cl_input.c

   1 /*
   2 Copyright (C) 1996-1997 Id Software, Inc.
   3
   4 This program is free software; you can redistribute it and/or
   5 modify it under the terms of the GNU General Public License
   6 as published by the Free Software Foundation; either version 2
   7 of the License, or (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12
  13 See the GNU General Public License for more details.
  14
  15 You should have received a copy of the GNU General Public License
  16 along with this program; if not, write to the Free Software
  17 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 */
  20 // cl.input.c  -- builds an intended movement command to send to the server
  21
  22 // Quake is a trademark of Id Software, Inc., (c) 1996 Id Software, Inc. All
  23 // rights reserved.
  24
  25 #include "quakedef.h"
  26 #include "csprogs.h"
  27
  28 /*
  29 ===============================================================================
  30
  31 KEY BUTTONS
  32
  33 Continuous button event tracking is complicated by the fact that two different
  34 input sources (say, mouse button 1 and the control key) can both press the
  35 same button, but the button should only be released when both of the
  36 pressing key have been released.
  37
  38 When a key event issues a button command (+forward, +attack, etc), it appends
  39 its key number as a parameter to the command so it can be matched up with
  40 the release.
  41
  42 state bit 0 is the current state of the key
  43 state bit 1 is edge triggered on the up to down transition
  44 state bit 2 is edge triggered on the down to up transition
  45
  46 ===============================================================================
  47 */
  48
  49
  50 kbutton_t       in_mlook, in_klook;
  51 kbutton_t       in_left, in_right, in_forward, in_back;
  52 kbutton_t       in_lookup, in_lookdown, in_moveleft, in_moveright;
  53 kbutton_t       in_strafe, in_speed, in_jump, in_attack, in_use;
  54 kbutton_t       in_up, in_down;
  55 // LordHavoc: added 6 new buttons
  56 kbutton_t       in_button3, in_button4, in_button5, in_button6, in_button7, in_button8;
  57 //even more
  58 kbutton_t       in_button9, in_button10, in_button11, in_button12, in_button13, in_button14, in_button15, in_button16;
  59
  60 int                     in_impulse;
  61
  62
  63
  64 void KeyDown (kbutton_t *b)
  65 {
  66         int k;
  67         const char *c;
  68
  69         c = Cmd_Argv(1);
  70         if (c[0])
  71                 k = atoi(c);
  72         else
  73                 k = -1;         // typed manually at the console for continuous down
  74
  75         if (k == b->down[0] || k == b->down[1])
  76                 return;         // repeating key
  77
  78         if (!b->down[0])
  79                 b->down[0] = k;
  80         else if (!b->down[1])
  81                 b->down[1] = k;
  82         else
  83         {
  84                 Con_Print("Three keys down for a button!\n");
  85                 return;
  86         }
  87
  88         if (b->state & 1)
  89                 return;         // still down
  90         b->state |= 1 + 2;      // down + impulse down
  91 }
  92
  93 void KeyUp (kbutton_t *b)
  94 {
  95         int k;
  96         const char *c;
  97
  98         c = Cmd_Argv(1);
  99         if (c[0])
 100                 k = atoi(c);
 101         else
 102         { // typed manually at the console, assume for unsticking, so clear all
 103                 b->down[0] = b->down[1] = 0;
 104                 b->state = 4;   // impulse up
 105                 return;
 106         }
 107
 108         if (b->down[0] == k)
 109                 b->down[0] = 0;
 110         else if (b->down[1] == k)
 111                 b->down[1] = 0;
 112         else
 113                 return;         // key up without coresponding down (menu pass through)
 114         if (b->down[0] || b->down[1])
 115                 return;         // some other key is still holding it down
 116
 117         if (!(b->state & 1))
 118                 return;         // still up (this should not happen)
 119         b->state &= ~1;         // now up
 120         b->state |= 4;          // impulse up
 121 }
 122
 123 void IN_KLookDown (void) {KeyDown(&in_klook);}
 124 void IN_KLookUp (void) {KeyUp(&in_klook);}
 125 void IN_MLookDown (void) {KeyDown(&in_mlook);}
 126 void IN_MLookUp (void)
 127 {
 128         KeyUp(&in_mlook);
 129         if ( !(in_mlook.state&1) && lookspring.value)
 130                 V_StartPitchDrift();
 131 }
 132 void IN_UpDown(void) {KeyDown(&in_up);}
 133 void IN_UpUp(void) {KeyUp(&in_up);}
 134 void IN_DownDown(void) {KeyDown(&in_down);}
 135 void IN_DownUp(void) {KeyUp(&in_down);}
 136 void IN_LeftDown(void) {KeyDown(&in_left);}
 137 void IN_LeftUp(void) {KeyUp(&in_left);}
 138 void IN_RightDown(void) {KeyDown(&in_right);}
 139 void IN_RightUp(void) {KeyUp(&in_right);}
 140 void IN_ForwardDown(void) {KeyDown(&in_forward);}
 141 void IN_ForwardUp(void) {KeyUp(&in_forward);}
 142 void IN_BackDown(void) {KeyDown(&in_back);}
 143 void IN_BackUp(void) {KeyUp(&in_back);}
 144 void IN_LookupDown(void) {KeyDown(&in_lookup);}
 145 void IN_LookupUp(void) {KeyUp(&in_lookup);}
 146 void IN_LookdownDown(void) {KeyDown(&in_lookdown);}
 147 void IN_LookdownUp(void) {KeyUp(&in_lookdown);}
 148 void IN_MoveleftDown(void) {KeyDown(&in_moveleft);}
 149 void IN_MoveleftUp(void) {KeyUp(&in_moveleft);}
 150 void IN_MoverightDown(void) {KeyDown(&in_moveright);}
 151 void IN_MoverightUp(void) {KeyUp(&in_moveright);}
 152
 153 void IN_SpeedDown(void) {KeyDown(&in_speed);}
 154 void IN_SpeedUp(void) {KeyUp(&in_speed);}
 155 void IN_StrafeDown(void) {KeyDown(&in_strafe);}
 156 void IN_StrafeUp(void) {KeyUp(&in_strafe);}
 157
 158 void IN_AttackDown(void) {KeyDown(&in_attack);}
 159 void IN_AttackUp(void) {KeyUp(&in_attack);}
 160
 161 void IN_UseDown(void) {KeyDown(&in_use);}
 162 void IN_UseUp(void) {KeyUp(&in_use);}
 163
 164 // LordHavoc: added 6 new buttons
 165 void IN_Button3Down(void) {KeyDown(&in_button3);}
 166 void IN_Button3Up(void) {KeyUp(&in_button3);}
 167 void IN_Button4Down(void) {KeyDown(&in_button4);}
 168 void IN_Button4Up(void) {KeyUp(&in_button4);}
 169 void IN_Button5Down(void) {KeyDown(&in_button5);}
 170 void IN_Button5Up(void) {KeyUp(&in_button5);}
 171 void IN_Button6Down(void) {KeyDown(&in_button6);}
 172 void IN_Button6Up(void) {KeyUp(&in_button6);}
 173 void IN_Button7Down(void) {KeyDown(&in_button7);}
 174 void IN_Button7Up(void) {KeyUp(&in_button7);}
 175 void IN_Button8Down(void) {KeyDown(&in_button8);}
 176 void IN_Button8Up(void) {KeyUp(&in_button8);}
 177
 178 void IN_Button9Down(void) {KeyDown(&in_button9);}
 179 void IN_Button9Up(void) {KeyUp(&in_button9);}
 180 void IN_Button10Down(void) {KeyDown(&in_button10);}
 181 void IN_Button10Up(void) {KeyUp(&in_button10);}
 182 void IN_Button11Down(void) {KeyDown(&in_button11);}
 183 void IN_Button11Up(void) {KeyUp(&in_button11);}
 184 void IN_Button12Down(void) {KeyDown(&in_button12);}
 185 void IN_Button12Up(void) {KeyUp(&in_button12);}
 186 void IN_Button13Down(void) {KeyDown(&in_button13);}
 187 void IN_Button13Up(void) {KeyUp(&in_button13);}
 188 void IN_Button14Down(void) {KeyDown(&in_button14);}
 189 void IN_Button14Up(void) {KeyUp(&in_button14);}
 190 void IN_Button15Down(void) {KeyDown(&in_button15);}
 191 void IN_Button15Up(void) {KeyUp(&in_button15);}
 192 void IN_Button16Down(void) {KeyDown(&in_button16);}
 193 void IN_Button16Up(void) {KeyUp(&in_button16);}
 194
 195 void IN_JumpDown (void) {KeyDown(&in_jump);}
 196 void IN_JumpUp (void) {KeyUp(&in_jump);}
 197
 198 void IN_Impulse (void) {in_impulse=atoi(Cmd_Argv(1));}
 199
 200 in_bestweapon_info_t in_bestweapon_info[IN_BESTWEAPON_MAX];
 201
 202 void IN_BestWeapon_Register(const char *name, int impulse, int weaponbit, int activeweaponcode, int ammostat, int ammomin)
 203 {
 204         int i;
 205         for(i = 0; i < IN_BESTWEAPON_MAX && in_bestweapon_info[i].impulse; ++i)
 206                 if(in_bestweapon_info[i].impulse == impulse)
 207                         break;
 208         if(i >= IN_BESTWEAPON_MAX)
 209         {
 210                 Con_Printf("no slot left for weapon definition; increase IN_BESTWEAPON_MAX\n");
 211                 return; // sorry
 212         }
 213         strlcpy(in_bestweapon_info[i].name, name, sizeof(in_bestweapon_info[i].name));
 214         in_bestweapon_info[i].impulse = impulse;
 215         if(weaponbit != -1)
 216                 in_bestweapon_info[i].weaponbit = weaponbit;
 217         if(activeweaponcode != -1)
 218                 in_bestweapon_info[i].activeweaponcode = activeweaponcode;
 219         if(ammostat != -1)
 220                 in_bestweapon_info[i].ammostat = ammostat;
 221         if(ammomin != -1)
 222                 in_bestweapon_info[i].ammomin = ammomin;
 223 }
 224
 225 void IN_BestWeapon_ResetData (void)
 226 {
 227         memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 228         IN_BestWeapon_Register("1", 1, IT_AXE, IT_AXE, STAT_SHELLS, 0);
 229         IN_BestWeapon_Register("2", 2, IT_SHOTGUN, IT_SHOTGUN, STAT_SHELLS, 1);
 230         IN_BestWeapon_Register("3", 3, IT_SUPER_SHOTGUN, IT_SUPER_SHOTGUN, STAT_SHELLS, 1);
 231         IN_BestWeapon_Register("4", 4, IT_NAILGUN, IT_NAILGUN, STAT_NAILS, 1);
 232         IN_BestWeapon_Register("5", 5, IT_SUPER_NAILGUN, IT_SUPER_NAILGUN, STAT_NAILS, 1);
 233         IN_BestWeapon_Register("6", 6, IT_GRENADE_LAUNCHER, IT_GRENADE_LAUNCHER, STAT_ROCKETS, 1);
 234         IN_BestWeapon_Register("7", 7, IT_ROCKET_LAUNCHER, IT_ROCKET_LAUNCHER, STAT_ROCKETS, 1);
 235         IN_BestWeapon_Register("8", 8, IT_LIGHTNING, IT_LIGHTNING, STAT_CELLS, 1);
 236         IN_BestWeapon_Register("9", 9, 128, 128, STAT_CELLS, 1); // generic energy weapon for mods
 237         IN_BestWeapon_Register("p", 209, 128, 128, STAT_CELLS, 1); // dpmod plasma gun
 238         IN_BestWeapon_Register("w", 210, 8388608, 8388608, STAT_CELLS, 1); // dpmod plasma wave cannon
 239         IN_BestWeapon_Register("l", 225, HIT_LASER_CANNON, HIT_LASER_CANNON, STAT_CELLS, 1); // hipnotic laser cannon
 240         IN_BestWeapon_Register("h", 226, HIT_MJOLNIR, HIT_MJOLNIR, STAT_CELLS, 0); // hipnotic mjolnir hammer
 241 }
 242
 243 void IN_BestWeapon_Register_f (void)
 244 {
 245         if(Cmd_Argc() == 7)
 246         {
 247                 IN_BestWeapon_Register(
 248                         Cmd_Argv(1),
 249                         atoi(Cmd_Argv(2)),
 250                         atoi(Cmd_Argv(3)),
 251                         atoi(Cmd_Argv(4)),
 252                         atoi(Cmd_Argv(5)),
 253                         atoi(Cmd_Argv(6))
 254                 );
 255         }
 256         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "clear"))
 257         {
 258                 memset(in_bestweapon_info, 0, sizeof(in_bestweapon_info));
 259         }
 260         else if(Cmd_Argc() == 2 && !strcmp(Cmd_Argv(1), "quake"))
 261         {
 262                 IN_BestWeapon_ResetData();
 263         }
 264         else
 265         {
 266                 Con_Printf("Usage: %s weaponshortname impulse itemcode activeweaponcode ammostat ammomin; %s clear; %s quake\n", Cmd_Argv(0), Cmd_Argv(0), Cmd_Argv(0));
 267         }
 268 }
 269
 270 void IN_BestWeapon (void)
 271 {
 272         int i, n;
 273         const char *t;
 274         if (Cmd_Argc() < 2)
 275         {
 276                 Con_Printf("bestweapon requires 1 or more parameters\n");
 277                 return;
 278         }
 279         for (i = 1;i < Cmd_Argc();i++)
 280         {
 281                 t = Cmd_Argv(i);
 282                 // figure out which weapon this character refers to
 283                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 284                 {
 285                         if (!strcmp(in_bestweapon_info[n].name, t))
 286                         {
 287                                 // we found out what weapon this character refers to
 288                                 // check if the inventory contains the weapon and enough ammo
 289                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 290                                 {
 291                                         // we found one of the weapons the player wanted
 292                                         // send an impulse to switch to it
 293                                         in_impulse = in_bestweapon_info[n].impulse;
 294                                         return;
 295                                 }
 296                                 break;
 297                         }
 298                 }
 299                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 300         }
 301         // if we couldn't find any of the weapons, there's nothing more we can do...
