz-5.x.x.tar.gz + cd xz-5.x.x + sh windows/build.sh + + If you used some other directory than C:\devel\tools for the build + tools, edit the variables near the beginning of build.sh first. + + If you want to build manually, read the buildit() function in + build.sh. Look especially at the latter configure invocation. + + Be patient. Running configure and other scripts used by the build + system is (very) slow under Windows. + diff --git a/windows/Makefile b/windows/Makefile deleted file mode 100644 index 73f874a..0000000 --- a/windows/Makefile +++ /dev/null @@ -1,320 +0,0 @@ -############################################################################### -# -# Makefile to build XZ Utils using MinGW -# -# Make flags to alter compilation: -# -# DEBUG=1 Enable assertions. Don't use this for production builds! -# You may also want to set CFLAGS="-g -O0" to disable -# optimizations. -# -# W64=1 Build for 64-bit Windows. Make sure that you have 64-bit -# MinGW in PATH. -# -# WINE=1 Shortcut to set CC, AR, and STRIP to use Wine to run Windows -# versions of MinGW binaries. -# -# The usual CPPFLAGS and CFLAGS are supported too. -# -############################################################################### -# -# Author: Lasse Collin -# -# This file has been put into the public domain. -# You can do whatever you want with this file. -# -############################################################################### - -ifdef W64 -MING_PFX = x86_64-w64-mingw32- -CC = $(MING_PFX)gcc -WINDRES = $(MING_PFX)windres -AR = $(MING_PFX)ar -STRIP = $(MING_PFX)strip -PKG_DIR=pkg-x64 -else -CC = mingw32-gcc -WINDRES = windres -AR = ar -STRIP = strip -PKG_DIR=pkg-x86 -endif - -SED = sed -MKDIR = mkdir -CP = cp -RM = rm -f - -CFLAGS = -g -Wall -Wextra -O2 -# CFLAGS = -Wall -Wextra -O3 -fomit-frame-pointer -funroll-loops - -ALL_CFLAGS = -std=gnu99 -mms-bitfields - -ALL_CPPFLAGS = \ - -I. \ - -I../src/common \ - -I../src/liblzma/api \ - -I../src/liblzma/common \ - -I../src/liblzma/check \ - -I../src/liblzma/rangecoder \ - -I../src/liblzma/lz \ - -I../src/liblzma/lzma \ - -I../src/liblzma/delta \ - -I../src/liblzma/simple \ - -I../src/liblzma/subblock - -ALL_CPPFLAGS += -DHAVE_CONFIG_H - -# This works with Wine too while using native GNU make, sed, and rm. -ifdef WINE -ifdef W64 -CC := wine c:/MinGW64/bin/x86_64-pc-mingw32-gcc -WINDRES := wine c:/MinGW64/bin/x86_64-pc-mingw32-windres -AR := wine c:/MinGW64/bin/x86_64-pc-mingw32-ar -STRIP := wine c:/MinGW64/bin/x86_64-pc-mingw32-strip -else -CC := wine c:/MinGW/bin/gcc -WINDRES := wine c:/MinGW/bin/windres -AR := wine c:/MinGW/bin/ar -STRIP := wine c:/MinGW/bin/strip -endif -endif - -ifdef DEBUG -# Use echo since it works for this purpose on both Windows and POSIX. -STRIP := echo Skipping strip -else -ALL_CPPFLAGS += -DNDEBUG -endif - -ALL_CPPFLAGS += $(CPPFLAGS) -ALL_CFLAGS += $(CFLAGS) - - -################ -# Common rules # -################ - -.PHONY: all clean pkg -all: liblzma xzdec xz -clean: liblzma-clean xzdec-clean xz-clean - -pkg: all - $(RM) -r $(PKG_DIR) - $(MKDIR) -p $(PKG_DIR)/lib $(PKG_DIR)/include/lzma - $(CP) liblzma.dll xz-dynamic.exe xz.exe xzdec-dynamic.exe xzdec.exe lzmadec-dynamic.exe lzmadec.exe $(PKG_DIR) - $(CP) liblzma.a liblzma.def liblzma_static.lib $(PKG_DIR)/lib - $(CP) ../src/liblzma/api/lzma.h $(PKG_DIR)/include - $(CP) ../src/liblzma/api/lzma/*.h $(PKG_DIR)/include/lzma - -%.o: %.rc - $(WINDRES) $(ALL_CPPFLAGS) $< $@ - - -############### -# liblzma.dll # -############### - -.PHONY: liblzma -liblzma: liblzma.dll liblzma_static.lib - -LIBLZMA_SRCS_C = \ - ../src/liblzma/common/alone_decoder.c \ - ../src/liblzma/common/alone_encoder.c \ - ../src/liblzma/common/auto_decoder.c \ - ../src/liblzma/common/block_buffer_decoder.c \ - ../src/liblzma/common/block_buffer_encoder.c \ - ../src/liblzma/common/block_decoder.c \ - ../src/liblzma/common/block_encoder.c \ - ../src/liblzma/common/block_header_decoder.c \ - ../src/liblzma/common/block_header_encoder.c \ - ../src/liblzma/common/block_util.c \ - ../src/liblzma/common/common.c \ - ../src/liblzma/common/easy_buffer_encoder.c \ - ../src/liblzma/common/easy_decoder_memusage.c \ - ../src/liblzma/common/easy_encoder.c \ - ../src/liblzma/common/easy_encoder_memusage.c \ - ../src/liblzma/common/easy_preset.c \ - ../src/liblzma/common/filter_buffer_decoder.c \ - ../src/liblzma/common/filter_buffer_encoder.c \ - ../src/liblzma/common/filter_common.c \ - ../src/liblzma/common/filter_decoder.c \ - ../src/liblzma/common/filter_encoder.c \ - ../src/liblzma/common/filter_flags_decoder.c \ - ../src/liblzma/common/filter_flags_encoder.c \ - ../src/liblzma/common/hardware_physmem.c \ - ../src/liblzma/common/index.c \ - ../src/liblzma/common/index_decoder.c \ - ../src/liblzma/common/index_encoder.c \ - ../src/liblzma/common/index_hash.c \ - ../src/liblzma/common/stream_buffer_decoder.c \ - ../src/liblzma/common/stream_buffer_encoder.c \ - ../src/liblzma/common/stream_decoder.c \ - ../src/liblzma/common/stream_encoder.c \ - ../src/liblzma/common/stream_flags_common.c \ - ../src/liblzma/common/stream_flags_decoder.c \ - ../src/liblzma/common/stream_flags_encoder.c \ - ../src/liblzma/common/vli_decoder.c \ - ../src/liblzma/common/vli_encoder.c \ - ../src/liblzma/common/vli_size.c \ - ../src/liblzma/check/check.c \ - ../src/liblzma/check/crc32_table.c \ - ../src/liblzma/check/crc64_table.c \ - ../src/liblzma/check/sha256.c \ - ../src/liblzma/rangecoder/price_table.c \ - ../src/liblzma/lz/lz_decoder.c \ - ../src/liblzma/lz/lz_encoder.c \ - ../src/liblzma/lz/lz_encoder_mf.c \ - ../src/liblzma/lzma/fastpos_table.c \ - ../src/liblzma/lzma/lzma2_decoder.c \ - ../src/liblzma/lzma/lzma2_encoder.c \ - ../src/liblzma/lzma/lzma_decoder.c \ - ../src/liblzma/lzma/lzma_encoder.c \ - ../src/liblzma/lzma/lzma_encoder_optimum_fast.c \ - ../src/liblzma/lzma/lzma_encoder_optimum_normal.c \ - ../src/liblzma/lzma/lzma_encoder_presets.c \ - ../src/liblzma/delta/delta_common.c \ - ../src/liblzma/delta/delta_decoder.c \ - ../src/liblzma/delta/delta_encoder.c \ - ../src/liblzma/simple/arm.c \ - ../src/liblzma/simple/armthumb.c \ - ../src/liblzma/simple/ia64.c \ - ../src/liblzma/simple/powerpc.c \ - ../src/liblzma/simple/simple_coder.c \ - ../src/liblzma/simple/simple_decoder.c \ - ../src/liblzma/simple/simple_encoder.c \ - ../src/liblzma/simple/sparc.c \ - ../src/liblzma/simple/x86.c \ - ../src/common/tuklib_physmem.c - -LIBLZMA_SRCS_ASM = - -ifdef W64 -LIBLZMA_SRCS_C += \ - ../src/liblzma/check/crc32_fast.c \ - ../src/liblzma/check/crc64_fast.c -else -LIBLZMA_SRCS_ASM += \ - ../src/liblzma/check/crc32_x86.S \ - ../src/liblzma/check/crc64_x86.S -endif - -LIBLZMA_OBJS_C = $(LIBLZMA_SRCS_C:.c=.o) -LIBLZMA_OBJS_ASM = $(LIBLZMA_SRCS_ASM:.S=.o) -LIBLZMA_OBJS = \ - $(LIBLZMA_OBJS_C) \ - $(LIBLZMA_OBJS_ASM) \ - ../src/liblzma/liblzma_w32res.o - -LIBLZMA_OBJS_STATIC_C = $(LIBLZMA_SRCS_C:.c=-static.o) -LIBLZMA_OBJS_STATIC_ASM = $(LIBLZMA_SRCS_ASM:.S=-static.o) -LIBLZMA_OBJS_STATIC = $(LIBLZMA_OBJS_STATIC_C) $(LIBLZMA_OBJS_STATIC_ASM) - -# The sed is needed to remove ordinals from the .def file. I'm not going -# to track the ordinal numbers, so people should link against liblzma.dll -# only by using symbol names. -liblzma.dll: $(LIBLZMA_OBJS) - $(CC) $(ALL_CFLAGS) -shared -o liblzma.dll $(LIBLZMA_OBJS) -Wl,--out-implib,liblzma.a,--output-def,liblzma.def.in - $(SED) 's/ \+@ *[0-9]\+//' liblzma.def.in > liblzma.def - $(RM) liblzma.def.in - $(STRIP) --strip-unneeded liblzma.a - $(STRIP) --strip-all liblzma.dll - -$(LIBLZMA_OBJS_C): %.o: %.c - $(CC) -DDLL_EXPORT $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $< - -$(LIBLZMA_OBJS_ASM): %.o: %.S - $(CC) -DDLL_EXPORT $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $< - -liblzma_static.lib: $(LIBLZMA_OBJS_STATIC) - $(RM) $@ - $(AR) rcs $@ $(LIBLZMA_OBJS_STATIC) - $(STRIP) --strip-unneeded $@ - -$(LIBLZMA_OBJS_STATIC_C): %-static.o: %.c - $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $< - -$(LIBLZMA_OBJS_STATIC_ASM): %-static.o: %.S - $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $< - -.PHONY: liblzma-clean -liblzma-clean: - -$(RM) $(LIBLZMA_OBJS) $(LIBLZMA_OBJS_STATIC) liblzma.def.in liblzma.def liblzma.a liblzma.dll liblzma_static.lib - - -########################### -# xzdec.exe & lzmadec.exe # -########################### - -.PHONY: xzdec -xzdec: xzdec-dynamic.exe lzmadec-dynamic.exe xzdec.exe lzmadec.exe - -XZDEC_SRCS = ../src/xzdec/xzdec.c \ - ../src/common/tuklib_progname.c \ - ../src/common/tuklib_exit.c - -xzdec-dynamic.exe: liblzma.dll $(XZDEC_SRCS) ../src/xzdec/xzdec_w32res.o - $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) $(XZDEC_SRCS) ../src/xzdec/xzdec_w32res.o -o $@ liblzma.a - $(STRIP) --strip-all $@ - -lzmadec-dynamic.exe: liblzma.dll $(XZDEC_SRCS) ../src/xzdec/lzmadec_w32res.o - $(CC) $(ALL_CPPFLAGS) -DLZMADEC $(ALL_CFLAGS) $(XZDEC_SRCS) ../src/xzdec/lzmadec_w32res.o -o $@ liblzma.a - $(STRIP) --strip-all $@ - -xzdec.exe: liblzma_static.lib $(XZDEC_SRCS) ../src/xzdec/xzdec_w32res.o - $(CC) -DLZMA_API_STATIC $(ALL_CPPFLAGS) $(ALL_CFLAGS) $(XZDEC_SRCS) ../src/xzdec/xzdec_w32res.o -o $@ liblzma_static.lib - $(STRIP) --strip-all $@ - -lzmadec.exe: liblzma_static.lib $(XZDEC_SRCS) ../src/xzdec/lzmadec_w32res.o - $(CC) -DLZMA_API_STATIC $(ALL_CPPFLAGS) -DLZMADEC $(ALL_CFLAGS) $(XZDEC_SRCS) ../src/xzdec/lzmadec_w32res.o -o $@ liblzma_static.lib - $(STRIP) --strip-all $@ - -.PHONY: xzdec-clean -xzdec-clean: - -$(RM) xzdec-dynamic.exe lzmadec-dynamic.exe xzdec.exe lzmadec.exe ../src/xzdec/xzdec_w32res.o ../src/xzdec/lzmadec_w32res.o - - -########## -# xz.exe # -########## - -.PHONY: xz -xz: xz-dynamic.exe xz.exe - -XZ_SRCS = \ - ../src/xz/args.c \ - ../src/xz/coder.c \ - ../src/xz/file_io.c \ - ../src/xz/hardware.c \ - ../src/xz/main.c \ - ../src/xz/message.c \ - ../src/xz/options.c \ - ../src/xz/signals.c \ - ../src/xz/suffix.c \ - ../src/xz/util.c \ - ../src/common/tuklib_open_stdxxx.c \ - ../src/common/tuklib_progname.c \ - ../src/common/tuklib_exit.c \ - ../src/common/tuklib_cpucores.c - - -XZ_OBJS = $(XZ_SRCS:.c=.o) -XZ_OBJS_STATIC = $(XZ_SRCS:.c=-static.o) - -$(XZ_OBJS): %.o: %.c - $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $< - -xz-dynamic.exe: liblzma.dll $(XZ_OBJS) ../src/xz/xz_w32res.o - $(CC) $(ALL_CFLAGS) $(XZ_OBJS) ../src/xz/xz_w32res.o -o $@ liblzma.a - $(STRIP) --strip-all $@ - -$(XZ_OBJS_STATIC): %-static.o: %.c - $(CC) -DLZMA_API_STATIC $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $< - -xz.exe: liblzma_static.lib $(XZ_OBJS_STATIC) ../src/xz/xz_w32res.o - $(CC) $(ALL_CFLAGS) $(XZ_OBJS_STATIC) ../src/xz/xz_w32res.o -o $@ liblzma_static.lib - $(STRIP) --strip-all $@ - -.PHONY: xz-clean -xz-clean: - -$(RM) $(XZ_OBJS) $(XZ_OBJS_STATIC) ../src/xz/xz_w32res.o xz-dynamic.exe xz.exe diff --git a/windows/README b/windows/README deleted file mode 100644 index 0e529de..0000000 --- a/windows/README +++ /dev/null @@ -1,155 +0,0 @@ - -XZ Utils on Windows -=================== - -Introduction - - This document explains how to build XZ Utils for Microsoft Windows - using MinGW (Minimalist GNU for Windows). - - This is currently experimental and has got very little testing. - No ABI stability is promised for liblzma.dll. - - -Why MinGW - - XZ Utils code is C99. It should be possible to compile at least - liblzma using any C99 compiler. Compiling the command line tools may - need a little extra work to get them built on new systems, because - they use some features that aren't standardized in POSIX. - - MinGW is free software. MinGW runtime provides