 302 }
 303
 304 void IN_CycleWeapon (void)
 305 {
 306         int i, n;
 307         int first = -1;
 308         qboolean found = false;
 309         const char *t;
 310         if (Cmd_Argc() < 2)
 311         {
 312                 Con_Printf("bestweapon requires 1 or more parameters\n");
 313                 return;
 314         }
 315         for (i = 1;i < Cmd_Argc();i++)
 316         {
 317                 t = Cmd_Argv(i);
 318                 // figure out which weapon this character refers to
 319                 for (n = 0;n < IN_BESTWEAPON_MAX && in_bestweapon_info[n].impulse;n++)
 320                 {
 321                         if (!strcmp(in_bestweapon_info[n].name, t))
 322                         {
 323                                 // we found out what weapon this character refers to
 324                                 // check if the inventory contains the weapon and enough ammo
 325                                 if ((cl.stats[STAT_ITEMS] & in_bestweapon_info[n].weaponbit) && (cl.stats[in_bestweapon_info[n].ammostat] >= in_bestweapon_info[n].ammomin))
 326                                 {
 327                                         // we found one of the weapons the player wanted
 328                                         if(first == -1)
 329                                                 first = n;
 330                                         if(found)
 331                                         {
 332                                                 in_impulse = in_bestweapon_info[n].impulse;
 333                                                 return;
 334                                         }
 335                                         if(cl.stats[STAT_ACTIVEWEAPON] == in_bestweapon_info[n].activeweaponcode)
 336                                                 found = true;
 337                                 }
 338                                 break;
 339                         }
 340                 }
 341                 // if we couldn't identify the weapon we just ignore it and continue checking for other weapons
 342         }
 343         if(first != -1)
 344         {
 345                 in_impulse = in_bestweapon_info[first].impulse;
 346                 return;
 347         }
 348         // if we couldn't find any of the weapons, there's nothing more we can do...
 349 }
 350
 351 /*
 352 ===============
 353 CL_KeyState
 354
 355 Returns 0.25 if a key was pressed and released during the frame,
 356 0.5 if it was pressed and held
 357 0 if held then released, and
 358 1.0 if held for the entire time
 359 ===============
 360 */
 361 float CL_KeyState (kbutton_t *key)
 362 {
 363         float           val;
 364         qboolean        impulsedown, impulseup, down;
 365
 366         impulsedown = key->state & 2;
 367         impulseup = key->state & 4;
 368         down = key->state & 1;
 369         val = 0;
 370
 371         if (impulsedown && !impulseup)
 372         {
 373                 if (down)
 374                         val = 0.5;      // pressed and held this frame
 375                 else
 376                         val = 0;        //      I_Error ();
 377         }
 378         if (impulseup && !impulsedown)
 379         {
 380                 if (down)
 381                         val = 0;        //      I_Error ();
 382                 else
 383                         val = 0;        // released this frame
 384         }
 385         if (!impulsedown && !impulseup)
 386         {
 387                 if (down)
 388                         val = 1.0;      // held the entire frame
 389                 else
 390                         val = 0;        // up the entire frame
 391         }
 392         if (impulsedown && impulseup)
 393         {
 394                 if (down)
 395                         val = 0.75;     // released and re-pressed this frame
 396                 else
 397                         val = 0.25;     // pressed and released this frame
 398         }
 399
 400         key->state &= 1;                // clear impulses
 401
 402         return val;
 403 }
 404
 405
 406
 407
 408 //==========================================================================
 409
 410 cvar_t cl_upspeed = {CVAR_SAVE, "cl_upspeed","400","vertical movement speed (while swimming or flying)"};
 411 cvar_t cl_forwardspeed = {CVAR_SAVE, "cl_forwardspeed","400","forward movement speed"};
 412 cvar_t cl_backspeed = {CVAR_SAVE, "cl_backspeed","400","backward movement speed"};
 413 cvar_t cl_sidespeed = {CVAR_SAVE, "cl_sidespeed","350","strafe movement speed"};
 414
 415 cvar_t cl_movespeedkey = {CVAR_SAVE, "cl_movespeedkey","2.0","how much +speed multiplies keyboard movement speed"};
 416
 417 cvar_t cl_yawspeed = {CVAR_SAVE, "cl_yawspeed","140","keyboard yaw turning speed"};
 418 cvar_t cl_pitchspeed = {CVAR_SAVE, "cl_pitchspeed","150","keyboard pitch turning speed"};
 419
 420 cvar_t cl_anglespeedkey = {CVAR_SAVE, "cl_anglespeedkey","1.5","how much +speed multiplies keyboard turning speed"};
 421
 422 cvar_t cl_movement = {CVAR_SAVE, "cl_movement", "0", "enables clientside prediction of your player movement"};
 423 cvar_t cl_movement_minping = {CVAR_SAVE, "cl_movement_minping", "0", "whether to use prediction when ping is lower than this value in milliseconds"};
 424 cvar_t cl_movement_track_canjump = {CVAR_SAVE, "cl_movement_track_canjump", "1", "track if the player released the jump key between two jumps to decide if he is able to jump or not; when off, this causes some \"sliding\" slightly above the floor when the jump key is held too long; if the mod allows repeated jumping by holding space all the time, this has to be set to zero too"};
 425 cvar_t cl_movement_maxspeed = {0, "cl_movement_maxspeed", "320", "how fast you can move (should match sv_maxspeed)"};
 426 cvar_t cl_movement_maxairspeed = {0, "cl_movement_maxairspeed", "30", "how fast you can move while in the air (should match sv_maxairspeed)"};
 427 cvar_t cl_movement_stopspeed = {0, "cl_movement_stopspeed", "100", "speed below which you will be slowed rapidly to a stop rather than sliding endlessly (should match sv_stopspeed)"};
 428 cvar_t cl_movement_friction = {0, "cl_movement_friction", "4", "how fast you slow down (should match sv_friction)"};
 429 cvar_t cl_movement_wallfriction = {0, "cl_movement_wallfriction", "1", "how fast you slow down while sliding along a wall (should match sv_wallfriction)"};
 430 cvar_t cl_movement_waterfriction = {0, "cl_movement_waterfriction", "-1", "how fast you slow down (should match sv_waterfriction), if less than 0 the cl_movement_friction variable is used instead"};
 431 cvar_t cl_movement_edgefriction = {0, "cl_movement_edgefriction", "2", "how much to slow down when you may be about to fall off a ledge (should match edgefriction)"};
 432 cvar_t cl_movement_stepheight = {0, "cl_movement_stepheight", "18", "how tall a step you can step in one instant (should match sv_stepheight)"};
 433 cvar_t cl_movement_accelerate = {0, "cl_movement_accelerate", "10", "how fast you accelerate (should match sv_accelerate)"};
 434 cvar_t cl_movement_airaccelerate = {0, "cl_movement_airaccelerate", "-1", "how fast you accelerate while in the air (should match sv_airaccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 435 cvar_t cl_movement_wateraccelerate = {0, "cl_movement_wateraccelerate", "-1", "how fast you accelerate while in water (should match sv_wateraccelerate), if less than 0 the cl_movement_accelerate variable is used instead"};
 436 cvar_t cl_movement_jumpvelocity = {0, "cl_movement_jumpvelocity", "270", "how fast you move upward when you begin a jump (should match the quakec code)"};
 437 cvar_t cl_movement_airaccel_qw = {0, "cl_movement_airaccel_qw", "1", "ratio of QW-style air control as opposed to simple acceleration (should match sv_airaccel_qw)"};
 438 cvar_t cl_movement_airaccel_sideways_friction = {0, "cl_movement_airaccel_sideways_friction", "0", "anti-sideways movement stabilization (should match sv_airaccel_sideways_friction)"};
 439
 440 cvar_t in_pitch_min = {0, "in_pitch_min", "-90", "how far downward you can aim (quake used -70"};
 441 cvar_t in_pitch_max = {0, "in_pitch_max", "90", "how far upward you can aim (quake used 80"};
 442
 443 cvar_t m_filter = {CVAR_SAVE, "m_filter","0", "smoothes mouse movement, less responsive but smoother aiming"};
 444
 445 cvar_t cl_netinputpacketsperserverpacket = {CVAR_SAVE, "cl_netinputpacketsperserverpacket", "1.0", "send this many input packets per server packet received"};
 446 cvar_t cl_netinputpacketspersecond = {CVAR_SAVE, "cl_netinputpacketspersecond","20", "how many input packets to send to server each second (only used on old servers, and note this is multiplied by cl_netinputpacketsperserverpacket)"};
 447 cvar_t cl_netinputpacketspersecond_qw = {CVAR_SAVE, "cl_netinputpacketspersecond_qw","72", "how many input packets to send to a qw server each second (only used on qw servers)"};
 448 cvar_t cl_netinputpacketlosstolerance = {CVAR_SAVE, "cl_netinputpacketlosstolerance", "1", "how many packets in a row can be lost without movement issues when using cl_movement (technically how many input messages to repeat in each packet that have not yet been acknowledged by the server), only affects DP7 and later servers (Quake uses 0, QuakeWorld uses 2, and just for comparison Quake3 uses 1)"};
 449
 450 cvar_t cl_nodelta = {0, "cl_nodelta", "0", "disables delta compression of non-player entities in QW network protocol"};
 451
 452 extern cvar_t v_flipped;
 453
 454 /*
 455 ================
 456 CL_AdjustAngles
 457
 458 Moves the local angle positions
 459 ================
 460 */
 461 void CL_AdjustAngles (void)
 462 {
 463         float   speed;
 464         float   up, down;
 465
 466         if (in_speed.state & 1)
 467                 speed = cl.realframetime * cl_anglespeedkey.value;
 468         else
 469                 speed = cl.realframetime;
 470
 471         if (!(in_strafe.state & 1))
 472         {
 473                 cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
 474                 cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
 475         }
 476         if (in_klook.state & 1)
 477         {
 478                 V_StopPitchDrift ();
 479                 cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
 480                 cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
 481         }
 482
 483         up = CL_KeyState (&in_lookup);
 484         down = CL_KeyState(&in_lookdown);
 485
 486         cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
 487         cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;
 488
 489         if (up || down)
 490                 V_StopPitchDrift ();
 491
 492         cl.viewangles[YAW] = ANGLEMOD(cl.viewangles[YAW]);
 493         if (cl.viewangles[YAW] >= 180)
 494                 cl.viewangles[YAW] -= 360;
 495         cl.viewangles[PITCH] = bound(in_pitch_min.value, cl.viewangles[PITCH], in_pitch_max.value);
 496         cl.viewangles[ROLL] = bound(-180, cl.viewangles[ROLL], 180);
 497 }
 498
 499 int cl_ignoremousemoves = 2;
 500
 501 /*
 502 ================
 503 CL_Input
 504
 505 Send the intended movement message to the server
 506 ================
 507 */
 508 void CL_Input (void)
 509 {
 510         float mx, my;
 511         static float old_mouse_x = 0, old_mouse_y = 0;
 512
 513         // clamp before the move to prevent starting with bad angles
 514         CL_AdjustAngles ();
 515
 516         if(v_flipped.integer)
 517                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 518
 519         // reset some of the command fields
 520         cl.cmd.forwardmove = 0;
 521         cl.cmd.sidemove = 0;
 522         cl.cmd.upmove = 0;
 523
 524         // get basic movement from keyboard
 525         if (in_strafe.state & 1)
 526         {
 527                 cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
 528                 cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
 529         }
 530
 531         cl.cmd.sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
 532         cl.cmd.sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
 533
 534         cl.cmd.upmove += cl_upspeed.value * CL_KeyState (&in_up);
 535         cl.cmd.upmove -= cl_upspeed.value * CL_KeyState (&in_down);
 536
 537         if (! (in_klook.state & 1) )
 538         {
 539                 cl.cmd.forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
 540                 cl.cmd.forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
 541         }
 542
 543         // adjust for speed key
 544         if (in_speed.state & 1)
 545         {
 546                 cl.cmd.forwardmove *= cl_movespeedkey.value;
 547                 cl.cmd.sidemove *= cl_movespeedkey.value;
 548                 cl.cmd.upmove *= cl_movespeedkey.value;
 549         }
 550
 551         in_mouse_x = 0;
 552         in_mouse_y = 0;
 553
 554         // allow mice or other external controllers to add to the move
 555         IN_Move ();
 556
 557         // ignore a mouse move if mouse was activated/deactivated this frame
 558         if (cl_ignoremousemoves)
 559         {
 560                 cl_ignoremousemoves--;
 561                 in_mouse_x = 0;
 562                 in_mouse_y = 0;
 563         }
 564
 565         // apply m_filter if it is on
 566         mx = in_mouse_x;
 567         my = in_mouse_y;
 568         if (m_filter.integer)
 569         {
 570                 in_mouse_x = (mx + old_mouse_x) * 0.5;
 571                 in_mouse_y = (my + old_mouse_y) * 0.5;
 572         }
 573         old_mouse_x = mx;
 574         old_mouse_y = my;
 575
 576         // if not in menu, apply mouse move to viewangles/movement
 577         if (!cl.csqc_wantsmousemove && in_client_mouse)
 578         {
 579                 float modulatedsensitivity = sensitivity.value * cl.sensitivityscale;
 580                 if (cl_prydoncursor.integer)
 581                 {
 582                         // mouse interacting with the scene, mostly stationary view
 583                         V_StopPitchDrift();
 584                         cl.cmd.cursor_screen[0] += in_mouse_x * modulatedsensitivity / vid.width;
 585                         cl.cmd.cursor_screen[1] += in_mouse_y * modulatedsensitivity / vid.height;
 586                 }
 587                 else if (in_strafe.state & 1)
 588                 {
 589                         // strafing mode, all looking is movement
 590                         V_StopPitchDrift();
 591                         cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 592                         if (noclip_anglehack)
 593                                 cl.cmd.upmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 594                         else
 595                                 cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 596                 }
 597                 else if ((in_mlook.state & 1) || freelook.integer)
 598                 {
 599                         // mouselook, lookstrafe causes turning to become strafing
 600                         V_StopPitchDrift();
 601                         if (lookstrafe.integer)
 602                                 cl.cmd.sidemove += m_side.value * in_mouse_x * modulatedsensitivity;
 603                         else
 604                                 cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 605                         cl.viewangles[PITCH] += m_pitch.value * in_mouse_y * modulatedsensitivity * cl.viewzoom;
 606                 }
 607                 else
 608                 {
 609                         // non-mouselook, yaw turning and forward/back movement
 610                         cl.viewangles[YAW] -= m_yaw.value * in_mouse_x * modulatedsensitivity * cl.viewzoom;
 611                         cl.cmd.forwardmove -= m_forward.value * in_mouse_y * modulatedsensitivity;
 612                 }
 613         }
 614
 615         if(v_flipped.integer)
 616         {
 617                 cl.viewangles[YAW] = -cl.viewangles[YAW];
 618                 cl.cmd.sidemove = -cl.cmd.sidemove;
 619         }
 620
 621         // clamp after the move to prevent rendering with bad angles
 622         CL_AdjustAngles ();
 623 }
 624
 625 #include "cl_collision.h"
 626
 627 void CL_UpdatePrydonCursor(void)
 628 {
 629         vec3_t temp;
 630
 631         if (!cl_prydoncursor.integer)
 632                 VectorClear(cl.cmd.cursor_screen);
 633
 634         /*
 635         if (cl.cmd.cursor_screen[0] < -1)
 636         {
 637                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - -1) * vid.width * sensitivity.value * cl.viewzoom;
 638                 cl.cmd.cursor_screen[0] = -1;
 639         }
 640         if (cl.cmd.cursor_screen[0] > 1)
 641         {
 642                 cl.viewangles[YAW] -= m_yaw.value * (cl.cmd.cursor_screen[0] - 1) * vid.width * sensitivity.value * cl.viewzoom;
 643                 cl.cmd.cursor_screen[0] = 1;
 644         }
 645         if (cl.cmd.cursor_screen[1] < -1)
 646         {
 647                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - -1) * vid.height * sensitivity.value * cl.viewzoom;
 648                 cl.cmd.cursor_screen[1] = -1;
 649         }
 650         if (cl.cmd.cursor_screen[1] > 1)
 651         {
 652                 cl.viewangles[PITCH] += m_pitch.value * (cl.cmd.cursor_screen[1] - 1) * vid.height * sensitivity.value * cl.viewzoom;
 653                 cl.cmd.cursor_screen[1] = 1;
 654         }
 655         */
 656         cl.cmd.cursor_screen[0] = bound(-1, cl.cmd.cursor_screen[0], 1);
 657         cl.cmd.cursor_screen[1] = bound(-1, cl.cmd.cursor_screen[1], 1);
 658         cl.cmd.cursor_screen[2] = 1;
 659
 660         // calculate current view matrix
 661         Matrix4x4_OriginFromMatrix(&r_refdef.view.matrix, cl.cmd.cursor_start);
 662         // calculate direction vector of cursor in viewspace by using frustum slopes
 663         VectorSet(temp, cl.cmd.cursor_screen[2] * 1000000, (v_flipped.integer ? -1 : 1) * cl.cmd.cursor_screen[0] * -r_refdef.view.frustum_x * 1000000, cl.cmd.cursor_screen[1] * -r_refdef.view.frustum_y * 1000000);
 664         Matrix4x4_Transform(&r_refdef.view.matrix, temp, cl.cmd.cursor_end);
 665         // trace from view origin to the cursor
 666         cl.cmd.cursor_fraction = CL_SelectTraceLine(cl.cmd.cursor_start, cl.cmd.cursor_end, cl.cmd.cursor_impact, cl.cmd.cursor_normal, &cl.cmd.cursor_entitynumber, (chase_active.integer || cl.intermission) ? &cl.entities[cl.playerentity].render : NULL);
 667 }
 668
 669 void CL_ClientMovement_ExpireOldMoves(void)
 670 {
 671         int i;
 672         int n;
 673         // remove stale queue items
 674         n = cl.movement_numqueue;
 675         cl.movement_numqueue = 0;
 676         if (cls.servermovesequence)
 677         {
 678                 for (i = 0;i < n;i++)
 679                 {
 680                         if (cl.movement_queue[i].sequence > cls.servermovesequence)
 681                                 cl.movement_queue[cl.movement_numqueue++] = cl.movement_queue[i];
 682                         else
 683                                 cl.movement_replay_canjump = cl.movement_queue[i].canjump;
 684                 }
 685         }
 686 }
 687
 688 void CL_ClientMovement_Input(qboolean buttonjump, qboolean buttoncrouch)
 689 {
 690         // if time has not advanced, do nothing
 691         if (cl.movecmd[0].msec <= 0)
 692                 return;
 693         // add to input queue if there is room
 694         if (cl.movement_numqueue < (int)(sizeof(cl.movement_queue)/sizeof(cl.movement_queue[0])))
 695         {
 696                 // add to input queue
 697                 cl.movement_queue[cl.movement_numqueue].sequence = cl.movecmd[0].sequence;
 698                 cl.movement_queue[cl.movement_numqueue].time = cl.movecmd[0].time;
 699                 cl.movement_queue[cl.movement_numqueue].frametime = cl.movecmd[0].msec * 0.001;
 700                 VectorCopy(cl.movecmd[0].viewangles, cl.movement_queue[cl.movement_numqueue].viewangles);
 701                 cl.movement_queue[cl.movement_numqueue].move[0] = cl.movecmd[0].forwardmove;
 702                 cl.movement_queue[cl.movement_numqueue].move[1] = cl.movecmd[0].sidemove;
 703                 cl.movement_queue[cl.movement_numqueue].move[2] = cl.movecmd[0].upmove;
 704                 cl.movement_queue[cl.movement_numqueue].jump = buttonjump;
 705                 cl.movement_queue[cl.movement_numqueue].crouch = buttoncrouch;
 706                 cl.movement_numqueue++;
 707         }
 708
 709         cl.movement_replay = true;
 710 }
 711
 712 typedef enum waterlevel_e
 713 {
 714         WATERLEVEL_NONE,
 715         WATERLEVEL_WETFEET,
 716         WATERLEVEL_SWIMMING,
 717         WATERLEVEL_SUBMERGED
 718 }
 719 waterlevel_t;
 720
 721 typedef struct cl_clientmovement_state_s
 722 {
 723         // position
 724         vec3_t origin;
 725         vec3_t velocity;
 726         // current bounding box (different if crouched vs standing)
 727         vec3_t mins;
 728         vec3_t maxs;
 729         // currently on the ground
 730         qboolean onground;
 731         // currently crouching
 732         qboolean crouched;
 733         // what kind of water (SUPERCONTENTS_LAVA for instance)
 734         int watertype;
 735         // how deep
 736         waterlevel_t waterlevel;
 737         // weird hacks when jumping out of water
 738         // (this is in seconds and counts down to 0)
 739         float waterjumptime;
 740
 741         // user command