some functions that - made porting the command line tools easier. Most(?) of the MinGW - runtime, which gets linked into the resulting binaries, is in the - public domain. - - While most C compilers nowadays support C99 well enough (including - most compilers for Windows), MSVC doesn't. It seems that Microsoft - has no plans to ever support C99. Thus, it is not possible to build - XZ Utils using MSVC without doing a lot of work to convert the code. - Using prebuilt liblzma from MSVC is possible though, since the - liblzma API headers are in C89 and contain some non-standard extra - hacks required by MSVC. - - -Getting and Installing MinGW - - You can download MinGW for 32-bit Windows from Sourceforge: - - http://sourceforge.net/project/showfiles.php?group_id=2435 - - It is enough to pick Automated MinGW Installer and MSYS Base System. - Using the automated installer, select at least runtime, w32api, - core compiler, and MinGW make. From MSYS you actually need only - certain tools, but it is easiest to just install the whole MSYS. - - To build for x86-64 version of Windows, you can download a snapshot - of MinGW targeting for 64-bit Windows: - - http://sourceforge.net/project/showfiles.php?group_id=202880 - - You can use the 32-bit MSYS also for 64-bit build, since we don't - link against anything in MSYS, just use the tools from it. You may - use the make tool from 32-bit MinGW (mingw32-make.exe) although - probably the make.exe from MSYS works too. - - Naturally you can pick the components manually, for example to try - the latest available GCC. It is also possible to use a cross-compiler - to build Windows binaries for example on GNU/Linux, or use Wine to - run the Windows binaries. However, these instructions focus on - building on Windows. - - -Building for 32-bit Windows - - Add MinGW and MSYS to PATH (adjust if you installed to non-default - location): - - set PATH=C:\MinGW\bin;C:\MSYS\1.0\bin;%PATH% - - Then it should be enough to just run mingw32-make in this directory - (the directory containing this README): - - mingw32-make - - -Building for 64-bit Windows - - For 64-bit build the PATH has to point to 64-bit MinGW: - - set PATH=C:\MinGW64\bin;C:\MSYS\1.0\bin;%PATH% - - You need to pass W64=1 to mingw32-make (or make if you don't have - mingw32-make): - - mingw32-make W64=1 - - -Additional Make Flags and Targets - - You may want to try some additional optimizations, which may or - may not make the code faster (and may or may not hit possible - compiler bugs more easily): - - mingw32-make CFLAGS="-O3 -fomit-frame-pointer -funroll-loops" - - If you want to enable assertions (the assert() macro), use DEBUG=1. - You may want to disable optimizations too if you plan to actually - debug the code. Never use DEBUG=1 for production builds! - - mingw32-make DEBUG=1 CFLAGS="-g -O0" - - To copy the built binaries and required headers into a clean - directory, use the pkg target: - - mingw32-make pkg - - It first removes a possibly existing pkg directory, and then - recreates it with the required files. - - TODO: The pkg target doesn't copy any license or other copyright - related information into the pkg directory. - - -Creating an Import Library for MSVC - - The included Makefile creates import library liblzma.a which works - only(?) with MinGW. To use liblzma.dll for MSVC, you need to create - liblzma.lib using the lib command from MSVC: - - lib /def:liblzma.def /out:liblzma.lib /machine:ix86 - - On x86-64, the /machine argument has to naturally be changed: - - lib /def:liblzma.def /out:liblzma.lib /machine:x64 - - -To Do - - - Test Win64 support and add instructions about getting x86-64 - version of MinGW. - - - Creating the import library for other compilers/linkers - - - Building with other compilers for Windows - - - liblzma currently uses cdecl. Would stdcall be