 742         client_movementqueue_t q;
 743 }
 744 cl_clientmovement_state_t;
 745
 746 #define NUMOFFSETS 27
 747 static vec3_t offsets[NUMOFFSETS] =
 748 {
 749 // 1 no nudge (just return the original if this test passes)
 750         { 0.000,  0.000,  0.000},
 751 // 6 simple nudges
 752         { 0.000,  0.000,  0.125}, { 0.000,  0.000, -0.125},
 753         {-0.125,  0.000,  0.000}, { 0.125,  0.000,  0.000},
 754         { 0.000, -0.125,  0.000}, { 0.000,  0.125,  0.000},
 755 // 4 diagonal flat nudges
 756         {-0.125, -0.125,  0.000}, { 0.125, -0.125,  0.000},
 757         {-0.125,  0.125,  0.000}, { 0.125,  0.125,  0.000},
 758 // 8 diagonal upward nudges
 759         {-0.125,  0.000,  0.125}, { 0.125,  0.000,  0.125},
 760         { 0.000, -0.125,  0.125}, { 0.000,  0.125,  0.125},
 761         {-0.125, -0.125,  0.125}, { 0.125, -0.125,  0.125},
 762         {-0.125,  0.125,  0.125}, { 0.125,  0.125,  0.125},
 763 // 8 diagonal downward nudges
 764         {-0.125,  0.000, -0.125}, { 0.125,  0.000, -0.125},
 765         { 0.000, -0.125, -0.125}, { 0.000,  0.125, -0.125},
 766         {-0.125, -0.125, -0.125}, { 0.125, -0.125, -0.125},
 767         {-0.125,  0.125, -0.125}, { 0.125,  0.125, -0.125},
 768 };
 769
 770 qboolean CL_ClientMovement_Unstick(cl_clientmovement_state_t *s)
 771 {
 772         int i;
 773         vec3_t neworigin;
 774         for (i = 0;i < NUMOFFSETS;i++)
 775         {
 776                 VectorAdd(offsets[i], s->origin, neworigin);
 777                 if (!CL_Move(neworigin, cl.playercrouchmins, cl.playercrouchmaxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false).startsolid)
 778                 {
 779                         VectorCopy(neworigin, s->origin);
 780                         return true;
 781                 }
 782         }
 783         // if all offsets failed, give up
 784         return false;
 785 }
 786
 787 void CL_ClientMovement_UpdateStatus(cl_clientmovement_state_t *s)
 788 {
 789         vec3_t origin1, origin2;
 790         trace_t trace;
 791
 792         // make sure player is not stuck
 793         CL_ClientMovement_Unstick(s);
 794
 795         // set crouched
 796         if (s->q.crouch)
 797         {
 798                 // wants to crouch, this always works..
 799                 if (!s->crouched)
 800                         s->crouched = true;
 801         }
 802         else
 803         {
 804                 // wants to stand, if currently crouching we need to check for a
 805                 // low ceiling first
 806                 if (s->crouched)
 807                 {
 808                         trace = CL_Move(s->origin, cl.playerstandmins, cl.playerstandmaxs, s->origin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 809                         if (!trace.startsolid)
 810                                 s->crouched = false;
 811                 }
 812         }
 813         if (s->crouched)
 814         {
 815                 VectorCopy(cl.playercrouchmins, s->mins);
 816                 VectorCopy(cl.playercrouchmaxs, s->maxs);
 817         }
 818         else
 819         {
 820                 VectorCopy(cl.playerstandmins, s->mins);
 821                 VectorCopy(cl.playerstandmaxs, s->maxs);
 822         }
 823
 824         // set onground
 825         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + 1);
 826         VectorSet(origin2, s->origin[0], s->origin[1], s->origin[2] - 2);
 827         trace = CL_Move(origin1, s->mins, s->maxs, origin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 828         s->onground = trace.fraction < 1 && trace.plane.normal[2] > 0.7;
 829
 830         // set watertype/waterlevel
 831         VectorSet(origin1, s->origin[0], s->origin[1], s->origin[2] + s->mins[2] + 1);
 832         s->waterlevel = WATERLEVEL_NONE;
 833         s->watertype = CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK;
 834         if (s->watertype)
 835         {
 836                 s->waterlevel = WATERLEVEL_WETFEET;
 837                 origin1[2] = s->origin[2] + (s->mins[2] + s->maxs[2]) * 0.5f;
 838                 if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 839                 {
 840                         s->waterlevel = WATERLEVEL_SWIMMING;
 841                         origin1[2] = s->origin[2] + 22;
 842                         if (CL_Move(origin1, vec3_origin, vec3_origin, origin1, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsupercontents & SUPERCONTENTS_LIQUIDSMASK)
 843                                 s->waterlevel = WATERLEVEL_SUBMERGED;
 844                 }
 845         }
 846
 847         // water jump prediction
 848         if (s->onground || s->velocity[2] <= 0 || s->waterjumptime <= 0)
 849                 s->waterjumptime = 0;
 850 }
 851
 852 void CL_ClientMovement_Move(cl_clientmovement_state_t *s)
 853 {
 854         int bump;
 855         double t;
 856         vec_t f;
 857         vec3_t neworigin;
 858         vec3_t currentorigin2;
 859         vec3_t neworigin2;
 860         vec3_t primalvelocity;
 861         trace_t trace;
 862         trace_t trace2;
 863         trace_t trace3;
 864         CL_ClientMovement_UpdateStatus(s);
 865         VectorCopy(s->velocity, primalvelocity);
 866         for (bump = 0, t = s->q.frametime;bump < 8 && VectorLength2(s->velocity) > 0;bump++)
 867         {
 868                 VectorMA(s->origin, t, s->velocity, neworigin);
 869                 trace = CL_Move(s->origin, s->mins, s->maxs, neworigin, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 870                 if (trace.fraction < 1 && trace.plane.normal[2] == 0)
 871                 {
 872                         // may be a step or wall, try stepping up
 873                         // first move forward at a higher level
 874                         VectorSet(currentorigin2, s->origin[0], s->origin[1], s->origin[2] + cl.movevars_stepheight);
 875                         VectorSet(neworigin2, neworigin[0], neworigin[1], s->origin[2] + cl.movevars_stepheight);
 876                         trace2 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 877                         if (!trace2.startsolid)
 878                         {
 879                                 // then move down from there
 880                                 VectorCopy(trace2.endpos, currentorigin2);
 881                                 VectorSet(neworigin2, trace2.endpos[0], trace2.endpos[1], s->origin[2]);
 882                                 trace3 = CL_Move(currentorigin2, s->mins, s->maxs, neworigin2, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
 883                                 //Con_Printf("%f %f %f %f : %f %f %f %f : %f %f %f %f\n", trace.fraction, trace.endpos[0], trace.endpos[1], trace.endpos[2], trace2.fraction, trace2.endpos[0], trace2.endpos[1], trace2.endpos[2], trace3.fraction, trace3.endpos[0], trace3.endpos[1], trace3.endpos[2]);
 884                                 // accept the new trace if it made some progress
 885                                 if (fabs(trace3.endpos[0] - trace.endpos[0]) >= 0.03125 || fabs(trace3.endpos[1] - trace.endpos[1]) >= 0.03125)
 886                                 {
 887                                         trace = trace2;
 888                                         VectorCopy(trace3.endpos, trace.endpos);
 889                                 }
 890                         }
 891                 }
 892
 893                 // check if it moved at all
 894                 if (trace.fraction >= 0.001)
 895                         VectorCopy(trace.endpos, s->origin);
 896
 897                 // check if it moved all the way
 898                 if (trace.fraction == 1)
 899                         break;
 900
 901                 //if (trace.plane.normal[2] > 0.7)
 902                 //      s->onground = true;
 903
 904                 t -= t * trace.fraction;
 905
 906                 f = DotProduct(s->velocity, trace.plane.normal);
 907                 VectorMA(s->velocity, -f, trace.plane.normal, s->velocity);
 908         }
 909         if (s->waterjumptime > 0)
 910                 VectorCopy(primalvelocity, s->velocity);
 911 }
 912
 913
 914 void CL_ClientMovement_Physics_Swim(cl_clientmovement_state_t *s)
 915 {
 916         vec_t wishspeed;
 917         vec_t f;
 918         vec3_t wishvel;
 919         vec3_t wishdir;
 920
 921         // water jump only in certain situations
 922         // this mimics quakeworld code
 923         if (s->q.jump && s->waterlevel == 2 && s->velocity[2] >= -180)
 924         {
 925                 vec3_t forward;
 926                 vec3_t yawangles;
 927                 vec3_t spot;
 928                 VectorSet(yawangles, 0, s->q.viewangles[1], 0);
 929                 AngleVectors(yawangles, forward, NULL, NULL);
 930                 VectorMA(s->origin, 24, forward, spot);
 931                 spot[2] += 8;
 932                 if (CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
 933                 {
 934                         spot[2] += 24;
 935                         if (!CL_Move(spot, vec3_origin, vec3_origin, spot, MOVE_NOMONSTERS, NULL, 0, true, false, NULL, false).startsolid)
 936                         {
 937                                 VectorScale(forward, 50, s->velocity);
 938                                 s->velocity[2] = 310;
 939                                 s->waterjumptime = 2;
 940                                 s->onground = false;
 941                                 s->q.canjump = false;
 942                         }
 943                 }
 944         }
 945
 946         if (!VectorLength2(s->q.move))
 947         {
 948                 // drift towards bottom
 949                 VectorSet(wishvel, 0, 0, -60);
 950         }
 951         else
 952         {
 953                 // swim
 954                 vec3_t forward;
 955                 vec3_t right;
 956                 vec3_t up;
 957                 // calculate movement vector
 958                 AngleVectors(s->q.viewangles, forward, right, up);
 959                 VectorSet(up, 0, 0, 1);
 960                 VectorMAMAM(s->q.move[0], forward, s->q.move[1], right, s->q.move[2], up, wishvel);
 961         }
 962
 963         // split wishvel into wishspeed and wishdir
 964         wishspeed = VectorLength(wishvel);
 965         if (wishspeed)
 966                 VectorScale(wishvel, 1 / wishspeed, wishdir);
 967         else
 968                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
 969         wishspeed = min(wishspeed, cl.movevars_maxspeed) * 0.7;
 970
 971         if (s->crouched)
 972                 wishspeed *= 0.5;
 973
 974         if (s->waterjumptime <= 0)
 975         {
 976                 // water friction
 977                 f = 1 - s->q.frametime * cl.movevars_waterfriction * s->waterlevel;
 978                 f = bound(0, f, 1);
 979                 VectorScale(s->velocity, f, s->velocity);
 980
 981                 // water acceleration
 982                 f = wishspeed - DotProduct(s->velocity, wishdir);
 983                 if (f > 0)
 984                 {
 985                         f = min(cl.movevars_wateraccelerate * s->q.frametime * wishspeed, f);
 986                         VectorMA(s->velocity, f, wishdir, s->velocity);
 987                 }
 988
 989                 // holding jump button swims upward slowly
 990                 if (s->q.jump)
 991                 {
 992                         if (s->watertype & SUPERCONTENTS_LAVA)
 993                                 s->velocity[2] =  50;
 994                         else if (s->watertype & SUPERCONTENTS_SLIME)
 995                                 s->velocity[2] =  80;
 996                         else
 997                         {
 998                                 if (gamemode == GAME_NEXUIZ)
 999                                         s->velocity[2] = 200;
1000                                 else
1001                                         s->velocity[2] = 100;
1002                         }
1003                 }
1004         }
1005
1006         CL_ClientMovement_Move(s);
1007 }
1008
1009 void CL_ClientMovement_Physics_Walk(cl_clientmovement_state_t *s)
1010 {
1011         vec_t friction;
1012         vec_t wishspeed;
1013         vec_t addspeed;
1014         vec_t accelspeed;
1015         vec_t f;
1016         vec3_t forward;
1017         vec3_t right;
1018         vec3_t up;
1019         vec3_t wishvel;
1020         vec3_t wishdir;
1021         vec3_t yawangles;
1022         trace_t trace;
1023
1024         // jump if on ground with jump button pressed but only if it has been
1025         // released at least once since the last jump
1026         if (s->q.jump)
1027         {
1028                 if (s->onground && (s->q.canjump || !cl_movement_track_canjump.integer)) // FIXME remove this cvar again when canjump logic actually works, or maybe keep it for mods that allow "pogo-ing"
1029                 {
1030                         s->velocity[2] += cl.movevars_jumpvelocity;
1031                         s->onground = false;
1032                         s->q.canjump = false;
1033                 }
1034         }
1035         else
1036                 s->q.canjump = true;
1037
1038         // calculate movement vector
1039         VectorSet(yawangles, 0, s->q.viewangles[1], 0);
1040         AngleVectors(yawangles, forward, right, up);
1041         VectorMAM(s->q.move[0], forward, s->q.move[1], right, wishvel);
1042
1043         // split wishvel into wishspeed and wishdir
1044         wishspeed = VectorLength(wishvel);
1045         if (wishspeed)
1046                 VectorScale(wishvel, 1 / wishspeed, wishdir);
1047         else
1048                 VectorSet( wishdir, 0.0, 0.0, 0.0 );
1049         wishspeed = min(wishspeed, cl.movevars_maxspeed);
1050         if (s->crouched)
1051                 wishspeed *= 0.5;
1052
1053         // check if onground
1054         if (s->onground)
1055         {
1056                 // apply edge friction
1057                 f = sqrt(s->velocity[0] * s->velocity[0] + s->velocity[1] * s->velocity[1]);
1058                 friction = cl.movevars_friction;
1059                 if (f > 0 && cl.movevars_edgefriction != 1)
1060                 {
1061                         vec3_t neworigin2;
1062                         vec3_t neworigin3;
1063                         // note: QW uses the full player box for the trace, and yet still
1064                         // uses s->origin[2] + s->mins[2], which is clearly an bug, but
1065                         // this mimics it for compatibility
1066                         VectorSet(neworigin2, s->origin[0] + s->velocity[0]*(16/f), s->origin[1] + s->velocity[1]*(16/f), s->origin[2] + s->mins[2]);
1067                         VectorSet(neworigin3, neworigin2[0], neworigin2[1], neworigin2[2] - 34);
1068                         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1069                                 trace = CL_Move(neworigin2, s->mins, s->maxs, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1070                         else
1071                                 trace = CL_Move(neworigin2, vec3_origin, vec3_origin, neworigin3, MOVE_NORMAL, NULL, SUPERCONTENTS_SOLID | SUPERCONTENTS_BODY | SUPERCONTENTS_PLAYERCLIP, true, true, NULL, false);
1072                         if (trace.fraction == 1 && !trace.startsolid)
1073                                 friction *= cl.movevars_edgefriction;
1074                 }
1075                 // apply ground friction
1076                 f = 1 - s->q.frametime * friction * ((f < cl.movevars_stopspeed) ? (cl.movevars_stopspeed / f) : 1);
1077                 f = max(f, 0);
1078                 VectorScale(s->velocity, f, s->velocity);
1079                 addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1080                 if (addspeed > 0)
1081                 {
1082                         accelspeed = min(cl.movevars_accelerate * s->q.frametime * wishspeed, addspeed);
1083                         VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1084                 }
1085                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->q.frametime;
1086                 if (cls.protocol == PROTOCOL_QUAKEWORLD)
1087                         s->velocity[2] = 0;
1088                 if (VectorLength2(s->velocity))
1089                         CL_ClientMovement_Move(s);
1090         }
1091         else
1092         {
1093                 if (s->waterjumptime <= 0)
1094                 {
1095                         vec_t f;
1096                         vec_t vel_straight;
1097                         vec_t vel_z;
1098                         vec3_t vel_perpend;
1099
1100                         // apply air speed limit
1101                         wishspeed = min(wishspeed, cl.movevars_maxairspeed);
1102
1103                         /*
1104                         addspeed = wishspeed - DotProduct(s->velocity, wishdir);
1105                         if (addspeed > 0)
1106                         {
1107                                 accelspeed = min(cl.movevars_accelerate * s->q.frametime * wishspeed, addspeed);
1108                                 VectorMA(s->velocity, accelspeed, wishdir, s->velocity);
1109                         }
1110                         */
1111
1112                         vel_straight = DotProduct(s->velocity, wishdir);
1113                         vel_z = s->velocity[2];
1114                         VectorMA(s->velocity, -vel_straight, wishdir, vel_perpend);
1115                         vel_perpend[2] -= vel_z;
1116
1117                         f = wishspeed - vel_straight;
1118                         if(f > 0)
1119                                 vel_straight += min(f, cl.movevars_airaccelerate * s->q.frametime * wishspeed) * cl.movevars_airaccel_qw;
1120                         if(wishspeed > 0)
1121                                 vel_straight += min(wishspeed, cl.movevars_airaccelerate * s->q.frametime * wishspeed) * (1 - cl.movevars_airaccel_qw);
1122
1123                         VectorM(1 - (s->q.frametime * (wishspeed / cl.movevars_maxairspeed) * cl.movevars_airaccel_sideways_friction), vel_perpend, vel_perpend);
1124
1125                         VectorMA(vel_perpend, vel_straight, wishdir, s->velocity);
1126                         s->velocity[2] += vel_z;
1127                 }
1128                 s->velocity[2] -= cl.movevars_gravity * cl.movevars_entgravity * s->q.frametime;
1129                 CL_ClientMovement_Move(s);
1130         }
1131 }
1132
1133 void CL_ClientMovement_PlayerMove(cl_clientmovement_state_t *s)
1134 {
1135         //Con_Printf(" %f", frametime);
1136         if (!s->q.jump)
1137                 s->q.canjump = true;
1138         s->waterjumptime -= s->q.frametime;
1139         CL_ClientMovement_UpdateStatus(s);
1140         if (s->waterlevel >= WATERLEVEL_SWIMMING)
1141                 CL_ClientMovement_Physics_Swim(s);
1142         else
1143                 CL_ClientMovement_Physics_Walk(s);
1144 }
1145
1146 extern cvar_t slowmo;
1147 void CL_UpdateMoveVars(void)
1148 {
1149         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1150                 cl.movevars_packetinterval = 1.0 / bound(1, cl_netinputpacketspersecond_qw.value, 100);
1151         else if (cl.stats[STAT_MOVEVARS_TICRATE])
1152         {
1153                 cl.movevars_packetinterval = cl.statsf[STAT_MOVEVARS_TICRATE] * cl.statsf[STAT_MOVEVARS_TIMESCALE] / bound(1, cl_netinputpacketsperserverpacket.value, 10);
1154                 cl.movevars_timescale = cl.statsf[STAT_MOVEVARS_TIMESCALE];
1155                 cl.movevars_gravity = cl.statsf[STAT_MOVEVARS_GRAVITY];
1156                 cl.movevars_stopspeed = cl.statsf[STAT_MOVEVARS_STOPSPEED] ;
1157                 cl.movevars_maxspeed = cl.statsf[STAT_MOVEVARS_MAXSPEED];
1158                 cl.movevars_spectatormaxspeed = cl.statsf[STAT_MOVEVARS_SPECTATORMAXSPEED];
1159                 cl.movevars_accelerate = cl.statsf[STAT_MOVEVARS_ACCELERATE];
1160                 cl.movevars_airaccelerate = cl.statsf[STAT_MOVEVARS_AIRACCELERATE];
1161                 cl.movevars_wateraccelerate = cl.statsf[STAT_MOVEVARS_WATERACCELERATE];
1162                 cl.movevars_entgravity = cl.statsf[STAT_MOVEVARS_ENTGRAVITY];
1163                 cl.movevars_jumpvelocity = cl.statsf[STAT_MOVEVARS_JUMPVELOCITY];
1164                 cl.movevars_edgefriction = cl.statsf[STAT_MOVEVARS_EDGEFRICTION];
1165                 cl.movevars_maxairspeed = cl.statsf[STAT_MOVEVARS_MAXAIRSPEED];
1166                 cl.movevars_stepheight = cl.statsf[STAT_MOVEVARS_STEPHEIGHT];
1167                 cl.movevars_airaccel_qw = cl.statsf[STAT_MOVEVARS_AIRACCEL_QW];
1168                 cl.movevars_airaccel_sideways_friction = cl.statsf[STAT_MOVEVARS_AIRACCEL_SIDEWAYS_FRICTION];
1169                 cl.movevars_friction = cl.statsf[STAT_MOVEVARS_FRICTION];
1170                 cl.movevars_wallfriction = cl.statsf[STAT_MOVEVARS_WALLFRICTION];
1171                 cl.movevars_waterfriction = cl.statsf[STAT_MOVEVARS_WATERFRICTION];
1172         }
1173         else
1174         {
1175                 cl.movevars_packetinterval = slowmo.value / bound(1, cl_netinputpacketspersecond.value, 100);
1176                 cl.movevars_timescale = slowmo.value;
1177                 cl.movevars_gravity = sv_gravity.value;
1178                 cl.movevars_stopspeed = cl_movement_stopspeed.value;
1179                 cl.movevars_maxspeed = cl_movement_maxspeed.value;