more compatible? - - - Support building more size-optimized liblzma (the HAVE_SMALL - define and other things that are needed) - - - Support selecting which parts of liblzma to build to make the - library even smaller. - - - Use the configure script on Windows just like it is used on all - the other systems? - - -Bugs - - Report bugs to (in English or Finnish). - - Take into account that I don't have MSVC and I cannot very easily - test anything on Windows. As of writing, I have tried MinGW and the - resulting binaries only under 32-bit Wine. - diff --git a/windows/README-Windows.txt b/windows/README-Windows.txt new file mode 100644 index 0000000..536d08f --- /dev/null +++ b/windows/README-Windows.txt @@ -0,0 +1,115 @@ + +XZ Utils for Windows +==================== + +Introduction +------------ + + This package includes command line tools (xz.exe and a few others) + and the liblzma compression library from XZ Utils. You can find the + latest version and full source code from . + + The parts of the XZ Utils source code, that are relevant to this + binary package, are in the public domain. XZ Utils have been built + for this package with MinGW and linked statically against the MinGW + runtime and w32api packages. + + FIXME: Add license info about MinGW runtime and w32api. + + +Package contents +---------------- + + All executables and libraries in this package require msvcrt.dll. + It's included in all recent Windows versions. On Windows 95 it + might be missing, but once you get it somewhere, XZ Utils should + run even on Windows 95. + + There are two different versions of the executable and library files. + There is one directory for each type of binaries: + + bin_i486 32-bit x86 (i486 and up), Windows 95 and later + bin_x86-64 64-bit x86-64, Windows XP and later + + Each of the above directories have the following files: + + *.exe Command line tools. (It's useless to double-click + these; use the command prompt instead.) These have + been linked statically against liblzma, so they + don't require liblzma.dll. Thus, you can copy e.g. + xz.exe to a directory that is in PATH without copying + any other files from this package. + + liblzma.dll Shared version of the liblzma compression library. + This file is mostly useful to developers, although + some non-developers might use it to upgrade their + copy of liblzma. + + liblzma.a Static version of the liblzma compression library. + This file is useful only for developers. + + The rest of the directories contain architecture-independent files: + + doc Documentation in the plain text (TXT) format. The + manuals of the command line tools are provided also + in the PDF format. liblzma.def is in this directory + too. + + include C header files for liblzma. These should be + compatible with most C and C++ compilers. If you + have problems, try to fix it and send your fixes + upstream, or at least report a bug, thanks. + + +Linking against liblzma +----------------------- + +MinGW + + If you use MinGW, linking against liblzma.dll or liblzma.a should + be straightforward. You don't need an import library to link + against liblzma.dll, and for static linking, you don't need to + worry about the LZMA_API_STATIC macro. + + Note that the MinGW distribution includes liblzma. If you are + building packages that will be part of the MinGW distribution, you + probably should use the version of liblzma shipped in MinGW instead + of this package. + + +Microsoft Visual C++ + + To link against liblzma.dll, you need to create an import library + first. You need the "lib" command from MSVC and liblzma.def from + the "doc" directory of this package. Here is the command that works + on 32-bit x86: + + lib /def:liblzma.def /out:liblzma.lib /machine:ix86 + + On x86-64, the /machine argument has to naturally be changed: + + lib /def:liblzma.def /out:liblzma.lib /machine:x64 + + Linking against static liblzma should work too. Rename liblzma.a + to e.g. liblzma_static.lib and tell MSVC to link against it. You + also need to tell lzma.h to not use __declspec(dllimport) by defining + the macro LZMA_API_STATIC. You can do it either in the C/C++ code + + #define LZMA_API_STATIC + #include + + or by adding it to compiler options. + + +Other compilers + + If you are using some other compiler, see its documentation how to + create an import library (if it is needed). If it is simple, I + might consider including the instructions here. + + +Reporting bugs +-------------- + + Report bugs to (in English or Finnish). + diff --git a/windows/build.sh b/windows/build.sh new file mode 100644 index 0000000..42ab85f --- /dev/null +++ b/windows/build.sh @@ -0,0 +1,189 @@ +#!/bin/sh +# +############################################################################### +# +# Build a binary package on Windows with MinGW and MSYS +# +# Set the paths where MinGW, Mingw-w32, or MinGW-w64 are installed. If both +# MinGW and MinGW-w32 are specified, MinGW will be used. If there is no +# 32-bit or 64-bit compiler at all, it is simply skipped. +# +# Optionally, 7-Zip is used to create the final .zip and .7z packages. +# If you have installed it in the default directory, this script should +# find it automatically. Otherwise adjust the path manually. +# +# If you want to use a cross-compiler e.g. on GNU/Linux, this script won't +# work out of the box. You need to omit "make check" commands and replace +# u2d with some other tool to convert newlines from LF to CR+LF. You will +# also need to pass the --host option to configure. +# +############################################################################### +# +# Author: Lasse Collin +# +# This file has been put into the public domain. +# You can do whatever you want with this file. +# +############################################################################### + +MINGW_DIR=/c/devel/tools/mingw +MINGW_W32_DIR=/c/devel/tools/mingw-w32 +MINGW_W64_DIR=/c/devel/tools/mingw-w64 + +for SEVENZ_EXE in "$PROGRAMW6432/7-Zip/7z.exe" "$PROGRAMFILES/7-Zip/7z.exe" \ + "/c/Program Files/7-Zip/7z.exe" +do + [ -x "$SEVENZ_EXE" ] && break +done + + +# Abort immediatelly if something goes wrong. +set -e + +# White spaces in directory names may break things so catch them immediatelly. +case $(pwd) in + ' ' | ' ' | ' +') echo "Error: White space in the directory name" >&2; exit 1 ;; +esac + +# This sciprt can be run either at the top-level directory of the package +# or in the same directory containing this script. +if [ ! -f windows/build.sh ]; then + cd .. + if [ ! -f windows/build.sh ]; then + echo "You are in a wrong directory." >&2 + exit 1 + fi +fi + +# Run configure and copy the binaries to the given directory. +# +# The first argument is the directory where to copy the binaries. +# The rest of the arguments are passed to configure. +buildit() +{ + DESTDIR=$1 + BUILD=$2 + CFLAGS=$3 + + # Clean up if it was already configured. + [ -f Makefile ] && make distclean + + # Build the size-optimized binaries. Note that I don't want to + # provide size-optimized liblzma (shared nor static), because + # that isn't thread-safe now, and depending on bunch of things, + # maybe it will never be on Windows (pthreads-win32 helps but + # static liblzma might bit a bit tricky with it). + ./configure \ + --prefix= \ + --disable-nls \ + --disable-threads \ + --disable-shared \ + --enable-small \ + --build="$BUILD" \ + CFLAGS="$CFLAGS -Os" + make check + + mkdir -pv "$DESTDIR" + cp -v src/xzdec/{xz,lzma}dec.exe src/lzmainfo/lzmainfo.exe "$DESTDIR" + + make distclean + + # Build the normal speed-optimized binaries. Note that while + # --disable-threads has been documented to make some things + # thread-unsafe, it's not actually