1180                 cl.movevars_spectatormaxspeed = cl_movement_maxspeed.value;
1181                 cl.movevars_accelerate = cl_movement_accelerate.value;
1182                 cl.movevars_airaccelerate = cl_movement_airaccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_airaccelerate.value;
1183                 cl.movevars_wateraccelerate = cl_movement_wateraccelerate.value < 0 ? cl_movement_accelerate.value : cl_movement_wateraccelerate.value;
1184                 cl.movevars_friction = cl_movement_friction.value;
1185                 cl.movevars_wallfriction = cl_movement_wallfriction.value;
1186                 cl.movevars_waterfriction = cl_movement_waterfriction.value < 0 ? cl_movement_friction.value : cl_movement_waterfriction.value;
1187                 cl.movevars_entgravity = 1;
1188                 cl.movevars_jumpvelocity = cl_movement_jumpvelocity.value;
1189                 cl.movevars_edgefriction = cl_movement_edgefriction.value;
1190                 cl.movevars_maxairspeed = cl_movement_maxairspeed.value;
1191                 cl.movevars_stepheight = cl_movement_stepheight.value;
1192                 cl.movevars_airaccel_qw = cl_movement_airaccel_qw.value;
1193                 cl.movevars_airaccel_sideways_friction = cl_movement_airaccel_sideways_friction.value;
1194         }
1195 }
1196
1197 void CL_ClientMovement_Replay(void)
1198 {
1199         int i;
1200         qboolean canjump;
1201         double totalmovetime;
1202         cl_clientmovement_state_t s;
1203
1204         CL_ClientMovement_ExpireOldMoves();
1205
1206         // set up starting state for the series of moves
1207         memset(&s, 0, sizeof(s));
1208         VectorCopy(cl.entities[cl.playerentity].state_current.origin, s.origin);
1209         VectorCopy(cl.mvelocity[0], s.velocity);
1210         s.crouched = true; // will be updated on first move
1211         //Con_Printf("movement replay starting org %f %f %f vel %f %f %f\n", s.origin[0], s.origin[1], s.origin[2], s.velocity[0], s.velocity[1], s.velocity[2]);
1212
1213         totalmovetime = 0;
1214         for (i = 0;i < cl.movement_numqueue - 1;i++)
1215                 totalmovetime += cl.movement_queue[i].frametime;
1216         cl.movement_predicted = totalmovetime * 1000.0 >= cl_movement_minping.value && cls.servermovesequence && (cl_movement.integer && !cls.demoplayback && cls.signon == SIGNONS && cl.stats[STAT_HEALTH] > 0 && !cl.intermission);
1217         //Con_Printf("%i = %.0f >= %.0f && %i && (%i && %i && %i == %i && %i > 0 && %i\n", cl.movement_predicted, totalmovetime * 1000.0, cl_movement_minping.value, cls.servermovesequence, cl_movement.integer, !cls.demoplayback, cls.signon, SIGNONS, cl.stats[STAT_HEALTH], !cl.intermission);
1218         if (cl.movement_predicted)
1219         {
1220                 //Con_Printf("%ims\n", cl.movecmd[0].msec);
1221
1222                 // replay the input queue to predict current location
1223                 // note: this relies on the fact there's always one queue item at the end
1224
1225                 canjump = cl.movement_replay_canjump;
1226                 for (i = 0;i < cl.movement_numqueue;i++)
1227                 {
1228                         s.q = cl.movement_queue[i];
1229                         s.q.canjump = canjump;
1230                         // if a move is more than 50ms, do it as two moves (matching qwsv)
1231                         if (s.q.frametime > 0.05)
1232                         {
1233                                 s.q.frametime *= 0.5;
1234                                 CL_ClientMovement_PlayerMove(&s);
1235                         }
1236                         CL_ClientMovement_PlayerMove(&s);
1237                         canjump = cl.movement_queue[i].canjump = s.q.canjump;
1238                 }
1239         }
1240         else
1241         {
1242                 // get the first movement queue entry to know whether to crouch and such
1243                 s.q = cl.movement_queue[0];
1244         }
1245         CL_ClientMovement_UpdateStatus(&s);
1246
1247         if (cl.movement_replay)
1248         {
1249                 cl.movement_replay = false;
1250                 // update interpolation timestamps if time has passed
1251                 if (cl.movement_time[0] != cl.movecmd[0].time)
1252                 {
1253                         cl.movement_time[1] = cl.movement_time[0];
1254                         cl.movement_time[0] = cl.movecmd[0].time;
1255                         cl.movement_time[2] = cl.time;
1256                         VectorCopy(cl.movement_origin, cl.movement_oldorigin);
1257                         //VectorCopy(s.origin, cl.entities[cl.playerentity].state_current.origin);
1258                         //VectorSet(cl.entities[cl.playerentity].state_current.angles, 0, cl.viewangles[1], 0);
1259                 }
1260
1261                 // update the interpolation target position and velocity
1262                 VectorCopy(s.origin, cl.movement_origin);
1263                 VectorCopy(s.velocity, cl.movement_velocity);
1264         }
1265         else if(cls.demoplayback) // for bob, speedometer
1266                 VectorCopy(cl.mvelocity[0], cl.movement_velocity);
1267
1268         // update the onground flag if appropriate
1269         if (cl.movement_predicted)
1270         {
1271                 // when predicted we simply set the flag according to the UpdateStatus
1272                 cl.onground = s.onground;
1273         }
1274         else
1275         {
1276                 // when not predicted, cl.onground is cleared by cl_parse.c each time
1277                 // an update packet is received, but can be forced on here to hide
1278                 // server inconsistencies in the onground flag
1279                 // (which mostly occur when stepping up stairs at very high framerates
1280                 //  where after the step up the move continues forward and not
1281                 //  downward so the ground is not detected)
1282                 //
1283                 // such onground inconsistencies can cause jittery gun bobbing and
1284                 // stair smoothing, so we set onground if UpdateStatus says so
1285                 if (s.onground)
1286                         cl.onground = true;
1287         }
1288
1289         // react to onground state changes (for gun bob)
1290         if (cl.onground)
1291         {
1292                 if (!cl.oldonground)
1293                         cl.hitgroundtime = cl.movecmd[0].time;
1294                 cl.lastongroundtime = cl.movecmd[0].time;
1295         }
1296         cl.oldonground = cl.onground;
1297 }
1298
1299 void QW_MSG_WriteDeltaUsercmd(sizebuf_t *buf, usercmd_t *from, usercmd_t *to)
1300 {
1301         int bits;
1302
1303         bits = 0;
1304         if (to->viewangles[0] != from->viewangles[0])
1305                 bits |= QW_CM_ANGLE1;
1306         if (to->viewangles[1] != from->viewangles[1])
1307                 bits |= QW_CM_ANGLE2;
1308         if (to->viewangles[2] != from->viewangles[2])
1309                 bits |= QW_CM_ANGLE3;
1310         if (to->forwardmove != from->forwardmove)
1311                 bits |= QW_CM_FORWARD;
1312         if (to->sidemove != from->sidemove)
1313                 bits |= QW_CM_SIDE;
1314         if (to->upmove != from->upmove)
1315                 bits |= QW_CM_UP;
1316         if (to->buttons != from->buttons)
1317                 bits |= QW_CM_BUTTONS;
1318         if (to->impulse != from->impulse)
1319                 bits |= QW_CM_IMPULSE;
1320
1321         MSG_WriteByte(buf, bits);
1322         if (bits & QW_CM_ANGLE1)
1323                 MSG_WriteAngle16i(buf, to->viewangles[0]);
1324         if (bits & QW_CM_ANGLE2)
1325                 MSG_WriteAngle16i(buf, to->viewangles[1]);
1326         if (bits & QW_CM_ANGLE3)
1327                 MSG_WriteAngle16i(buf, to->viewangles[2]);
1328         if (bits & QW_CM_FORWARD)
1329                 MSG_WriteShort(buf, to->forwardmove);
1330         if (bits & QW_CM_SIDE)
1331                 MSG_WriteShort(buf, to->sidemove);
1332         if (bits & QW_CM_UP)
1333                 MSG_WriteShort(buf, to->upmove);
1334         if (bits & QW_CM_BUTTONS)
1335                 MSG_WriteByte(buf, to->buttons);
1336         if (bits & QW_CM_IMPULSE)
1337                 MSG_WriteByte(buf, to->impulse);
1338         MSG_WriteByte(buf, to->msec);
1339 }
1340
1341 /*
1342 ==============
1343 CL_SendMove
1344 ==============
1345 */
1346 usercmd_t nullcmd; // for delta compression of qw moves
1347 void CL_SendMove(void)
1348 {
1349         int i, j, packetloss;
1350         int bits;
1351         sizebuf_t buf;
1352         unsigned char data[1024];
1353         double packettime;
1354         int msecdelta;
1355
1356         CL_ClientMovement_ExpireOldMoves();
1357
1358         // if playing a demo, do nothing
1359         if (!cls.netcon)
1360                 return;
1361
1362         // don't send too often or else network connections can get clogged by a high renderer framerate
1363         packettime = cl.movevars_packetinterval;
1364         // send input every frame in singleplayer
1365         if (cl.islocalgame)
1366                 packettime = 0;
1367         // send the current interpolation time
1368         cl.cmd.time = cl.time;
1369         cl.cmd.sequence = cls.netcon->outgoing_unreliable_sequence;
1370         if (cl.cmd.time < cl.lastpackettime + packettime && (cl.mtime[0] != cl.mtime[1] || !cl.movement_needupdate))
1371                 return;
1372         // try to round off the lastpackettime to a multiple of the packet interval
1373         // (this causes it to emit packets at a steady beat, and takes advantage
1374         //  of the time drift compensation in the cl.time code)
1375         if (packettime > 0)
1376                 cl.lastpackettime = floor(cl.cmd.time / packettime) * packettime;
1377         else
1378                 cl.lastpackettime = cl.cmd.time;
1379         // set the flag indicating that we sent a packet recently
1380         cl.movement_needupdate = false;
1381
1382         buf.maxsize = sizeof(data);
1383         buf.cursize = 0;
1384         buf.data = data;
1385
1386         // conditions for sending a move:
1387         // if the move advances time or if the game is paused (in which case time
1388         // is not advancing)
1389         // don't send a new input packet if the connection is still saturated from
1390         // the last one (or chat messages, etc)
1391         // note: this behavior comes from QW
1392         if ((cls.protocol == PROTOCOL_QUAKEWORLD || cls.signon == SIGNONS) && !NetConn_CanSend(cls.netcon) && !cl.islocalgame)
1393                 return;
1394
1395         // send the movement message
1396         // PROTOCOL_QUAKE        clc_move = 16 bytes total