true with this combination + # of configure flags in XZ Utils 5.0.x. Things can (and probably + # will) change after 5.0.x, and this script will be updated too. + ./configure \ + --prefix= \ + --disable-nls \ + --disable-threads \ + --enable-dynamic=no \ + --build="$BUILD" \ + CFLAGS="$CFLAGS -O2" + make check + + cp -v src/xz/xz.exe src/liblzma/.libs/liblzma.a "$DESTDIR" + cp -v src/liblzma/.libs/liblzma-*.dll "$DESTDIR/liblzma.dll" + + strip -v "$DESTDIR/"* +} + +# Copy files and convert newlines from LF to CR+LF. Optinally add a suffix +# to the destination filename. +# +# The first argument is the destination directory. The second argument is +# the suffix to append to the filenames; use empty string if no extra suffix +# is wanted. The rest of the arguments are actual the filenames. +txtcp() +{ + DESTDIR=$1 + SUFFIX=$2 + shift 2 + for SRCFILE; do + DESTFILE="$DESTDIR/${SRCFILE##*/}$SUFFIX" + echo "Converting \`$SRCFILE' -> \`$DESTFILE'" + u2d < "$SRCFILE" > "$DESTFILE" + done +} + +# FIXME: Make sure that we don't get i686 or i586 code from the runtime. +# Actually i586 would be fine, but i686 probably not if the idea is to +# support even Win95. +# +# FIXME: Using i486 in the configure triplet may be wrong. +if [ -d "$MINGW_DIR" ]; then + # 32-bit x86, Win95 or later, using MinGW + PATH=$MINGW_DIR/bin:$PATH \ + buildit \ + pkg/bin_i486 \ + i486-pc-mingw32 \ + '-march=i486 -mtune=generic' +elif [ -d "$MINGW_W32_DIR" ]; then + # 32-bit x86, Win95 or later, using MinGW-w32 + PATH=$MINGW_W32_DIR/bin:$MINGW_W32_DIR/i686-w64-mingw32/bin:$PATH \ + buildit \ + pkg/bin_i486 \ + i486-w64-mingw32 \ + '-march=i486 -mtune=generic' +fi + +if [ -d "$MINGW_W64_DIR" ]; then + # 64-bit x86, WinXP or later, using MinGW-w64 + PATH=$MINGW_W64_DIR/bin:$MINGW_W64_DIR/x86_64-w64-mingw32/bin:$PATH \ + buildit \ + pkg/bin_x86-64 \ + x86_64-w64-mingw32 \ + '-march=x86-64 -mtune=generic' +fi + +# Copy the headers, the .def file, and the docs. +# They are the same for all architectures and builds. +mkdir -pv pkg/{include/lzma,doc/manuals} +txtcp pkg/include "" src/liblzma/api/lzma.h +txtcp pkg/include/lzma "" src/liblzma/api/lzma/*.h +txtcp pkg/doc "" src/liblzma/liblzma.def +txtcp pkg/doc .txt AUTHORS COPYING NEWS README THANKS TODO +txtcp pkg/doc "" doc/*.txt +txtcp pkg/doc/manuals "" doc/man/txt/{xz,xzdec,lzmainfo}.txt +cp -v doc/man/pdf-*/{xz,xzdec,lzmainfo}-*.pdf pkg/doc/manuals +txtcp pkg "" windows/README-Windows.txt + +# Create the package. This requires either 7z.exe from 7-Zip or zip.exe +# from Info-ZIP. If neither are found, this is skipped and you have to +# zip it yourself. 7-Zip tends to easily give the best compression ratio. +VER=$(sh version.sh) +cd pkg +if [ -x "$SEVENZ_EXE" ]; then + "$SEVENZ_EXE" a -tzip ../xz-$VER-windows.zip * + "$SEVENZ_EXE" a ../xz-$VER-windows.7z * +else + echo + echo "NOTE: 7z.exe was not found. xz-$VER-windows.zip" + echo " and xz-$VER-windows.7z were not created." + echo " You can create them yourself from the pkg directory." +fi + +echo +echo "Build completed successfully." +echo diff --git a/windows/config.h b/windows/config.h deleted file mode 100644 index 09dabdb..0000000 --- a/windows/config.h +++ /dev/null @@ -1,170 +0,0 @@ -/* Define to 1 if using x86 assembler optimizations. */ -/* #undef HAVE_ASM_X86 */ - -/* Define to 1 if using x86_64 assembler optimizations. */ -/* #undef HAVE_ASM_X86_64 */ - -/* Define to 1 if crc32 integrity check is enabled. */ -#define HAVE_CHECK_CRC32 1 - -/* Define to 1 if crc64 integrity check is enabled. */ -#define HAVE_CHECK_CRC64 1 - -/* Define to 1 if sha256 integrity check is enabled. */ -#define HAVE_CHECK_SHA256 1 - -/* Define to 1 if decoder components are enabled. */ -#define HAVE_DECODER 1 - -/* Define to 1 if arm decoder is enabled. */ -#define HAVE_DECODER_ARM 1 - -/* Define to 1 if armthumb decoder is enabled. */ -#define HAVE_DECODER_ARMTHUMB 1 - -/* Define to 1 if delta decoder is enabled. */ -#define HAVE_DECODER_DELTA 1 - -/* Define to 1 if ia64 decoder is enabled. */ -#define HAVE_DECODER_IA64 1 - -/* Define to 1 if lzma1 decoder is enabled. */ -#define HAVE_DECODER_LZMA1 1 - -/* Define to 1 if lzma2 decoder is enabled. */ -#define HAVE_DECODER_LZMA2 1 - -/* Define to 1 if powerpc decoder is enabled. */ -#define HAVE_DECODER_POWERPC 1 - -/* Define to 1 if sparc decoder is enabled. */ -#define HAVE_DECODER_SPARC 1 - -/* Define to 1 if subblock decoder is enabled. */ -/* #undef HAVE_DECODER_SUBBLOCK */ - -/* Define to 1 if x86 decoder is enabled. */ -#define HAVE_DECODER_X86 1 - -/* Define to 1 if encoder components are enabled. */ -#define HAVE_ENCODER 1 - -/* Define to 1 if arm encoder is enabled. */ -#define HAVE_ENCODER_ARM 1 - -/* Define to 1 if armthumb encoder is enabled. */ -#define HAVE_ENCODER_ARMTHUMB 1 - -/* Define to 1 if delta encoder is enabled. */ -#define HAVE_ENCODER_DELTA 1 - -/* Define to 1 if ia64 encoder is enabled. */ -#define HAVE_ENCODER_IA64 1 - -/* Define to 1 if lzma1 encoder is enabled. */ -#define HAVE_ENCODER_LZMA1 1 - -/* Define to 1 if lzma2 encoder is enabled. */ -#define HAVE_ENCODER_LZMA2 1 - -/* Define to 1 if powerpc encoder is enabled. */ -#define HAVE_ENCODER_POWERPC 1 - -/* Define to 1 if sparc encoder is enabled. */ -#define HAVE_ENCODER_SPARC 1 - -/* Define to 1 if subblock encoder is enabled. */ -/* #undef HAVE_ENCODER_SUBBLOCK */ - -/* Define to 1 if x86 encoder is enabled. */ -#define HAVE_ENCODER_X86 1 - -/* Define to 1 if the system supports fast unaligned memory access. */ -#define HAVE_FAST_UNALIGNED_ACCESS 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_INTTYPES_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_LIMITS_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_MEMORY_H 1 - -/* Define to 1 to enable bt2 match finder. */ -#define HAVE_MF_BT2 1 - -/* Define to 1 to enable bt3 match finder. */ -#define HAVE_MF_BT3 1 - -/* Define to 1 to enable bt4 match finder. */ -#define HAVE_MF_BT4 1 - -/* Define to 1 to enable hc3 match finder. */ -#define HAVE_MF_HC3 1 - -/* Define to 1 to enable hc4 match finder. */ -#define HAVE_MF_HC4 1 - -/* Define to 1 if optimizing for size. */ -/* #undef HAVE_SMALL */ - -/* Define to 1 if stdbool.h conforms to C99. */ -#define HAVE_STDBOOL_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDINT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDLIB_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRINGS_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRING_H 1 - -/* Define to 1 if the system has the type `uintptr_t'. */ -#define HAVE_UINTPTR_T 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TIME_H 1 - -/* Define to 1 if you have the `utime' function. */ -#define HAVE_UTIME 1 - -/* Define to 1 or 0, depending whether the compiler supports simple visibility - declarations. */ -#define HAVE_VISIBILITY 0 - -/* Define to 1 if the system has the type `_Bool'. */ -#define HAVE__BOOL 1 - -/* Define to the address where bug reports for this package should be sent. */ -#define PACKAGE_BUGREPORT "lasse.collin@tukaani.org" - -/* Define to the URL of the home page of this package. */ -#define PACKAGE_HOMEPAGE "http://tukaani.org/xz/" - -/* Define to the full name of this package. */ -#define PACKAGE_NAME "XZ Utils" - -/* The size of `size_t', as computed by sizeof. */ -#ifdef _WIN64 -# define SIZEOF_SIZE_T 8 -#else -# define SIZEOF_SIZE_T 4 -#endif - -/* Define to 1 if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most - significant byte first (like Motorola and SPARC, unlike Intel and VAX). */ -#if defined __BIG_ENDIAN__ -# define WORDS_BIGENDIAN 1 -#elif ! defined __LITTLE_ENDIAN__ -/* # undef WORDS_BIGENDIAN */ -#endif - -#define ASSUME_RAM 32 -- 2.39.2