1397         // PROTOCOL_QUAKEDP      clc_move = 16 bytes total
1398         // PROTOCOL_NEHAHRAMOVIE clc_move = 16 bytes total
1399         // PROTOCOL_DARKPLACES1  clc_move = 19 bytes total
1400         // PROTOCOL_DARKPLACES2  clc_move = 25 bytes total
1401         // PROTOCOL_DARKPLACES3  clc_move = 25 bytes total
1402         // PROTOCOL_DARKPLACES4  clc_move = 19 bytes total
1403         // PROTOCOL_DARKPLACES5  clc_move = 19 bytes total
1404         // PROTOCOL_DARKPLACES6  clc_move = 52 bytes total
1405         // PROTOCOL_DARKPLACES7  clc_move = 56 bytes total per move (can be up to 16 moves)
1406         // PROTOCOL_QUAKEWORLD   clc_move = 34 bytes total (typically, but can reach 43 bytes, or even 49 bytes with roll)
1407
1408         // set prydon cursor info
1409         CL_UpdatePrydonCursor();
1410
1411         // set button bits
1412         // LordHavoc: added 6 new buttons and use and chat buttons, and prydon cursor active button
1413         bits = 0;
1414         if (in_attack.state   & 3) bits |=   1;in_attack.state  &= ~2;
1415         if (in_jump.state     & 3) bits |=   2;in_jump.state    &= ~2;
1416         if (in_button3.state  & 3) bits |=   4;in_button3.state &= ~2;
1417         if (in_button4.state  & 3) bits |=   8;in_button4.state &= ~2;
1418         if (in_button5.state  & 3) bits |=  16;in_button5.state &= ~2;
1419         if (in_button6.state  & 3) bits |=  32;in_button6.state &= ~2;
1420         if (in_button7.state  & 3) bits |=  64;in_button7.state &= ~2;
1421         if (in_button8.state  & 3) bits |= 128;in_button8.state &= ~2;
1422         if (in_use.state      & 3) bits |= 256;in_use.state     &= ~2;
1423         if (key_dest != key_game || key_consoleactive) bits |= 512;
1424         if (cl_prydoncursor.integer) bits |= 1024;
1425         if (in_button9.state  & 3)  bits |=   2048;in_button9.state  &= ~2;
1426         if (in_button10.state  & 3) bits |=   4096;in_button10.state &= ~2;
1427         if (in_button11.state  & 3) bits |=   8192;in_button11.state &= ~2;
1428         if (in_button12.state  & 3) bits |=  16384;in_button12.state &= ~2;
1429         if (in_button13.state  & 3) bits |=  32768;in_button13.state &= ~2;
1430         if (in_button14.state  & 3) bits |=  65536;in_button14.state &= ~2;
1431         if (in_button15.state  & 3) bits |= 131072;in_button15.state &= ~2;
1432         if (in_button16.state  & 3) bits |= 262144;in_button16.state &= ~2;
1433         // button bits 19-31 unused currently
1434         // rotate/zoom view serverside if PRYDON_CLIENTCURSOR cursor is at edge of screen
1435         if (cl.cmd.cursor_screen[0] <= -1) bits |= 8;
1436         if (cl.cmd.cursor_screen[0] >=  1) bits |= 16;
1437         if (cl.cmd.cursor_screen[1] <= -1) bits |= 32;
1438         if (cl.cmd.cursor_screen[1] >=  1) bits |= 64;
1439         cl.cmd.buttons = bits;
1440
1441         // set impulse
1442         cl.cmd.impulse = in_impulse;
1443         in_impulse = 0;
1444
1445         // movement is set by input code (forwardmove/sidemove/upmove)
1446
1447         // set viewangles
1448         VectorCopy(cl.viewangles, cl.cmd.viewangles);
1449
1450         msecdelta = (int)(floor(cl.cmd.time * 1000) - floor(cl.movecmd[0].time * 1000));
1451         cl.cmd.msec = (unsigned char)bound(0, msecdelta, 255);
1452         // ridiculous value rejection (matches qw)
1453         if (cl.cmd.msec > 250)
1454                 cl.cmd.msec = 100;
1455
1456         cl.cmd.predicted = cl_movement.integer;
1457
1458         // always dump the first two messages, because they may contain leftover inputs from the last level
1459         if (cl.cmd.sequence <= 2)
1460                 cl.cmd.forwardmove = cl.cmd.sidemove = cl.cmd.upmove = cl.cmd.impulse = cl.cmd.buttons = 0;
1461
1462         // update the cl.movecmd array which holds the most recent moves
1463         for (i = CL_MAX_USERCMDS - 1;i >= 1;i--)
1464                 cl.movecmd[i] = cl.movecmd[i-1];
1465         cl.movecmd[0] = cl.cmd;
1466
1467         if (cls.protocol == PROTOCOL_QUAKEWORLD)
1468         {
1469                 int checksumindex;
1470
1471                 CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
1472
1473                 MSG_WriteByte(&buf, qw_clc_move);
1474                 // save the position for a checksum byte
1475                 checksumindex = buf.cursize;
1476                 MSG_WriteByte(&buf, 0);
1477                 // packet loss percentage
1478                 for (j = 0, packetloss = 0;j < NETGRAPH_PACKETS;j++)
1479                         if (cls.netcon->incoming_unreliablesize[j] == NETGRAPH_LOSTPACKET)
1480                                 packetloss++;
1481                 packetloss = packetloss * 100 / NETGRAPH_PACKETS;
1482                 MSG_WriteByte(&buf, packetloss);
1483                 // write most recent 3 moves
1484                 QW_MSG_WriteDeltaUsercmd(&buf, &nullcmd, &cl.movecmd[2]);
1485                 QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[2], &cl.movecmd[1]);
1486                 QW_MSG_WriteDeltaUsercmd(&buf, &cl.movecmd[1], &cl.movecmd[0]);
1487                 // calculate the checksum
1488                 buf.data[checksumindex] = COM_BlockSequenceCRCByteQW(buf.data + checksumindex + 1, buf.cursize - checksumindex - 1, cls.netcon->outgoing_unreliable_sequence);
1489                 // if delta compression history overflows, request no delta
1490                 if (cls.netcon->outgoing_unreliable_sequence - cl.qw_validsequence >= QW_UPDATE_BACKUP-1)
1491                         cl.qw_validsequence = 0;
1492                 // request delta compression if appropriate
1493                 if (cl.qw_validsequence && !cl_nodelta.integer && cls.state == ca_connected && !cls.demorecording)
1494                 {
1495                         cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = cl.qw_validsequence;
1496                         MSG_WriteByte(&buf, qw_clc_delta);
1497                         MSG_WriteByte(&buf, cl.qw_validsequence & 255);
1498                 }
1499                 else
1500                         cl.qw_deltasequence[cls.netcon->outgoing_unreliable_sequence & QW_UPDATE_MASK] = -1;
1501         }
1502         else if (cls.signon == SIGNONS)
1503         {
1504                 if (cls.protocol == PROTOCOL_QUAKE || cls.protocol == PROTOCOL_QUAKEDP || cls.protocol == PROTOCOL_NEHAHRAMOVIE || cls.protocol == PROTOCOL_NEHAHRABJP || cls.protocol == PROTOCOL_NEHAHRABJP2 || cls.protocol == PROTOCOL_NEHAHRABJP3)
1505                 {
1506                         CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
1507
1508                         // 5 bytes
1509                         MSG_WriteByte (&buf, clc_move);
1510                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1511                         // 3 bytes
1512                         for (i = 0;i < 3;i++)
1513                                 MSG_WriteAngle8i (&buf, cl.movecmd[0].viewangles[i]);
1514                         // 6 bytes
1515                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1516                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1517                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1518                         // 2 bytes
1519                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1520                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1521                 }
1522                 else if (cls.protocol == PROTOCOL_DARKPLACES2 || cls.protocol == PROTOCOL_DARKPLACES3)
1523                 {
1524                         CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
1525
1526                         // 5 bytes
1527                         MSG_WriteByte (&buf, clc_move);
1528                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1529                         // 12 bytes
1530                         for (i = 0;i < 3;i++)
1531                                 MSG_WriteAngle32f (&buf, cl.movecmd[0].viewangles[i]);
1532                         // 6 bytes
1533                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1534                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1535                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1536                         // 2 bytes
1537                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1538                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1539                 }
1540                 else if (cls.protocol == PROTOCOL_DARKPLACES1 || cls.protocol == PROTOCOL_DARKPLACES4 || cls.protocol == PROTOCOL_DARKPLACES5)
1541                 {
1542                         CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, false);
1543
1544                         // 5 bytes
1545                         MSG_WriteByte (&buf, clc_move);
1546                         MSG_WriteFloat (&buf, cl.movecmd[0].time); // last server packet time
1547                         // 6 bytes
1548                         for (i = 0;i < 3;i++)
1549                                 MSG_WriteAngle16i (&buf, cl.movecmd[0].viewangles[i]);
1550                         // 6 bytes
1551                         MSG_WriteCoord16i (&buf, cl.movecmd[0].forwardmove);
1552                         MSG_WriteCoord16i (&buf, cl.movecmd[0].sidemove);
1553                         MSG_WriteCoord16i (&buf, cl.movecmd[0].upmove);
1554                         // 2 bytes
1555                         MSG_WriteByte (&buf, cl.movecmd[0].buttons);
1556                         MSG_WriteByte (&buf, cl.movecmd[0].impulse);
1557                 }
1558                 else if (cls.signon == SIGNONS)
1559                 {
1560                         int maxusercmds;
1561                         usercmd_t *cmd;
1562
1563                         // FIXME: cl.movecmd[0].buttons & 16 is +button5, Nexuiz specific
1564                         CL_ClientMovement_Input((cl.movecmd[0].buttons & 2) != 0, (cl.movecmd[0].buttons & 16) != 0);
1565
1566                         // set the maxusercmds variable to limit how many should be sent
1567                         maxusercmds = bound(1, cl_netinputpacketlosstolerance.integer + 1, CL_MAX_USERCMDS);
1568                         // when movement prediction is off, there's not much point in repeating old input as it will just be ignored
1569                         if (!cl.cmd.predicted)
1570                                 maxusercmds = 1;
1571
1572                         // send the latest moves in order, the old ones will be
1573                         // ignored by the server harmlessly, however if the previous
1574                         // packets were lost these moves will be used
1575                         //
1576                         // this reduces packet loss impact on gameplay.
1577                         for (j = 0, cmd = &cl.movecmd[maxusercmds-1];j < maxusercmds;j++, cmd--)
1578                         {
1579                                 // don't repeat any stale moves
1580                                 if (cmd->sequence && cmd->sequence < cls.servermovesequence)
1581                                         continue;
1582                                 // 5/9 bytes
1583                                 MSG_WriteByte (&buf, clc_move);
1584                                 if (cls.protocol != PROTOCOL_DARKPLACES6)
1585                                         MSG_WriteLong (&buf, cmd->predicted ? cmd->sequence : 0);
1586                                 MSG_WriteFloat (&buf, cmd->time); // last server packet time
1587                                 // 6 bytes
1588                                 for (i = 0;i < 3;i++)
1589                                         MSG_WriteAngle16i (&buf, cmd->viewangles[i]);
1590                                 // 6 bytes
1591                                 MSG_WriteCoord16i (&buf, cmd->forwardmove);
1592                                 MSG_WriteCoord16i (&buf, cmd->sidemove);
1593                                 MSG_WriteCoord16i (&buf, cmd->upmove);
1594                                 // 5 bytes
1595                                 MSG_WriteLong (&buf, cmd->buttons);
1596                                 MSG_WriteByte (&buf, cmd->impulse);
1597                                 // PRYDON_CLIENTCURSOR
1598                                 // 30 bytes
1599                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[0] * 32767.0f));
1600                                 MSG_WriteShort (&buf, (short)(cmd->cursor_screen[1] * 32767.0f));
1601                                 MSG_WriteFloat (&buf, cmd->cursor_start[0]);
1602                                 MSG_WriteFloat (&buf, cmd->cursor_start[1]);
1603                                 MSG_WriteFloat (&buf, cmd->cursor_start[2]);
1604                                 MSG_WriteFloat (&buf, cmd->cursor_impact[0]);
1605                                 MSG_WriteFloat (&buf, cmd->cursor_impact[1]);
1606                                 MSG_WriteFloat (&buf, cmd->cursor_impact[2]);
1607                                 MSG_WriteShort (&buf, cmd->cursor_entitynumber);
1608                         }
1609                 }
1610         }
1611
1612         if (cls.protocol != PROTOCOL_QUAKEWORLD && buf.cursize)
1613         {
1614                 // ack the last few frame numbers
1615                 // (redundent to improve handling of client->server packet loss)
1616                 // for LATESTFRAMENUMS == 3 case this is 15 bytes
1617                 for (i = 0;i < LATESTFRAMENUMS;i++)
1618                 {
1619                         if (cl.latestframenums[i] > 0)
1620                         {
1621                                 if (developer_networkentities.integer >= 10)
1622                                         Con_Printf("send clc_ackframe %i\n", cl.latestframenums[i]);
1623                                 MSG_WriteByte(&buf, clc_ackframe);
1624                                 MSG_WriteLong(&buf, cl.latestframenums[i]);
1625                         }
1626                 }
1627         }
1628
1629         // PROTOCOL_DARKPLACES6 = 67 bytes per packet
1630         // PROTOCOL_DARKPLACES7 = 71 bytes per packet
1631
1632         // acknowledge any recently received data blocks
1633         for (i = 0;i < CL_MAX_DOWNLOADACKS && (cls.dp_downloadack[i].start || cls.dp_downloadack[i].size);i++)
1634         {
1635                 MSG_WriteByte(&buf, clc_ackdownloaddata);
1636                 MSG_WriteLong(&buf, cls.dp_downloadack[i].start);
1637                 MSG_WriteShort(&buf, cls.dp_downloadack[i].size);
1638                 cls.dp_downloadack[i].start = 0;
1639                 cls.dp_downloadack[i].size = 0;
1640         }
1641
1642         // send the reliable message (forwarded commands) if there is one
1643         if (buf.cursize || cls.netcon->message.cursize)
1644                 NetConn_SendUnreliableMessage(cls.netcon, &buf, cls.protocol, max(20*(buf.cursize+40), cl_rate.integer), false);
1645
1646         if (cls.netcon->message.overflowed)
1647         {
1648                 Con_Print("CL_SendMove: lost server connection\n");
1649                 CL_Disconnect();
1650                 Host_ShutdownServer();
1651         }
1652 }
1653
1654 /*
1655 ============
1656 CL_InitInput
1657 ============
1658 */
1659 void CL_InitInput (void)
1660 {
1661         Cmd_AddCommand ("+moveup",IN_UpDown, "swim upward");
1662         Cmd_AddCommand ("-moveup",IN_UpUp, "stop swimming upward");
1663         Cmd_AddCommand ("+movedown",IN_DownDown, "swim downward");
1664         Cmd_AddCommand ("-movedown",IN_DownUp, "stop swimming downward");
1665         Cmd_AddCommand ("+left",IN_LeftDown, "turn left");
1666         Cmd_AddCommand ("-left",IN_LeftUp, "stop turning left");
1667         Cmd_AddCommand ("+right",IN_RightDown, "turn right");
1668         Cmd_AddCommand ("-right",IN_RightUp, "stop turning right");
1669         Cmd_AddCommand ("+forward",IN_ForwardDown, "move forward");
1670         Cmd_AddCommand ("-forward",IN_ForwardUp, "stop moving forward");
1671         Cmd_AddCommand ("+back",IN_BackDown, "move backward");
1672         Cmd_AddCommand ("-back",IN_BackUp, "stop moving backward");
1673         Cmd_AddCommand ("+lookup", IN_LookupDown, "look upward");
1674         Cmd_AddCommand ("-lookup", IN_LookupUp, "stop looking upward");
1675         Cmd_AddCommand ("+lookdown", IN_LookdownDown, "look downward");
1676         Cmd_AddCommand ("-lookdown", IN_LookdownUp, "stop looking downward");
1677         Cmd_AddCommand ("+strafe", IN_StrafeDown, "activate strafing mode (move instead of turn)");
1678         Cmd_AddCommand ("-strafe", IN_StrafeUp, "deactivate strafing mode");
1679         Cmd_AddCommand ("+moveleft", IN_MoveleftDown, "strafe left");
1680         Cmd_AddCommand ("-moveleft", IN_MoveleftUp, "stop strafing left");
1681         Cmd_AddCommand ("+moveright", IN_MoverightDown, "strafe right");
1682         Cmd_AddCommand ("-moveright", IN_MoverightUp, "stop strafing right");
1683         Cmd_AddCommand ("+speed", IN_SpeedDown, "activate run mode (faster movement and turning)");
1684         Cmd_AddCommand ("-speed", IN_SpeedUp, "deactivate run mode");
1685         Cmd_AddCommand ("+attack", IN_AttackDown, "begin firing");
1686         Cmd_AddCommand ("-attack", IN_AttackUp, "stop firing");
1687         Cmd_AddCommand ("+jump", IN_JumpDown, "jump");
1688         Cmd_AddCommand ("-jump", IN_JumpUp, "end jump (so you can jump again)");
1689         Cmd_AddCommand ("impulse", IN_Impulse, "send an impulse number to server (select weapon, use item, etc)");
1690         Cmd_AddCommand ("+klook", IN_KLookDown, "activate keyboard looking mode, do not recenter view");
1691         Cmd_AddCommand ("-klook", IN_KLookUp, "deactivate keyboard looking mode");
1692         Cmd_AddCommand ("+mlook", IN_MLookDown, "activate mouse looking mode, do not recenter view");
1693         Cmd_AddCommand ("-mlook", IN_MLookUp, "deactivate mouse looking mode");
1694
1695         // LordHavoc: added use button
1696         Cmd_AddCommand ("+use", IN_UseDown, "use something (may be used by some mods)");
1697         Cmd_AddCommand ("-use", IN_UseUp, "stop using something");
1698
1699         // LordHavoc: added 6 new buttons
1700         Cmd_AddCommand ("+button3", IN_Button3Down, "activate button3 (behavior depends on mod)");
1701         Cmd_AddCommand ("-button3", IN_Button3Up, "deactivate button3");
1702         Cmd_AddCommand ("+button4", IN_Button4Down, "activate button4 (behavior depends on mod)");
1703         Cmd_AddCommand ("-button4", IN_Button4Up, "deactivate button4");
1704         Cmd_AddCommand ("+button5", IN_Button5Down, "activate button5 (behavior depends on mod)");
1705         Cmd_AddCommand ("-button5", IN_Button5Up, "deactivate button5");
1706         Cmd_AddCommand ("+button6", IN_Button6Down, "activate button6 (behavior depends on mod)");
1707         Cmd_AddCommand ("-button6", IN_Button6Up, "deactivate button6");
1708         Cmd_AddCommand ("+button7", IN_Button7Down, "activate button7 (behavior depends on mod)");
1709         Cmd_AddCommand ("-button7", IN_Button7Up, "deactivate button7");
1710         Cmd_AddCommand ("+button8", IN_Button8Down, "activate button8 (behavior depends on mod)");
1711         Cmd_AddCommand ("-button8", IN_Button8Up, "deactivate button8");
1712         Cmd_AddCommand ("+button9", IN_Button9Down, "activate button9 (behavior depends on mod)");
1713         Cmd_AddCommand ("-button9", IN_Button9Up, "deactivate button9");
1714         Cmd_AddCommand ("+button10", IN_Button10Down, "activate button10 (behavior depends on mod)");
1715         Cmd_AddCommand ("-button10", IN_Button10Up, "deactivate button10");
1716         Cmd_AddCommand ("+button11", IN_Button11Down, "activate button11 (behavior depends on mod)");
1717         Cmd_AddCommand ("-button11", IN_Button11Up, "deactivate button11");
1718         Cmd_AddCommand ("+button12", IN_Button12Down, "activate button12 (behavior depends on mod)");
1719         Cmd_AddCommand ("-button12", IN_Button12Up, "deactivate button12");
1720         Cmd_AddCommand ("+button13", IN_Button13Down, "activate button13 (behavior depends on mod)");
1721         Cmd_AddCommand ("-button13", IN_Button13Up, "deactivate button13");
1722         Cmd_AddCommand ("+button14", IN_Button14Down, "activate button14 (behavior depends on mod)");
1723         Cmd_AddCommand ("-button14", IN_Button14Up, "deactivate button14");
1724         Cmd_AddCommand ("+button15", IN_Button15Down, "activate button15 (behavior depends on mod)");
1725         Cmd_AddCommand ("-button15", IN_Button15Up, "deactivate button15");
1726         Cmd_AddCommand ("+button16", IN_Button16Down, "activate button16 (behavior depends on mod)");
1727         Cmd_AddCommand ("-button16", IN_Button16Up, "deactivate button16");
1728
1729         // LordHavoc: added bestweapon command
1730         Cmd_AddCommand ("bestweapon", IN_BestWeapon, "send an impulse number to server to select the first usable weapon out of several (example: 8 7 6 5 4 3 2 1)");
1731         Cmd_AddCommand ("cycleweapon", IN_CycleWeapon, "send an impulse number to server to select the next usable weapon out of several (example: 9 4 8) if you are holding one of these, and choose the first one if you are holding none of these");
1732         Cmd_AddCommand ("register_bestweapon", IN_BestWeapon_Register_f, "(for QC usage only) change weapon parameters to be used by bestweapon; stuffcmd this in ClientConnect");
1733
1734         Cvar_RegisterVariable(&cl_movement);
1735         Cvar_RegisterVariable(&cl_movement_minping);
1736         Cvar_RegisterVariable(&cl_movement_track_canjump);
1737         Cvar_RegisterVariable(&cl_movement_maxspeed);
1738         Cvar_RegisterVariable(&cl_movement_maxairspeed);
1739         Cvar_RegisterVariable(&cl_movement_stopspeed);
1740         Cvar_RegisterVariable(&cl_movement_friction);
1741         Cvar_RegisterVariable(&cl_movement_wallfriction);
1742         Cvar_RegisterVariable(&cl_movement_waterfriction);
1743         Cvar_RegisterVariable(&cl_movement_edgefriction);
1744         Cvar_RegisterVariable(&cl_movement_stepheight);
1745         Cvar_RegisterVariable(&cl_movement_accelerate);
1746         Cvar_RegisterVariable(&cl_movement_airaccelerate);
1747         Cvar_RegisterVariable(&cl_movement_wateraccelerate);
1748         Cvar_RegisterVariable(&cl_movement_jumpvelocity);
1749         Cvar_RegisterVariable(&cl_movement_airaccel_qw);
1750         Cvar_RegisterVariable(&cl_movement_airaccel_sideways_friction);
1751
1752         Cvar_RegisterVariable(&in_pitch_min);
1753         Cvar_RegisterVariable(&in_pitch_max);
1754         Cvar_RegisterVariable(&m_filter);
1755
1756         Cvar_RegisterVariable(&cl_netinputpacketsperserverpacket);
1757         Cvar_RegisterVariable(&cl_netinputpacketspersecond);
1758         Cvar_RegisterVariable(&cl_netinputpacketspersecond_qw);
1759         Cvar_RegisterVariable(&cl_netinputpacketlosstolerance);
1760
1761         Cvar_RegisterVariable(&cl_nodelta);
1762 }
1763